Shimadzu Lightnirs
Shimadzu Lightnirs — Life science instruments.
The Shimadzu Lightnirs is a compact near-infrared tissue oximeter using 3-wavelength semiconductor lasers and an avalanche photodiode to measure Oxy-Hb, Deoxy-Hb, and Total-Hb. Its 253×222×68 mm, 1.6 kg housing accepts 15 V from an AC adapter or lithium-ion battery and provides 3 digital and 10 analog inputs. It serves as a portable monitoring unit in life-science and clinical research settings.
Full specifications
| Light source | 3-wavelength near-infrared semiconductor laser |
| Wavelength | 780, 805, 830 nm |
| Measurement channels (Holder Type A, forehead) (Holder Type A, one unit) mfr | 2×8 (22ch) ch (Holder Type A, one unit) |
| Measurement channels (Holder Type A, dorsolateral prefrontal area) (Holder Type A, one unit) mfr | 2×4 (10ch)×2 ch (Holder Type A, one unit) |
| Measurement channels (Holder Type A, language area) (Holder Type A, one unit) mfr | 2×4 (10ch)×2 ch (Holder Type A, one unit) |
| Measurement channels (Holder Type A, dorsolateral prefrontal cortex + prefrontal area) (Holder Type A, two-unit connecti mfr | 3×10 (47ch) ch (Holder Type A, two-unit connecting system) |
| Measurement channels (Holder Type A, supplementary motor area) (Holder Type A, two-unit connecting system (both)) mfr | 3×5 (24ch)×2 ch (Holder Type A, two-unit connecting system (both)) |
| Measurement channels (Holder Type B, primary motor area) (Holder Type B) mfr | 2×8 (22ch) ch (Holder Type B) |
| Measurement channels (Holder Type B, visual area and frontal pole) (Holder Type B) mfr | 2×4 (10ch)×2 ch (Holder Type B) |
| Measurement channels (Holder Type B, frontal pole + visual cortex + somatosensory) (Holder Type B) mfr | 2×4+4×6 (48ch) ch (Holder Type B) |
| Measurement channels (Holder Type B, motor area) (Holder Type B) mfr | 4×8 (52ch) ch (Holder Type B) |
| Optical fiber pairs (selectable optical fiber) mfr | 8 pairs pairs (selectable optical fiber) |
| Number of subjects (study data) mfr | 8 (study data) |
| Measured region (study data) mfr | Frontal pole 3 × 3 (12-channel) (study data) |
| Rest period (block design) mfr | 10 sec (block design) |
| Oral tasting period (block design) mfr | 20 sec (block design) |
| Rest period after swallowing (block design) mfr | 30 sec (block design) |
| Jelly sample amount (4 types of jelly) mfr | about 5 g (4 types of jelly) |
| Scalable system configuration (system configuration) mfr | 4 up to 40 sets (system configuration) |
| L-type optic fiber cable expansion (L-type optic fiber cable) mfr | +12 sets (L-type optic fiber cable) |
Description
- Enclosure measures 253 mm width, 222 mm depth, and 68 mm height at 1.6 kg, allowing handheld or bench use. - Optical chain: three near-infrared semiconductor lasers (Class 1 per IEC-60825-1:2007) and an avalanche photodiode detector. ### Measurement behavior
- Concentrations are derived from 3-wavelength absorbance calculation, reporting changes in Oxy-Hb, Deoxy-Hb, and Total-Hb rather than absolute values. ### Installation and operation
- Powered by 15 V input from either an AC adapter or a lithium-ion battery, enabling field or bedside operation. - External interface provides 3 digital channels and 10 analog channels for synchronization or auxiliary signals. - Operating environment is limited to 30 °C and 45–85 % relative humidity without condensation; no PDF manual digest was supplied, so connection and control details beyond the above are not verified.
Integration & Operating Notes
The Lightnirs accepts 15 V input from either the supplied AC adapter or a lithium-ion battery. Connecting a supply outside this rating risks damage to the laser and detector electronics; verify adapter output and battery voltage before use.
Operation is specified at 30 °C and 45–85 % relative humidity with no condensation. Exceeding these conditions can degrade optical measurement stability and may invalidate results; provide climate control or avoid humid, condensing locations.
The external input interface exposes 3 digital and 10 analog channels. Integrators must provide compatible signal levels and connectors, and should document channel mapping for synchronization with external acquisition or trigger systems.
Selection & Integration Q&A
Provide a 15 V DC source via AC adapter or lithium-ion battery, and route 3 digital plus 10 analog channels to the external input connector. Confirm signal levels and connector types against the instrument before wiring.