No photo available yet
Shimadzu Tensile Testing System With Thermostatic Chamber
Shimadzu Tensile Testing System With Thermostatic Chamber — Testing machines.
The Shimadzu Tensile Testing System With Thermostatic Chamber integrates a 220×220×600 mm thermostatic enclosure with a tensile testing frame, enabling mechanical testing at controlled temperatures. Its water-cooled refrigeration and heater achieve setpoints within 40 minutes, with 1.5 °C uniformity. This modification is for applications requiring precise thermal conditioning during tensile tests, distinguishing it from standard frames without environmental control.
Full specifications
Description
Construction and Positioning
- The system combines a tensile testing frame with a thermostatic chamber of 220 mm width, 220 mm depth, and 600 mm height, accommodating specimens within this envelope. - Thermal control is achieved via a single water-cooled refrigerator for cooling and an electric heater for heating, enabling a temperature range up to 250 °C. - This model is a specialized variant within Shimadzu's tensile testing lineup, differentiated by the integrated chamber; sibling models without chambers are suited for ambient testing only. ### Thermal Behavior
- Heating and cooling each complete within 40 minutes to reach setpoint, supporting efficient test cycling. - Temperature distribution is maintained within 1.5 °C across the chamber, ensuring uniform conditions for specimen testing. - The system does not specify a minimum temperature; the range is stated as up to 250 °C, implying ambient or above operation. ### Installation and Operation
- The chamber requires a water supply for the cooling system; water quality and flow rate must meet Shimadzu specifications to ensure reliable refrigeration. - Electrical connections include power for the heater and refrigerator, with control integrated into the testing system's interface.
Integration & Operating Notes
The single water-cooled refrigerator demands a continuous water supply with adequate flow and temperature to dissipate heat during cooling cycles. Inadequate water quality or flow can reduce cooling efficiency and potentially damage the refrigeration system, so ensure compliance with Shimadzu's water specifications before installation.
The heater and water-cooled refrigerator have substantial electrical demands; verify that the facility's power supply can handle the combined load without voltage drops. Dedicated circuits may be required to prevent interference with other equipment and to ensure stable operation of the thermal chamber.
The water-cooled refrigeration system requires periodic inspection of water quality, filter replacement, and cleaning of heat exchangers to prevent scale buildup and maintain cooling performance. Follow Shimadzu's recommended maintenance schedule, as neglect can lead to reduced cooling efficiency and potential system failure.
Selection & Integration Q&A
Choose this model when tests require controlled temperatures up to 250 °C with 1.5 °C uniformity. Standard frames lack thermal control and are suitable only for ambient testing. This model is ideal for materials whose properties are temperature-dependent.
The water-cooled refrigerator requires a continuous supply of clean water at a specified flow rate and temperature. Consult Shimadzu's installation manual for exact requirements; inadequate water quality or flow can impair cooling and damage the system.
The system should be installed in a location with stable ambient temperature, adequate ventilation, and protection from dust and vibrations. Ensure the water supply and electrical connections meet specifications. Avoid corrosive atmospheres.
The base delivery includes the testing frame and chamber but may not include specimen grips, water filtration, or calibration certificates. Regular maintenance includes water filter replacement and heat exchanger cleaning. Consult Shimadzu for a complete list.