Waters Aura GT System
Waters Aura GT System — Particle size analyzers.
The Aura GT System is a benchtop particle size analyzer combining a 4x objective with a 24.6 mm² imaging area and 1.0 pixel/µm resolution, covering >1 µm to <5 mm ECD. It is distinguished by a 5 µL minimum volume and dual read modes: 1 min/sample for BMI and 30 s/sample for FMM across two fluorescence channels. It serves as a rapid, low-volume imaging platform for particle characterization in laboratory workflows.
Direct drop-in replacements
Full specifications
| Imaging area mfr | 24.6 mm2 |
| Optics mfr | 4x objective |
| Minimum volume mfr | 5 μL (assay dependent) |
| Resolution mfr | 1.0 pixel/μm |
| Detectable size range mfr | Range from >1 μm (ECD) to <5 mm (ECD) |
| BMI read time mfr | 1 minute/sample |
| FMM read time mfr | 2 FL channels, 30 seconds/sample |
| Software mfr | Particle Vue 4.x all-in-one Software suite (imag |
Description
- Optical path: 4x objective with a 24.6 mm² imaging area and 1.0 pixel/µm resolution. - Detection range spans from >1 µm to <5 mm equivalent circular diameter (ECD). - Minimum sample volume is 5 µL, assay dependent. ### Behavior and modes
- Two read modes are specified: BMI (1 minute per sample) and FMM (2 fluorescence channels, 30 seconds per sample). - No digitized curve points or load-dependent behavior data are available; performance characterization is limited to the stated size range and resolution. - The system is intended for image capture and analysis via the Particle Vue 4.x all-in-one software suite. ### Installation and operation
- No PDF digests, certificates, or applications are provided; installation, connection, and control specifics cannot be detailed beyond the software suite reference.
Integration & Operating Notes
Operating below the assay-dependent minimum volume may prevent reliable image capture and analysis. The 5 µL figure is not universal; the actual required volume depends on the specific assay, so method development must confirm the lower limit for each application before routine use.
Dimensional Drawings & Technical Documentation
Dimensional drawings
Click drawing to inspect vector dimensions