Induztr
Engineering Digest Document Viewer Related Models

HiPace 300 with TC 110 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

This 3-page datasheet covers the Pfeiffer Vacuum HiPace 300 turbomolecular vacuum pump (single model, with optional accessories: electrical adapter, mains/connecting cables, fieldbus systems, power supply kit with display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper).

Section-by-Section Technical Breakdown

pp. 1
Product Highlights

Key selling/technical points of the HiPace 300: high performance via optimized rotor geometry with enhanced gas load handling, reliability via hybrid bearing technology and superior bearing lubrication, and quiet operation thanks to patented laser balancing suitable for vibration-sensitive applications.

  • High performance: optimized rotor geometry, enhanced gas load handling
  • Reliable: best-in-class hybrid bearing technology, superior bearing lubrication for long life cycle
  • Quiet: low noise and vibration via patented laser balancing technology
  • Suited for vibration-sensitive applications
pp. 2
Technical Data

Performance figures for the HiPace 300: pumping speeds for N2, H2, He and Ar; compression ratios; gas throughput at final rotational speed; plus mechanical and acoustic characteristics such as run-up time, sound pressure level, and weight.

  • Pumping speed: N2 260 l/s, H2 220 l/s, He 255 l/s, Ar 255 l/s
  • Compression ratio: N2 1·10¹¹, H2 9·10⁵, He 1·10⁸, Ar 1·10¹¹
  • Gas throughput at final rotational speed: N2 14 hPa·l/s, H2 14 hPa·l/s, He 20 hPa·l/s, Ar 7 hPa·l/s
  • Max. forevacuum pressure (N2): 20 hPa
  • Run-up time: 1.8 min
  • Sound pressure level (EN ISO 2151): 50 dBA
  • Weight approx.: 6.7 kg
pp. 3
Interfaces and Mounting

Communication interfaces standard: RS-485 and remote. Mounting orientation is arbitrary. Flange configuration: DN 100 ISO-K/ISO-F/CF-F inlet and DN 16 ISO-KF or G 1/4" outlet.

  • Communication interfaces (standard): RS-485, remote
  • Mounting orientation: arbitrary
  • Gas inlet: DN 100 ISO-K / ISO-F / CF-F
  • Gas outlet: DN 16 ISO-KF / G 1/4"
pp. 1
Accessories, Spare Parts and Options

The document lists available accessories and options for the HiPace 300, covering electrical, installation, venting and vibration-related items.

  • Electrical adapter, mains cable, connecting cable
  • Various fieldbus systems
  • Power supply kit and display unit
  • Mounting kit, safety valve
  • Venting accessories, power failure venting unit
  • Vibration damper

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed for N2 is 260 l/s p.2 ↗ Size downstream processes around ~260 l/s effective N2 pumping capacity; verify against system conductance losses. HiPace 300
Pumping speed for H2 is 220 l/s (He 255 l/s, Ar 255 l/s) p.2 ↗ Light-gas performance remains high; suitable for hydrogen-containing processes but note the comparatively low H2 compression ratio. HiPace 300
Compression ratio for N2 and Ar is 1·10¹¹; for He 1·10⁸; for H2 only 9·10⁵ p.2 ↗ Ultimate pressure for hydrogen applications is strongly dependent on forevacuum quality; use a good fore pump to reach low H2 partial pressures. HiPace 300
Gas throughput at final rotational speed: 14 hPa·l/s (N2, H2), 20 hPa·l/s (He), 7 hPa·l/s (Ar) p.2 ↗ Defines the maximum continuous gas load the pump can handle; do not exceed these throughputs in process applications. HiPace 300
Maximum forevacuum pressure for N2 is 20 hPa p.2 ↗ Select/adjust the backing pump so foreline pressure stays below 20 hPa at maximum gas throughput to avoid loss of pumping action. HiPace 300
Run-up time is 1.8 min p.2 ↗ Plan process start sequences accordingly; full pumping performance available ~2 minutes after start. HiPace 300
Sound pressure level is 50 dBA (EN ISO 2151) p.2 ↗ Low noise level; suitable for lab and operator-adjacent installations without special acoustic enclosures. HiPace 300
Weight is approx. 6.7 kg p.2 ↗ Light enough for single-person handling and light-duty mounting structures; confirm flange/load support accordingly. HiPace 300
Mounting orientation is arbitrary p.3 ↗ Pump can be installed in any orientation, simplifying integration into compact or unusual chamber layouts. HiPace 300
Gas inlet flange is DN 100 ISO-K/ISO-F/CF-F; outlet is DN 16 ISO-KF or G 1/4" p.3 ↗ Design chamber interface for DN 100 flanges and select matching ISO-KF DN 16 or G 1/4" foreline hardware. HiPace 300
Standard communication interfaces are RS-485 and remote p.3 ↗ Integrate via RS-485 (e.g., Pfeiffer protocol) or hardwired remote I/O; fieldbus variants available as options. HiPace 300
Hybrid bearing technology with superior bearing lubrication is used p.1 ↗ Expect long bearing life cycle; suitable for applications where lubricant-related contamination must be minimized. HiPace 300
Patented laser balancing technology yields low noise and vibration p.1 ↗ Suitable for vibration-sensitive applications (e.g., electron microscopy, surface analysis); optionally add the vibration damper accessory. HiPace 300
A power failure venting unit and venting accessories are available as options p.1 ↗ Specify power-failure venting for unattended systems to protect the pump and chamber on sudden shutdowns. HiPace 300
A safety valve and mounting kit are offered as accessories p.1 ↗ Use the safety valve where oil backstreaming/inlet sealing on shutdown is required; mounting kit for standardized installation. HiPace 300