Induztr
Engineering Digest Document Viewer Related Models

HiPace 400 P with TC 400 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum HiPace 400 P turbomolecular vacuum pump — a single model datasheet (3 pages). Covers the standard pump plus listed accessories/options: electrical adapter, mains/connecting cables, fieldbus systems (Profibus, Profinet, Ethercat, Devicenet, SEMI E74), power supply kit and display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper.

Section-by-Section Technical Breakdown

pp. 1
Product Overview

Positions the HiPace 400 P as a high-performance turbomolecular pump specially designed for coating processes with an optimized rotor/stator concept. Highlights hybrid bearing technology for long life and maximum uptime, and on-site bearing change capability with insensitivity to process dust.

  • Designed for coating processes with optimized rotor/stator concept
  • Best-in-class hybrid bearing technology, long life cycle, maximum uptime
  • On-site bearing change possible; insensitive to process dust
  • Accessories/options: electrical adapter, mains cable, connecting cable, fieldbus systems, power supply kit and display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper
pp. 2
Performance Data

Pumping speeds, compression ratios and gas throughputs for N₂, H₂, He and Ar at final rotational speed, plus forevacuum limit, run-up time and communication interfaces. Core sizing data for pump selection.

  • Pumping speed: N₂ 350 l/s, H₂ 225 l/s, He 420 l/s, Ar 320 l/s
  • Compression ratio: N₂ 1·10⁶, H₂ 4·10², He 3·10³, Ar 1·10⁷
  • Gas throughput at final rotational speed: N₂ 2 hPa·l/s, H₂ 4 hPa·l/s, He 4 hPa·l/s, Ar 1 hPa·l/s
  • Max. forevacuum pressure for N₂: 0.9 hPa
  • Run-up time: 1.6 min
  • Standard interfaces: RS-485, remote; optional: Profibus, Profinet, Ethercat, Devicenet, SEMI E74
pp. 3
Mechanical and Installation Data

Mechanical envelope data: mounting orientation, noise level, weight, and inlet/outlet flange connections. Relevant for system layout and integration.

  • Mounting orientation: arbitrary
  • Sound pressure level (EN ISO 2151): 50 dBA
  • Weight: approx. 10.9 kg
  • Gas inlet: DN 100 ISO-K/ISO-F/CF-F; outlet: DN 25 ISO-KF / G 1/4"

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed is 350 l/s for N₂ and 420 l/s for He (He speed higher than N₂). p.2 ↗ Size backing pumps and conductance calculations using gas-specific speeds; do not assume a single N₂-equivalent value for light gases. HiPace 400 P
Compression ratio for H₂ is only 4·10², versus 1·10⁶ for N₂ and 1·10⁷ for Ar. p.2 ↗ Ultimate pressure in hydrogen-bearing processes is strongly limited by foreline pressure; use a clean, low-pressure backing pump for low H₂ partial pressure. HiPace 400 P
Maximum permissible forevacuum pressure is 0.9 hPa (for N₂). p.2 ↗ Backing pump and roughing sequencing must keep foreline pressure below 0.9 hPa during operation to avoid rotor overload. HiPace 400 P
Gas throughput at final rotational speed is 2 hPa·l/s (N₂), 4 hPa·l/s (H₂, He), 1 hPa·l/s (Ar). p.2 ↗ Defines maximum continuous process gas load; throttle gas inlet or upsize pumping train for higher throughputs. HiPace 400 P
Run-up time to final speed is 1.6 min. p.2 ↗ Short start-up enables fast cycle restarts in coating processes; gate valve interlocks should account for this delay. HiPace 400 P
Standard communication interfaces are RS-485 and remote; optional fieldbuses are Profibus, Profinet, Ethercat, Devicenet and SEMI E74. p.2 ↗ Select the matching optional interface module for PLC/fab integration; SEMI E74 variant suits semiconductor-tool recipes. HiPace 400 P
Pump allows arbitrary mounting orientation. p.3 ↗ No vertical-mount restriction simplifies integration into compact coating chambers or horizontal installations. HiPace 400 P
Gas inlet is DN 100 ISO-K/ISO-F/CF-F; outlet is DN 25 ISO-KF / G 1/4". p.3 ↗ Choose ISO-K, ISO-F or CF-F mating flanges per vacuum requirement (CF-F for high-vacuum/bakeout systems); foreline plumbing must fit DN 25 ISO-KF or G 1/4". HiPace 400 P
Weight is approx. 10.9 kg. p.3 ↗ Light enough for single-person handling and for mounting on chamber flanges without additional structural support; verify flange load limits. HiPace 400 P
Sound pressure level is 50 dBA per EN ISO 2151. p.3 ↗ Low noise allows installation in operator-accessible areas without acoustic enclosures. HiPace 400 P
Hybrid bearing design supports on-site bearing change and is insensitive to process dust. p.1 ↗ Maintenance can be performed in place without pump removal; suitable for dust-generating coating processes, but plan bearing-interval spares stock. HiPace 400 P
Optional power failure venting unit and venting accessories are available. p.1 ↗ Specify the venting unit to protect the rotor from debris/backstreaming during unplanned shutdowns in coating systems. HiPace 400 P (option)