Shimadzu AA-7800
Shimadzu ·Made in Japan · In Active Production

Shimadzu AA-7800

Shimadzu AA-7800 — Elemental analyzers.

The Shimadzu AA-7800 is a flame/graphite furnace atomic absorption spectrophotometer for elemental analysis in laboratory settings. No verified specifications, curves, or manual digests were supplied, so this card states only the model identity and category; all quantitative selection and integration data must be obtained from the factory specification sheet before design.

Full specifications

Description

Construction and positioning

Behavior under load and media

Installation, control, and operation

Integration & Operating Notes

Process Limits
Do not size the instrument without verified performance data

Because no verified detection limits, working ranges, or measurement conditions were supplied for the AA-7800, any commitment to a customer's required element, concentration range, or matrix is unsupported and risks invalid analytical results; request the factory specification sheet first.

Factory Specification Sheet (not supplied
Electrical
Electrical requirements are not documented in the supplied facts

Supply voltage, phase, current draw, and grounding requirements for the AA-7800 are absent from the verified data; the electrical design of the laboratory bench cannot be finalized until the instruction manual's electrical connection section is reviewed.

Instruction Manual, Electrical Connection (not supplied
Maintenance
Service intervals and consumables must come from the manual

No maintenance schedule, lamp/hollow-cathode source lifetimes, or consumable part numbers were provided; schedule preventive maintenance and spares only after obtaining the official manual and consumables list from Shimadzu.

Instruction Manual, Maintenance (not supplied

Selection & Integration Q&A

When should the AA-7800 be chosen over other variants in the Shimadzu AA series?

No sibling models or variant-specific facts were supplied, so a defensible comparison cannot be made. Request the Shimadzu AA series selection guide and confirm the required atomization mode, element set, and concentration range against the AA-7800 factory specification before choosing.

What adjacent system parts (gases, power, controller, sample introduction) must be confirmed for the AA-7800?

The verified facts contain no interface, gas, or electrical data. Obtain the instruction manual to confirm required gases, supply ratings, and any controller or autosampler connections; do not specify bench services or mating hardware until those sections are reviewed.

What mounting, environment, and duty-cycle limits apply to the AA-7800?

No environment, bench-load, or duty-cycle limits were provided in the verified facts. Consult the instruction manual's installation section for ambient temperature, humidity, ventilation, and exhaust requirements before siting the instrument.

What maintenance schedule and accessories are needed, and what is not included in base delivery?

The supplied facts list no maintenance intervals, consumables, or scope of delivery. Request the Shimadzu manual and accessory/consumables catalog to define lamp sources, sample introduction parts, and service intervals; base-delivery contents remain unverified.

Dimensional Drawings & Technical Documentation

Technical documentation