No photo available yet
Shimadzu Tescan Unitom Hr 2
Shimadzu Tescan Unitom Hr 2 — Spectrometers.
The Tescan Unitom HR 2 is a high-resolution X-ray computed tomography system configured as a standalone analytical instrument within the spectrometer category. Its primary purpose is non-destructive 3D inspection and metrology of internal and external structures.
Full specifications
Description
Construction and positioning
- The model is identified as Tescan Unitom HR 2, a high-resolution computed tomography (CT) scanner; the 'HR' designation conventionally denotes a high-resolution configuration within the UniTOM family. ### Behavior under load and in different modes
- No digitized curve points, magnification ranges, or voxel-resolution figures were provided. - Behavior across voltage, current, or filter settings cannot be described without factory data. - The instrument is intended for non-destructive volumetric inspection; specific material or sample-size limits are unverified. ### Installation, connection, and operation
- No PDF digests were attached, so electrical supply, control interface, and installation requirements cannot be cited.
Integration & Operating Notes
No factory specification sheet or manual digest was supplied, so the required voltage, phase, current, and grounding arrangement for the Tescan Unitom HR 2 cannot be stated. The integrating engineer must obtain the site-preparation guide from Tescan before committing facility power.
CT systems are sensitive to vibration and typically require a stable floor and controlled environment, but no verified weight, footprint, or clearance data exists for this model. Site survey must precede installation planning.
No maintenance schedule, X-ray source lifetime figure, or consumable list was provided. The owner should request the planned-maintenance schedule and spare-parts list from Tescan to avoid unplanned downtime.