Shimadzu Refrigerator Type Constant Temperature AND Humidity Chamber
Shimadzu Refrigerator Type Constant Temperature AND Humidity Chamber — Testing machines.
The Shimadzu Refrigerator Type Constant Temperature and Humidity Chamber is a refrigeration-based environmental test unit for controlled temperature and humidity conditioning. It serves as a chamber for stabilizing samples under combined thermal and humidity setpoints within a test system.
Full specifications
Description
Construction and positioning
- Refrigerator-type (compressor-driven) constant temperature and humidity chamber. - No verified dimensional, weight, or chamber-volume data are available. ### Behavior under load and in different media
- No digitized curve points, control ranges, or stability/ uniformity data were provided. ### Installation, connection, control and operation
- No PDF digests, wiring diagrams, or control descriptions were attached. - Electrical supply, refrigerant, water (if humidification requires it), and drain requirements are unverified and must be confirmed against the actual instruction manual before installation.
Integration & Operating Notes
No verified setpoint range, tolerance, or stability figures were supplied for this model. Operating outside the manufacturer's published envelope risks invalid test results and possible compressor or humidifier damage; obtain the official specification sheet before commissioning.
Refrigerator-type chambers draw compressor starting current and typically require a dedicated branch. No verified voltage, phase, or current data were provided, so the electrical design must be taken from the unit's nameplate and manual rather than assumed.
Humidity chambers generally require a specified water supply purity and a gravity drain. No verified water-quality, pressure, or drain requirements were supplied for this model; confirm them in the manual to avoid scale, contamination, or overflow.
Selection & Integration Q&A
Nameplate voltage, phase, current, and recommended breaker size are unverified. Confirm these from the unit label and manual, and verify that any external controller or data logger matches the chamber's sensor and interface types, which were not documented.
No verified clearance, ambient temperature, or ventilation requirements were provided. Refrigerator-type chambers normally need free airflow around the condenser and a level floor; confirm exact clearances and ambient limits in the manual before siting.
No maintenance intervals, consumables, or included-accessory list were supplied. Check the manual for humidifier water treatment, filter replacement, and any required drain or communication cables, since none are confirmed as part of the base unit.