No photo available yet
Shimadzu Tescan Vega
Shimadzu Tescan Vega — Microscopes.
The Tescan Vega is a tungsten-filament scanning electron microscope configured for SE, BSE, CL, EDS, and gaseous SE detection, with ONCam optical navigation. Its SingleVac and MultiVac vacuum modes support both high-vacuum and variable-pressure imaging, making it suitable for a range of conductive and non-conductive samples. It serves as a versatile imaging and microanalysis platform in laboratory and industrial settings.
Full specifications
Description
Construction and Positioning
The Vega is a tungsten-filament SEM with a column architecture that supports multiple detector types: secondary electron (SE), backscattered electron (BSE), cathodoluminescence (CL), energy-dispersive X-ray spectroscopy (EDS), and gaseous SE detection. It also includes ONCam optical navigation for sample positioning. The vacuum system offers SingleVac and MultiVac modes, allowing operation under different pressure regimes. ### Behavior Under Load and in Different Modes
In SingleVac mode, the chamber operates at a single vacuum level, typically high vacuum for conventional imaging. MultiVac mode enables variable-pressure operation, which is beneficial for imaging non-conductive or outgassing samples without extensive preparation. The detector suite supports complementary contrast mechanisms: SE for surface topography, BSE for compositional contrast, CL for luminescence, and EDS for elemental analysis. Gaseous SE detection is available for low-vacuum conditions, reducing charging artifacts. The system requires a suitable laboratory environment with stable power and vacuum services. Operation involves standard SEM procedures: sample loading, vacuum pumping, detector selection, and imaging parameter adjustment. The ONCam optical navigation aids in locating regions of interest.
Integration & Operating Notes
SEM performance is sensitive to vibration and temperature fluctuations; install on a vibration-isolated floor in a temperature-controlled room to maintain resolution and stability. Ensure adequate clearance for sample exchange and service access.
Connect the system to a dedicated power line with low noise and proper grounding to prevent electrical interference affecting imaging and detector performance. Use surge protection and consider an uninterruptible power supply for critical operations.
SingleVac mode is for high-vacuum imaging of conductive, well-prepared samples. MultiVac mode allows variable-pressure operation for non-conductive or hydrated samples, but may reduce resolution and require gaseous SE detection. Choose mode based on sample compatibility and required image quality.
Tungsten filaments have a limited lifetime and require periodic replacement. Follow the manufacturer's schedule for filament maintenance and column cleaning to ensure stable emission and prevent contamination. Refer to the service manual for procedures.
Selection & Integration Q&A
The Vega supports EDS detection, but integration requires an EDS detector compatible with the chamber and appropriate ports. Ensure the EDS system is calibrated for the SEM's geometry and that vacuum levels are suitable for EDS acquisition. Consult the EDS manufacturer for specific interface requirements.
Operate the Vega in a stable, vibration-free environment with controlled temperature and humidity to maintain performance. Avoid rapid temperature changes. Duty cycle depends on filament life and vacuum pump maintenance; continuous operation is possible with proper care. Refer to the manual for specific limits.
The base delivery typically includes the microscope, standard detectors, and basic software. Consumables like tungsten filaments, aperture strips, and vacuum pump oil are not included and must be ordered separately. Additional detectors (e.g., EDS, CL) and sample holders may also be optional. Regular maintenance kits are recommended.