Agilent Streptavidin, Phycobiliprotein and Conjugate Products
Contents
Overviewpp. 1-2
Introduction to Agilent streptavidin and partnering information
Configp. 3
Streptavidin product variants and selection table
Specp. 4
Immobilized streptavidin formats and specifications
Overviewp. 5
Native-source fluorescent proteins from continuous culture
Configp. 6
Phycobiliprotein product options and characteristics
Specp. 7
Activated phycobiliprotein variants and specifications
Specp. 8
Phycobiliprotein conjugate products and properties
Specpp. 9-10
Streptavidin-RPE conjugate specifications and ordering
Specp. 11
Streptavidin-APC conjugate specifications and ordering
Servicesp. 12
Agilent CrossLab support and service information
p. 10table, 20 rows
p. 3table, 5 rows
p. 4table, 10 rows
p. 6table, 16 rows
p. 7table, 6 rows
p. 9table, 3 rows
p. 11table, 5 rows
Streptavidin-RPE conjugates
Product Description
Part Number
Pack Size
Application
Conjugate Size
Streptavidin-R-Phycoerythrin
PJ31S-1
1 mg
PJ31S is a conjugate specifically manufactured for optimum performance in bead-based assays such as the Luminex platform. Superceded by newer conjugates PJRS20 and PJRS301.
Large
PJ31S-5
5 mg
PJ31S
50 mg
Streptavidin-R-Phycoerythrin (ver 2)
PJ39S-1
1 mg
A conjugate that is predominantly a single peak on an HPLC/SEC chromatogram, consistent with approximately two streptavidin molecules conjugated to a single R-phycoerythrin molecule. Potential applications include single molecule detection systems and quantitative analysis in flow cytometry.
Small
PJ39S
50 mg
Streptavidin-R-Phycoerythrin (ver 4)
PJRS20-1
1 mg
PJRS20 is manufactured for optimum performance in bead-based assays.
Large
PJRS20-10
10 mg
PJRS20
50 mg
Streptavidin-R-Phycoerythrin (ver 5)
PJRS25-1
1 mg
PJRS25 is one of several unique Streptavidin-RPE conjugates that has shown to improve performance of some bead-based assays such as the Luminex platform.
Med
PJRS25-10
10 mg
PJRS25
50 mg
Streptavidin-R-Phycoerythrin (ver 6)
PJRS27-1
1 mg
PJRS27 is manufactured for optimum performance in tetramer and multimer applications1 as well as flow cytometry and bead-based assays such as the Luminex platform.
Med
PJRS27-10
10 mg
PJRS27
50 mg
Streptavidin-R-Phycoerythrin (ver 7)
PJRS301-1
1 mg
PJRS301 is our newest streptavidin-RPE conjugate and is specifically manufactured for optimum performance in bead-based assays. PJRS301 manufacture includes additional steps designed to ensure consistent lot performance over time.
Large
PJRS301-10
10 mg
PJRS-301
50 mg
Streptavidin-R-Phycoerythrin (ver 9)
PJRS34-1
1 mg
PJRS34 is manufactured as a low background conjugate for research applications utilizing bead-based assays.
Large
PJRS34-10
10 mg
PJRS34
50 mg
1. NIH Tetramer Core Facility. [Internet]. Atlanta, GA: Emory University; c2006-2010. Class I MHC Tetramer Preparation: Overview; [cited 2020 Oct 21]. Available from: http://tetramer.yerkes.emory.edu/support/protocols
Streptavidin Products
Product Description
Part Number
Pack size*
Tetramer Size
Specific Activity**
Applications
Streptavidin Native from Streptomyces avidinii ('core' streptavidin)
SA10-10
10 mg
~52 kDa
≥ 14.0 U/mg
Conjugation, ELISA
SA10-100
100 mg
SA10
1000 mg
Streptavidin-plus Recombinant gene from Streptomyces avidinii expressed in E. coli
SA26-10
10 mg
~55 kDa
≥ 15.0 U/mg
Conjugation, ELISA, performs well in applications where streptavidin is immobilized
SA26-100
100 mg
* These streptavidin products are available in various pack sizes and are supplied lyophilized. Large quantities are available from single lots, with exceptional lot-to-lot consistency. ** Specific activity is measured by the industry-standard HABA dye-binding assay. The specific activity measurement is higher still when measured by the alternative biotin-titration assay used by some suppliers.
Product Description
Product Description
Part Number
Pack Size
Streptavidin-Agarose
CJ30R-10
10 mL
CJ30R-20
20 mL
CJ30R
100 mL
Streptavidin-HRP conjugate ELISA Optimized for applications that require high signal-to-noise ratios. Made with improved non-mercury stabilizer.
CJ30H-3
3 x 1 mL
CJ30H-10
10 mL
CJ30H-100
100 mL
HRP conjugate stabilizer For dilution (up to 1,000-fold) of HRP conjugates (50% with deionized water). Contains a mercury-free azide-free preservative.
CJ95
500 mL
CJ95-1000
1000 mL
AP conjugate stabilizer For dilution (up to 1,000-fold) of AP conjugates (50% with deionized water). Contains a mercury-free azide-free preservative
CJ90
500 mL
CJ90-1000
1000 mL
Phycobiliprotein options
Product Description
Part Number
Pack Size*
Applications
Absorbance Maximum (nm)
Fluorescence emission (nm)
Molecular Weight (kDa)
R-Phycoerythrin (RPE+) Isolated from a species of red algae chosen specifically because it yields one of the most highly fluorescent of the RPEs.
PB32-10
10 mg
Fluorescent immunolabeling, flow cytometry, Luminex or other bead-based applications.
566 (496 secondary)
575
240
PB32-100
100 mg
PB32
500 mg
Allophycocyanin (Spirulina sp) Isolated from Spirulina sp., a blue-green alga, APC has extremely high absorptivity and a high quantum efficiency. Can be easily linked to antibodies and other proteins.
PB20-10
10 mg
Fluorescent immunolabeling, particularly in applications involving fluorescent-activated cell sorting (FACS) or time-resolved fluorescence resonance transfer (TR-FRET).
648 - 652
~660
104
PB20-100
100 mg
PB20
500 mg
Cross-linked Allophycocyanin Cross-linking APC creates the most stable form available as the crosslinked αβ subunits provide increased structural integrity in the presence of chaotropic salts. There are one or two crosslinks created per APC molecule.
PB25-10
10 mg
Fluorescent immunolabeling, particularly in applications involving FACS or TR-FRET.
64–652
~660
104
PB25-50
50 mg
PB25-100
100 mg
PB25
500 mg
C-Phycocyanin (Spirulina sp) Isolated from Spirulina sp., a blue-green alga. Like other phycobiliproteins, CPC is fluorescent, with an extremely high absorptivity and a high quantum efficiency.
PB11
10 mg
Used in a variety of immunological assays and as fluorescent labels for cell-sorting. Because of the high molar absorbtivity of CPC and other phycobiliproteins at visible wavelength, they are convenient markers in such applications as gel electrophoresis, isoelectric focusing and gel exclusion chromatography.
620
647
232
PB11-500
500 mg
PerCP (Dinophyceae sp) Peridinin-chlorophyll-protein complex (PerCP) is isolated from Dinophyceae sp.
PB40-10
10 mg
Fluorescent immunolabeling, particularly in applications involving FACS.
482
677
35.5
PB40-50
50 mg
PB40-100
100 mg
PB40
500 mg
* These phycobiliprotein products are available in various pack sizes. Large quantities are available from single lots, with exceptional lot-to-lot consistency. Please contact us if you are interested in a sample to test.
Activated Phycobiliproteins / RPE Conjugation Kit
Product Description
Part Number
Pack Size*
Application
Absorbance Maximum (nm)
Fluorescence emission (nm)
Molecular Weight (kDa)
Activated R-Phycoerythrin RPE activated with SMCC then goes through a buffer exchange step and filtered using a 0.45 µm membrane.
PJRC10-5
5 mg
Conjugation of antibodies and other proteins.
566 (496 secondary)
575
240
Activated R-Phycoerythrin RPE activated with SMCC then goes through a buffer exchange step and filtered using a 0.45 µm membrane.
PJRC10
100 mg
Conjugation of antibodies and other proteins.
566 (496 secondary)
575
240
Activated Allophycocyanin APC crosslinked and then activated with SMCC. After a buffer exchange step, the product is filtered using a 0.45 µm membrane.
PJ25C-5
5 mg
Conjugation of APC antibodies and other proteins.
648–652
~660
104
Activated Allophycocyanin APC crosslinked and then activated with SMCC. After a buffer exchange step, the product is filtered using a 0.45 µm membrane.
PJ25C-10
10 mg
Conjugation of APC antibodies and other proteins.
648–652
~660
104
Activated Allophycocyanin APC crosslinked and then activated with SMCC. After a buffer exchange step, the product is filtered using a 0.45 µm membrane.
PJ25C
100 mg
Conjugation of APC antibodies and other proteins.
648–652
~660
104
R-Phycoerythrin Conjugation Kit Contains everything you need to conjugate up to 1 mg of your antibody to RPE, including 3.2 mg activated RPE.
PJ31K
1 kit
Conjugation of RPE to antibodies or other proteins. Reaction may be scaled up by utilizing additional activated RPE (p/n PJRC10).
566 (496 secondary)
575
240
* These phycobiliprotein products are available in various pack sizes. Large quantities are available from single lots, with exceptional lot-to-lot consistency. Please contact us if you are interested in a sample to test.
Streptavidin-RPE conjugate selection guide
Part Number
Conjugate Size
Application
PJRS301*; PJRS20; PJRS34
Large
Luminex and other bead-based assays
PJRS25**; PJRS27
Medium
Tetramer
PJ39S
Small
Flow cytometry
* PJRS301 is our newest conjugate, developed for long-term signal consistency. **PJRS25 is used in the NIH (Emory) Tetramer Core Facility protocol1, along with our streptavidin-APC conjugate PJ27S.
Table
Product Description
Part Number
Pack Size
Application
Streptavidin-Allophycocyanin
PJ25S
0.25 mg
PJ25S is a larger conjugate than PJ27S, and is better suited for FRET assays.
PJ25S-1
1 mg
PJ25S-10
10 mg
Streptavidin-Allophycocyanin (ver 2)
PJ27S
0.25 mg
PJ27S is specifically designed for use in tetramer and multimer applications1.
PJ27S-1
1 mg
1 — сноска в тексте ячейки Application (PJ27S).
Engineering Facts
13 facts · every claim linked to a page
Selection
Choose native SA10 for general conjugation/ELISA work, but recombinant SA26 when streptavidin will be immobilized as an ELISA capture agent.
Immobilization format drives which streptavidin variant to order.
Source
“Streptavidin-plus has been found to have superior performance in certain applications, such as when immobilized as an ELISA capture agent.”
Operation
Lyophilized streptavidin dissolves readily in water or salt buffers up to 50 mg/mL or more, so reconstitution is straightforward.
Defines reconstitution buffer and maximum working concentration.
Source
“Agilent streptavidin is supplied lyophilized and is readily soluble in water or salt-containing buffers, at concentrations of up to 50 mg/mL or more.”
Operation
Streptavidin-Agarose beads are stable across pH 4–11, so buffers outside this range must be avoided.
Sets the allowable pH window for chromatography/affinity purification buffers.
Source
“The linkage is stable through a wide pH range (4–11).”
Selection
Streptavidin-Agarose uses 4.3% cross-linked agarose with 75–300 micron beads and >1 mg/mL streptavidin, informing column packing and capacity planning.
Bead size and ligand density determine flow properties and binding capacity.
Source
“Streptavidin-Agarose is streptavidin attached to beads of cross-linked 4.3% agarose with a bead size distribution of 75–300 microns.”
Operation
The streptavidin-HRP conjugate uses a non-mercury stabilizer, avoiding mercury-based preservative handling.
Affects storage/handling and compatibility with sensitive assays.
Source
“The conjugate is made with an improved non-mercury stabilizer ensuring long-term stability.”
Operation
HRP and AP conjugate stabilizers are diluted up to 1,000-fold, 50% with deionized water, and are mercury- and azide-free.
Defines dilution protocol and preservative compatibility for conjugate storage.
Source
“For dilution (up to 1,000-fold) of HRP conjugates (50% with deionized water). Contains a mercury-free azide-free preservative.”
Selection
Cross-linked APC should be selected when chaotropic salts are present, since crosslinking provides structural integrity.
Buffer composition (chaotropes) dictates whether standard or cross-linked APC is required.
Source
“Cross-linking APC creates the most stable form available as the crosslinked αβ subunits provide increased structural integrity in the presence of chaotropic salts.”
Operation
Activated phycobiliproteins are SMCC-treated and react with free sulfhydryl groups, so targets must carry free thiols and need no added crosslinker.
Determines target protein preparation (free sulfhydryls) and eliminates crosslinker addition step.
Source
“They are ready to use and will conjugate without further preparation upon mixing with sulfhydryl-containing targets.”
Operation
The RPE conjugation kit conjugates up to 1 mg antibody, scales down to 50 µg, and conjugates can be ready in as little as two hours.
Sets scale range and time budget for in-house conjugation.
Source
“Complete step-by-step protocols are included and allow small scale conjugations down to 50 µg of antibody.”
Selection
Conjugate size must match the assay: large SA-RPE for bead-based assays, medium for tetramer, small for flow cytometry.
Prevents choosing a conjugate optimized for the wrong assay platform.
Source
“the optimal conjugates for bead-based assays are not usually the same as the optimal conjugates for MHC tetramer assays”
Selection
PJ39S is predominantly a single HPLC/SEC peak with about two streptavidin per RPE, suited to single-molecule and quantitative flow cytometry.
Homogeneity matters for quantitative and single-molecule detection systems.
Source
“A conjugate that is predominantly a single peak on an HPLC/SEC chromatogram, consistent with approximately two streptavidin molecules conjugated to a single R-phycoerythrin molecule.”
Selection
PJ25S is a larger SA-APC conjugate better suited for FRET, while PJ27S is designed for tetramer/multimer work.
FRET versus tetramer applications require different APC conjugate sizes.
Source
“PJ25S is a larger conjugate than PJ27S, and is better suited for FRET assays.”
Operation
APC is normally used internally cross-linked because it is stable at the low concentrations required for most uses.
Low-concentration working conditions require the cross-linked APC form.
Source
“APC is usually used in an internally crosslinked form which is stable at the low concentrations required for most uses.”