No photo available yet
Shimadzu Tescan Solaris X 2
Shimadzu Tescan Solaris X 2 — Microscopes.
The Tescan Solaris X 2 is a plasma FIB-SEM that uses a xenon plasma ion source (Ga-free) for high-current milling and a Triglav SEM column for simultaneous imaging. It is distinguished within the series by its Xe plasma configuration, enabling Ga-free processing and beam currents up to 3.3 µA for rapid material removal. The instrument is intended for site-specific sample preparation, 3D tomography, and cross-section analysis in materials science and semiconductor failure analysis.
Full specifications
Description
Construction and positioning
- The Solaris X 2 combines a Mistral Xe plasma FIB column with a Triglav SEM column on a single chamber, allowing sequential or simultaneous ion milling and electron imaging. - The Xe plasma source eliminates gallium contamination, making it suitable for samples where Ga implantation is detrimental (e.g., certain metals, semiconductors, or biological specimens). ### Behavior under load and in different modes
- The FIB column supports beam currents up to 3.3 µA, enabling fast bulk milling and large-area cross-sections. At lower currents, fine polishing and site-specific lamella preparation are possible. - The Triglav SEM column provides high-resolution imaging for monitoring milling progress and final inspection. No curve points or detailed beam current ranges are provided, so mode-specific behavior cannot be further quantified.
Selection & Integration Q&A
Choose the Solaris X 2 when gallium contamination or implantation is unacceptable, such as in certain semiconductor or biological samples. Its Xe plasma source also enables higher milling currents (up to 3.3 µA) for faster bulk material removal. For ultra-fine resolution or when Ga is acceptable, a Ga-FIB may be more suitable.