The instrument requires two people to lift and place it on the bench, so plan manpower for unpacking.
Determines site preparation and staffing for safe placement of the instrument.
Source
“2 people lift and set on bench.”
The instrument requires two people to lift and place it on the bench, so plan manpower for unpacking.
Determines site preparation and staffing for safe placement of the instrument.
“2 people lift and set on bench.”
Safety information is not in this quick guide; the user must consult the Cary 60 User's Guide before installation.
Ensures the installer reviews required safety precautions before powering the system.
“See the Cary 60 User’s Guide for safety information.”
The power cable must be connected before the USB cable during hardware installation.
Defines the correct power-up sequence to avoid communication or detection issues.
“Plug in the power.”
The USB connection is made after power is applied, as the second hardware step.
Confirms the interface order so the PC can enumerate the instrument correctly.
“Plug in the USB.”
If the installer does not see the installation screen, the setup executable on the disc must be run manually.
Provides the fallback procedure when autorun fails on the PC.
“Run ‘AgilentCaryWinUVSetup’ located on the installation disc.”
During software installation the 'Always trust software from Agilent Technologies, Incorporated' checkbox must be selected.
Prevents driver-signing prompts from blocking instrument communication.
“Ensure the ‘Always trust software from ‘Agilent Technologies, Incorporated’ box is checked.”
After switching on, the operator must wait two minutes for calibration to complete before use.
Defines the warm-up/calibration wait time required before measurements.
“Wait 2 minutes for calibration to complete.”
The validation test takes seven minutes and must be allowed to finish after clicking Start.
Sets the expected duration for the instrument performance validation step.
“Wait 7 minutes for test to complete.”
Validation produces an automated report that should be printed and the Validate application closed afterward.
Documents the required record-keeping for installation qualification.
“Automated report generated. Print report. Close Validate.”
Registration requires the product key located on the CD case.
Ensures the license key is retained and available during software registration.
“Product Key on CD case.”
The serial number is needed to complete hardware registration in the software.
Reminds the installer to record the instrument serial number before registration.
“Serial number”