Shimadzu SPM 9700HT Plus
Shimadzu SPM 9700HT Plus — Microscopes.
The SPM 9700HT Plus is a scanning probe microscope (SPM) from Shimadzu configured for high-throughput, large-area imaging with a standard 10 µm × 10 µm × 1 µm XYZ scanning range. It distinguishes itself within the series by offering multiple optional scan ranges up to 125 µm × 125 µm × 7 µm, while maintaining 0.2 nm XY and 0.01 nm Z resolution. It is intended for nanoscale surface topography and property mapping in materials and life science research where sample sizes up to 8.0 mm must be accommodated.
Full specifications
| Resolution | 0.2 nm (SPM-9700HT Plus) |
| Observation modes (* Option) mfr | Contact/Dynamic Phase/Force Modulation, Lateral (* Option) |
| Sample types accommodated mfr | Zeolite, Blended Polymer, Platinum Iridium Film, |
| Observation speed (HT scanner, Nano3D MappingTM Fast (Optional)) mfr | Ultra-fast observations achieved by improving pr (HT scanner, Nano3D MappingTM Fast (Optional)) |
| Physical property mapping time (Nano3D Mapping Fast (Optional)) mfr | Significantly reduced compared to the previous m (Nano3D Mapping Fast (Optional)) |
| Observation condition configuration (NanoAssist) mfr | Operating points and gain values configured auto (NanoAssist) |
| Head slide mechanism mfr | Cantilever does not need to be reconfigured; nex |
| Data analysis functions mfr | Surface roughness, particle data analysis, morph |
| Automated support functions mfr | M2M, IoT, Artificial Intelligence (AI) |
| Max sample size mfr | ø24 mm × 8 mm (SPM-9700HT Plus) |
| Vibration damping mechanism mfr | Mounted on SPM unit (SPM-9700HT Plus) |
| Scanner scan range (Middle Range Scanner (optional)) mfr | 30 μm (Middle Range Scanner (optional)) |
| Scanner scan range (Wide Range Scanner (optional)) mfr | 125 μm (Wide Range Scanner (optional)) |
| Scanner scan range (Deep-Type Scanner (optional)) mfr | 55 μm (Deep-Type Scanner (optional)) |
| Scanner scan range (Narrow Range Scanner (optional)) mfr | 2.5 μm (Narrow Range Scanner (optional)) |
| Cantilever mounting (Cantilever master (Optional)) mfr | Easy and secure mounting of the cantilever (Cantilever master (Optional)) |
| X/Y-axis control (Scan controller) mfr | ±211 V Always 16-bit resolution V (Scan controller) |
| Scanner scan range (HT Scanner (standard)) mfr | 10 μm (HT Scanner (standard)) |
Description
Construction and positioning
- The SPM 9700HT Plus is a standalone scanning probe microscope head with integrated XYZ scanner and sample stage. Samples are secured by magnet, simplifying mounting of conductive or magnetic samples. - Within the Shimadzu SPM series, this model is the high-throughput variant, offering larger standard scan ranges (10 µm × 10 µm × 1 µm) compared to base models, and supports optional scanners that extend the range to 30 µm × 30 µm × 5 µm, 55 µm × 55 µm × 13 µm, 125 µm × 125 µm × 7 µm, or 2.5 µm × 2.5 µm × 0.3 µm for high-resolution work. - The maximum sample size is 8.0 mm, accommodating a wide range of specimens without cutting. ### Behavior under load and in different modes
- The system delivers 0.2 nm XY resolution and 0.01 nm Z resolution, enabling atomic-scale step height measurements and fine surface texture analysis. - Scanning range selection directly affects resolution and maximum sample size; the optional 2.5 µm × 2.5 µm × 0.3 µm scanner is optimized for ultra-high-resolution imaging of small areas, while the 125 µm × 125 µm scanner trades resolution for large-area surveys. ### Installation, connection, and control
- The instrument requires a stable environment with low vibration and acoustic noise; typical SPM installations use an anti-vibration table and acoustic enclosure, though these are not explicitly listed in the provided facts. - Sample securing is via magnet, which implies the sample or sample holder must be magnetic or have a magnetic backing. Non-magnetic samples require appropriate sample plates or adhesives (not specified).
Integration & Operating Notes
Samples must be magnetic or mounted on a magnetic holder to be secured. Non-magnetic samples require alternative fixation methods such as adhesive tabs or mechanical clamps, which may affect flatness and vibration characteristics. Ensure the sample surface is clean and flat for reliable scanning.
The sample stage accepts specimens up to 8.0 mm in any dimension. Exceeding this may cause collision with the probe or scanner, potentially damaging the tip and scanner. Verify sample dimensions before mounting.
SPM measurements at sub-nanometer resolution are sensitive to mechanical vibrations and acoustic noise. Install the system on a rigid, vibration-isolated table and in an acoustically quiet area. Enclosures may be needed for demanding applications.
Selection & Integration Q&A
Choose the 9700HT Plus when you need a balance of large scan range (10 µm standard) and high resolution (0.2 nm XY, 0.01 nm Z) for samples up to 8.0 mm. For larger areas, consider optional scanners up to 125 µm; for ultra-high resolution on small areas, the 2.5 µm scanner is available. Base models may lack the high-throughput scanner or sample size capacity.
Samples must be secured by magnet, so they need to be magnetic or mounted on a magnetic holder. Maximum sample size is 8.0 mm. Non-magnetic samples require alternative fixation, which may affect stability. Ensure the sample surface is compatible with the probe approach and scanning.
Install the SPM on a vibration-isolated table in a temperature-controlled room with low acoustic noise. Avoid air drafts and direct sunlight. While not specified in the provided facts, typical SPM installations require stable temperature (±1°C) and humidity control to minimize drift during long scans.