No photo available yet

Shimadzu ·Made in Japan · In Active Production

Shimadzu Imlayer

Shimadzu Imlayer — Life science instruments.

The Shimadzu Imlayer is a vacuum sublimation/evaporation device for matrix deposition onto a single glass slide, compatible with DHB, 9-AA, and CHCA matrices. It reaches 1×10⁻² Pa vacuum and up to 250°C, enabling controlled film formation for MALDI sample preparation. This model is the base configuration for manual slide processing in life science labs.

Full specifications

Description

Construction and positioning

Integration & Operating Notes

Process Limits
Do not exceed 250°C heater temperature

Operating above 250°C may degrade the matrix, damage the heater or slide, and invalidate results. The limit applies to the sample stage; ensure the temperature controller is calibrated and the setpoint does not overshoot during ramp-up.

Factory Specification Sheet
Process Limits
Vacuum must reach 1×10⁻² Pa for proper deposition

Insufficient vacuum leads to scattering and non-uniform matrix films. Verify the pump and chamber seals can achieve this level before each run; a lower vacuum may require longer pump-down or indicate a leak.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Imlayer over other matrix deposition methods?

Choose the Imlayer when you need controlled, reproducible matrix films on a single glass slide using DHB, 9-AA, or CHCA, and when vacuum sublimation/evaporation is preferred over dried-droplet or spray methods for uniformity.

Dimensional Drawings & Technical Documentation

Technical documentation