Available injector and outer tube-set configurations
Procedurep. 3
Steps before first use of fully demountable torch
Procedurep. 4
How to disassemble the fully demountable torch
Procedurep. 5
How to reassemble the fully demountable torch
Procedurep. 6
How to disassemble the ceramic outer tube-set
Orderingp. 7
Spare parts and ordering information
Configp. 10
Available injector and outer tube-set configurations
Procedurep. 11
Steps before first use of fully demountable torch
Procedurep. 12
How to disassemble the fully demountable torch
Procedurep. 13
How to reassemble the fully demountable torch
Procedurep. 14
How to disassemble the ceramic outer tube-set
Orderingp. 15
Spare parts and ordering information
Configp. 18
Available injector and outer tube-set configurations
Procedurep. 19
Steps before first use of fully demountable torch
Procedurep. 20
How to disassemble the fully demountable torch
Procedurep. 21
How to reassemble the fully demountable torch
Procedurep. 22
How to disassemble the ceramic outer tube-set
Orderingp. 23
Spare parts and ordering information
Configp. 26
Available injector and outer tube-set configurations
Procedurep. 27
Steps before first use of fully demountable torch
Procedurep. 28
How to disassemble the fully demountable torch
Procedurep. 29
How to reassemble the fully demountable torch
Overviewp. 30
Overview of the ceramic outer tube-set
Procedurep. 31
Maintenance and cleaning instructions
p. 32
References to instructional videos
Configp. 34
Available injector and outer tube-set configurations
Procedurep. 35
Steps before first use of fully demountable torch
Procedurep. 36
How to disassemble the fully demountable torch
Procedurep. 37
How to reassemble the fully demountable torch
Overviewp. 38
Overview of the ceramic outer tube-set
Procedurep. 39
How to reassemble the ceramic outer tube-set
Orderingp. 40
Spare parts and ordering information
Configp. 43
Available injector and outer tube-set configurations
Procedurep. 44
Steps before first use of fully demountable torch
Procedurep. 45
How to disassemble the fully demountable torch
Procedurep. 46
How to reassemble the fully demountable torch
Procedurep. 47
How to disassemble the ceramic outer tube-set
Orderingp. 48
Spare parts and ordering information
Configp. 51
Available injector and outer tube-set configurations
Procedurep. 52
Steps before first use of fully demountable torch
Procedurep. 53
How to disassemble the fully demountable torch
Procedurep. 54
How to reassemble the fully demountable torch
Procedurep. 55
How to disassemble the ceramic outer tube-set
Orderingp. 56
Spare parts and ordering information
Configp. 59
Available injector and outer tube-set configurations
Procedurep. 60
Steps before first use of fully demountable torch
Procedurep. 61
How to disassemble the fully demountable torch
Procedurep. 62
How to reassemble the fully demountable torch
Procedurep. 63
How to disassemble the ceramic outer tube-set
Orderingp. 64
Spare parts and ordering information
p. 7table, 8 rows
p. 2table, 3 rows
Replacement Injectors for fully demountable torch used with 5100/5110 and 5800/5900 ICP-OES
Description
Part number
0.8mm id quartz injector, recommended for volatile organic solvents
G8020-60805
1.4mm id quartz injector, recommended for semi-volatile organic solvents and acidic solutions with RV torch type
G8020-60806
1.8mm id quartz injector, recommended for acidic solutions with DV torch type
G8020-60807
2.4mm id quartz injector, recommended for high TDS samples
G8020-60808
0.8mm id alumina injector (inert), recommended for volatile organic solvents
G8020-47002
1.4mm id alumina injector (inert), recommended for alkali metal rich samples (including Li Battery materials) and semi-volatile organic solvents
G8020-47003
1.8mm id alumina injector (inert), recommended for HF digests
G8020-47005
2.4mm id alumina injector (inert), recommended for HF digests and high total dissolved solids (TDS) samples (up to 35% TDS)
G8020-47004
Table 1 Tube-set and injector options for different applications
Application
Suggested outer tube-set material
Suggested injector internal diameter (id)
Key benefits / characteristics
Most aqueous or acidic samples
Standard quartz
1.8mm id
Suitable for general purpose analysis Most economical option
Volatile and semi-volatile organic samples
'Organic' high purity quartz
0.8mm id (for volatile) & 1.4mm id (for semi-volatile)
'Organic' tube-set and inert alumina injectors offer improved resistance to solarization (web-cracking caused by deep UV exposure)
High-TDS matrices rich in alkali metals (including Li battery materials), hydrofluoric (HF) acid digests or fusions
Ceramic outer
2.4mm id inert (alumina)
Longest service life, superior resistance to devitrification Easy to clean
Engineering Facts
11 facts · every claim linked to a page
Installation
The fully demountable torch ships without the injector installed, so the injector must be installed before the torch is fitted to the instrument.
Prevents a failed first installation and ensures the injector is seated correctly before use.
Source
“The torch is shipped without the injector installed.”
Installation
The injector must be pushed fully in until the bulge contacts the retaining clamp and clicks into position.
Confirms correct injector seating and avoids gas leaks or misalignment.
Source
“Fully insert the injector into the torch body until the bulge contacts the retaining clamp and “clicks” into position.”
Installation
The locking nut must be hand-tightened only; overtightening can damage the injector and torch body.
Prevents costly damage to the injector and torch body during assembly.
Source
“Do not overtighten the locking nut. Overtightening can damage the injector and torch body.”
Installation
When reassembling the fully demountable torch, the groove on the torch body must align with the T mark on the outer tube-set.
Ensures correct orientation of the outer tube-set and proper gas flow.
Source
“position it so that the groove on the torch body aligns with the “T” alignment mark on the tube-set”
Maintenance
The polymer adapter on the quartz intermediate tube is fixed and must not be removed.
Removing it would damage the ceramic tube-set and require replacement.
Source
“The quartz intermediate tube has a polymer adapter that is fixed and should not be removed.”
Selection
A 0.8 mm id quartz injector is recommended for volatile organic solvents.
Selecting the correct injector diameter is critical for organic sample analysis.
Source
“0.8mm id quartz injector, recommended for volatile organic solvents”
Selection
A 2.4 mm id alumina injector is recommended for HF digests and high TDS samples up to 35% TDS.
Ensures compatibility with HF and high-matrix samples without injector damage.
Source
“2.4mm id alumina injector (inert), recommended for HF digests and high total dissolved solids (TDS) samples (up to 35% TDS)”
Selection
The ceramic outer tube-set in DV configuration is intended for high TDS, HF digests, or lithium-ion battery materials.
Guides material selection for demanding matrices to maximize tube life.
Source
“Ceramic outer tube-set, DV configuration, for use with high TDS, HF digests or Lithium-ion battery materials”
Safety
Always maintain a straight parallel movement when inserting or removing the torch and quartz/ceramic components to avoid breakage.
Prevents glass breakage and hand injury during handling.
Source
“Always maintain a straight parallel movement when inserting or removing the torch and quartz/ceramic torch components to avoid breaking them.”
Operation
The torch and torch compartment remain extremely hot after plasma shutdown; wait at least five minutes before removing the torch.
Prevents burns and thermal damage to components during maintenance.
Source
“Attendere per almeno cinque minuti il raffreddamento della torcia e del vano torcia prima di tentare di rimuovere la torcia.”
Maintenance
Corrosive acids or chemical residues may be present on torch components and can cause severe burns; wear protective clothing and rinse with water if contact occurs.
Ensures operator safety during cleaning and handling of used torch parts.
Source
“Indossare sempre indumenti protettivi adeguati quando si maneggiano i componenti della torcia e i prodotti chimici per la pulizia.”