Nabertherm SAL 120/85
Nabertherm ·Made in Germany · In Active Production

Nabertherm SAL 120/85

Nabertherm SAL 120/85 — Forced Convection Furnaces.

The SAL 120/85 is a forced-convection pit-type furnace with a 120-litre chamber (450 × 450 × 600 mm) and a maximum temperature of 850 °C, heated electrically via a 3-phase connection. Its 80 kg charging weight and 400 kg unit mass distinguish it from the larger SAL 250/85 sibling in the series. It is intended for uniform heat treatment of loads lowered into the top-opening chamber.

Nabertherm SAL Series — Model Comparison & Selection

Model Chamber volume, LWeight, kgElectrical connectionMax temperature, °C
SAL 120/85 Current 1204003-phase850
SAL 250/85 2506003-phase850

Full specifications

Core Performance & Functional Specifications
Chamber volume 120 l
Chamber volume 120 l
Electrical connection 3-phase
Electrical connection 3-phase
Heating mfr 13
Inner dimensions (W × D × H) mfr 450 × 450 × 600 mm
Outer dimensions (W × D × H) mfr 1300 × 1100 × 1450 mm
Dimensions, Weight & Mechanical Design
Weight 400 kg
Weight 400 kg
Electrical, Power & Drive Specifications
Max. charging weight mfr 80
Operating Conditions, Environment & Protection
Max temperature 850 °C
Max temperature 850 °C

Description

Construction and series positioning

Thermal behaviour and load limits

Control and operation

Integration & Operating Notes

Electrical
Three-phase supply required; no single-phase option stated

The furnace is specified for a 3-phase electrical connection. The supply, protection and cable sizing must be engineered for the actual installed unit; no current or power rating is given in the supplied facts, so the nameplate must be consulted before sizing the feed.

Factory Specification Sheet
Process Limits
Charge must not exceed 80 kg

The maximum charging weight is 80 kg. Exceeding it overloads the charge support and the furnace structure; the limit applies to the total load placed in the 450 × 450 × 600 mm chamber, not to the 400 kg unit mass.

Factory Specification Sheet
Process Limits
850 °C ceiling is the absolute process limit

The maximum temperature of 850 °C must not be exceeded in any program step. No overshoot allowance is stated in the supplied facts; setpoint and controller limits should be configured so the chamber cannot run above this value.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the SAL 120/85 instead of the SAL 250/85?

Pick the SAL 120/85 when the charge fits the 450 × 450 × 600 mm chamber and weighs no more than 80 kg. The SAL 250/85 is the larger-chamber sibling; move to it when the workload exceeds the 120 l volume or the 80 kg charging limit.

What supply and protection does the 3-phase connection require?

The furnace is a 3-phase unit, but the supplied facts give no current or power rating. Size the feed, breaker and cable from the unit nameplate and the installation manual; do not assume a standard 3-phase circuit is adequate without that data.

What maintenance and accessories are not defined by the base data?

The supplied facts contain no maintenance schedule, service intervals, error codes or accessory list for this model. Controller options are covered only generically in the Prozesssteuerung digest; cables, recorders and consumables must be confirmed with the order documentation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF