Induztr
Engineering Digest Document Viewer Related Models

HiPace 300 H with TC 110 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

This document is a 3-page Pfeiffer Vacuum datasheet/brochure for the HiPace 300 H turbomolecular vacuum pump (single model, no variant/ordering matrix given). It lists the pump's performance data, interface/flange specifications, and available accessories and options (adapter, mains/connecting cables, fieldbus systems, power supply kit and display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper).

Section-by-Section Technical Breakdown

pp. 1
Features, Accessories and Options

The HiPace 300 H is positioned as a high-performance turbomolecular pump for high and ultra-high vacuum, with strong light-gas compression, hybrid bearing technology for long life, and low noise/vibration via patented laser balancing. Accessories and options include electrical adapters, mains and connecting cables, fieldbus systems, power supply kit with display unit, mounting kit, safety valve, venting accessories, power failure venting unit, and vibration damper.

  • Best compression ratio for light gases, suited for high and ultra-high vacuum applications
  • Best-in-class hybrid bearing technology, long life cycle, maximum uptime
  • Low noise and vibration via patented laser balancing technology
  • Options: electrical adapter, mains cable, connecting cable, various fieldbus systems
  • Options: power supply kit and display unit, mounting kit, safety valve
  • Options: venting accessories, power failure venting unit, vibration damper
pp. 2-3
Technical Data

This section gives pumping speeds, compression ratios and gas throughputs for N₂, H₂, He and Ar, plus operational limits and mechanical data. It also provides run-up time, sound pressure level, weight, standard communication interfaces and flange connections.

  • Pumping speed: N₂ 260 l/s, H₂ 220 l/s, He 255 l/s, Ar 255 l/s
  • Compression ratio: N₂ 1·10¹³, H₂ 1·10⁷, He 2.5·10⁹, Ar 1·10¹³
  • Gas throughput at final rotational speed: N₂ 1.5 hPa·l/s, H₂ 10 hPa·l/s, He 3.5 hPa·l/s, Ar 0.5 hPa·l/s
  • Forevacuum max. for N₂: 30 hPa; run-up time 3.5 min
  • Sound pressure level (EN ISO 2151): 50 dBA; weight approx. 6.2 kg
  • Communication interfaces standard: RS-485, remote
  • Mounting orientation: arbitrary
  • Gas inlet / outlet: DN 100 ISO-K/ISO-F/CF-F / DN 16 ISO-KF / G 1/4"

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed is 260 l/s for N₂, 220 l/s for H₂, and 255 l/s for He and Ar. p.2 ↗ Size the backing pump and process gas budgeting for near-equal speed across He/Ar/N₂, with reduced H₂ speed of ~85% of N₂. HiPace 300 H
Compression ratio is 1·10¹³ for N₂ and Ar, 2.5·10⁹ for He, and 1·10⁷ for H₂. p.2 ↗ The pump is well suited to UHV with hydrocarbon-free high vacuum; H₂ compression is the limiting gas, so clean fore vacuum matters for hydrogen-containing processes. HiPace 300 H
Maximum permissible forevacuum pressure is 30 hPa (specified for N₂). p.2 ↗ Select/adjust the backing pump so fore-line pressure never exceeds 30 hPa under full gas load to protect the turbo stage. HiPace 300 H
Gas throughput at final rotational speed: N₂ 1.5 hPa·l/s, H₂ 10 hPa·l/s, He 3.5 hPa·l/s, Ar 0.5 hPa·l/s. p.2 ↗ The pump tolerates up to 10 hPa·l/s of hydrogen throughput, indicating use for hydrogen-rich processes; Ar throughput is lowest (0.5 hPa·l/s) and limits sputtering-type gas loads. HiPace 300 H
Run-up time to final speed is 3.5 minutes. p.2 ↗ Allow ~3.5 min before opening the high-vacuum valve in sequencing; account for this in cycle-time planning. HiPace 300 H
Sound pressure level is 50 dBA per EN ISO 2151. p.2 ↗ Suitable for laboratory environments without dedicated acoustic enclosure; still consider damping for sensitive metrology setups. HiPace 300 H
Weight is approximately 6.2 kg. p.2 ↗ Light enough for single-person mounting; verify flange/hose loads accordingly, use the optional vibration damper where applicable. HiPace 300 H
Standard communication interfaces are RS-485 and remote. p.3 ↗ Integration into PLC/PC control is possible without additional interface card; fieldbus options are available as accessories. HiPace 300 H
Mounting orientation is arbitrary. p.3 ↗ The pump can be installed in any orientation, simplifying integration into chambers or skids without dedicated orientation constraints. HiPace 300 H
Gas inlet is DN 100 ISO-K/ISO-F/CF-F; outlet is DN 16 ISO-KF / G 1/4". p.3 ↗ Order matching DN 100 flange hardware for the inlet; DN 16 ISO-KF or G 1/4" fittings for the fore-vacuum line. HiPace 300 H
A power failure venting unit is available as an option. p.1 ↗ For safety-critical processes, specify this venting accessory so the chamber safely vents during power loss. HiPace 300 H (option)
The pump uses hybrid bearing technology with patented laser balancing for low vibration. p.1 ↗ Combined with the optional vibration damper, the pump is suitable for vibration-sensitive applications such as microscopy or surface analysis. HiPace 300 H