Induztr
Engineering Digest Document Viewer Related Models

HiPace 700 P with TC 400 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum HiPace 700 P turbomolecular vacuum pump — a single high-performance model designed for coating processes with an optimized rotor/stator concept. The document also lists accessories, spare parts and options (electrical adapter, mains cable, connecting cable, various fieldbus systems, power supply kit and display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper).

Section-by-Section Technical Breakdown

pp. 1
Product Highlights

The HiPace 700 P is positioned as a high-performance turbomolecular pump specially designed for coating processes with an optimized rotor/stator concept. It emphasizes reliability via best-in-class hybrid bearing technology for long life cycle and maximum uptime. Maintenance is simplified through on-site bearing change and insensitivity to process dust.

  • Specially designed for coating processes, optimized rotor/stator concept
  • Best-in-class hybrid bearing technology, long life cycle, maximum uptime
  • On-site bearing change possible; insensitive to process dust
pp. 1
Accessories, Spare Parts and Options

The document lists available accessories, spare parts and options for the HiPace 700 P, covering electrical connectivity, communication, mounting, venting and vibration isolation. No ordering codes are given, only the categories of available items.

  • Electrical adapter, mains cable, connecting cable
  • Various fieldbus systems
  • Power supply kit and display unit
  • Mounting kit
  • Safety valve
  • Venting accessories, power failure venting unit
  • Vibration damper
pp. 2-3
Technical Data

Technical specifications include pumping speeds for N₂, H₂, He and Ar, compression ratios, gas throughput at final rotational speed, and mechanical/electrical characteristics. Standard communication interfaces are RS-485 and remote; mounting orientation is arbitrary. Gas inlet is DN 160 ISO-K/ISO-F/CF-F and outlet is DN 25 ISO-KF / G 1/4".

  • Pumping speed: N₂ 670 l/s, H₂ 275 l/s, He 550 l/s, Ar 650 l/s
  • Compression ratio: N₂ 1·10⁶, H₂ 4·10², He 3·10³, Ar 1·10⁷
  • Gas throughput at final rotational speed: N₂ 2 hPa·l/s, H₂ 6 hPa·l/s, He 4 hPa·l/s, Ar 1 hPa·l/s
  • Forevacuum max. for N₂: 1.1 hPa
  • Run-up time: 1.6 min
  • Sound pressure level (EN ISO 2151): 50 dBA
  • Weight approx.: 10.8 kg
  • Interfaces: RS-485, remote (standard)
  • Mounting orientation: arbitrary
  • Gas inlet: DN 160 ISO-K/ISO-F/CF-F; gas outlet: DN 25 ISO-KF / G 1/4"

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed for N₂ is 670 l/s p.2 ↗ Size forevacuum and conductance piping based on the high N₂ throughput; suitable for large coating chambers requiring ~670 l/s HiPace 700 P
Pumping speed for H₂ is only 275 l/s vs 670 l/s for N₂ p.2 ↗ For hydrogen-heavy processes, expect strongly reduced effective pumping; consider gas-type dependency in pump-down calculations HiPace 700 P
Compression ratio for H₂ is 4·10², while N₂ is 1·10⁶ and Ar is 1·10⁷ p.2 ↗ Light gases (H₂) limit achievable ultimate pressure; forevacuum quality directly affects base pressure in hydrogen-containing systems HiPace 700 P
Maximum forevacuum pressure for N₂ is 1.1 hPa p.2 ↗ Select a backing pump that maintains foreline pressure below 1.1 hPa at full gas throughput to keep the turbo at operational conditions HiPace 700 P
Run-up time to final rotational speed is 1.6 min p.2 ↗ System interlocks and process start logic must wait ≥1.6 min after power-on before assuming full pumping speed HiPace 700 P
Gas throughput at final rotational speed: N₂ 2 hPa·l/s, H₂ 6 hPa·l/s, He 4 hPa·l/s, Ar 1 hPa·l/s p.2 ↗ Limits the permissible process gas load; size backing pump for these throughputs, noting H₂ can be loaded highest (6 hPa·l/s) HiPace 700 P
Sound pressure level is 50 dBA (measured per EN ISO 2151) p.2 ↗ Relatively quiet operation; typically no special acoustic enclosure required for workplace noise compliance HiPace 700 P
Weight is approx. 10.8 kg p.2 ↗ Relatively light for a 670 l/s pump; simplifies mounting and handling, but mounting flange load must still account for connected hardware HiPace 700 P
Gas inlet is DN 160 ISO-K/ISO-F/CF-F; outlet is DN 25 ISO-KF / G 1/4" p.3 ↗ Choose ISO-K, ISO-F or CF-F inlet flanges per vacuum chamber interface; foreline must match DN 25 ISO-KF or G 1/4" connection HiPace 700 P
Mounting orientation is arbitrary p.3 ↗ The pump can be installed in any orientation, enabling flexible integration into coating systems without orientation constraints HiPace 700 P
Standard communication interfaces are RS-485 and remote p.3 ↗ Plan control integration around RS-485/remote; fieldbus options are available as accessories if a different protocol is required HiPace 700 P
Hybrid bearing technology with on-site bearing change capability p.1 ↗ Bearing replacement can be performed in situ without pump removal, reducing downtime in production coating environments HiPace 700 P
The pump is insensitive to process dust p.1 ↗ Suitable for dusty coating (PVD/sputtering) processes without upstream dust protection in many cases HiPace 700 P
A power failure venting unit is available as an accessory p.1 ↗ For unattended operation, include this option to vent safely on power loss and prevent process contamination/backstreaming HiPace 700 P (optional accessory)