Induztr
Engineering Digest Document Viewer Related Models

HiPace 400 with TC 400 24 V — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum HiPace 400 turbomolecular vacuum pump datasheet/brochure (3 pages). Covers the single HiPace 400 model with flange variants DN 100 ISO-K/ISO-F/CF-F inlet; lists available accessories and options (adapter cables, fieldbus systems, power supply kit/display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper). No ordering codes/matrix given.

Section-by-Section Technical Breakdown

pp. 1
Product Highlights

The HiPace 400 is positioned as a high-throughput turbomolecular pump with high pumping speed and high compression for light gases. It uses optimized rotor geometry for enhanced gas load handling and a hybrid bearing technology with superior lubrication for long life.

  • High gas throughput
  • High pumping speed; compatible with a variety of backing pumps; high compression for light gases
  • Optimized rotor geometry, enhanced gas load handling
  • Best-in-class hybrid bearing technology with superior bearing lubrication for long life cycle
pp. 1
Accessories, Spare Parts and Options

The document lists the accessory and option range for the HiPace 400, covering electrical connectivity, communication, mounting, venting and vibration isolation. No part numbers are given.

  • Electrical adapter, mains cable, connecting cable
  • Various fieldbus systems
  • Power supply kit and display unit
  • Mounting kit
  • Safety valve
  • Venting accessories; power failure venting unit
  • Vibration damper
pp. 2-3
Technical Data

Key performance data for the HiPace 400: pumping speeds of 355 l/s (N₂) to 470 l/s (He), compression ratios up to 1·10¹¹, and gas throughputs up to 20 hPa·l/s. Mechanical/interface data include arbitrary mounting orientation, DN 100 inlet, 11.6 kg weight and 4 min run-up time.

  • Pumping speed: N₂ 355 l/s, H₂ 445 l/s, He 470 l/s, Ar 320 l/s
  • Compression ratio: N₂ 1·10¹¹, H₂ 4·10⁵, He 3·10⁷, Ar 1·10¹¹
  • Gas throughput at final rotational speed: N₂ 6.5, H₂ 14, He 20, Ar 3.5 hPa·l/s
  • Max. forevacuum pressure for N₂: 11 hPa
  • Run-up time: 4 min
  • Sound pressure level (EN ISO 2151): 50 dBA
  • Weight: approx. 11.6 kg
  • Communication interfaces standard: RS-485, remote
  • Mounting orientation: arbitrary
  • Gas inlet/outlet: DN 100 ISO-K/ISO-F/CF-F / DN 25 ISO-KF / G 1/4"

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed for N₂ is 355 l/s (H₂ 445 l/s, He 470 l/s, Ar 320 l/s). p.2 ↗ Size backing pumps and conductance calculations around 355 l/s for typical N₂-dominated processes; He exceeds N₂ speed, Ar is lower. HiPace 400
Compression ratio for H₂ is only 4·10⁵ versus 1·10¹¹ for N₂ and Ar. p.2 ↗ Ultimate pressure in hydrogen-containing systems depends strongly on backing pump base pressure; choose a high-performance backing pump for light-gas applications. HiPace 400
Maximum permissible forevacuum pressure for N₂ is 11 hPa. p.2 ↗ The backing pump must maintain below 11 hPa at the foreline under process gas load; verify backing pump throughput at this limit. HiPace 400
Gas throughput at final rotational speed reaches 20 hPa·l/s (He) and 14 hPa·l/s (H₂), but only 6.5 hPa·l/s for N₂ and 3.5 hPa·l/s for Ar. p.2 ↗ Define process gas load limits per gas species; exceedance risks rotor slowdown/overheating. HiPace 400
Run-up time is 4 minutes. p.2 ↗ Interlock process gas admission or gate valve opening until ~4 min after start; consider the power failure venting unit option for safe shutdown. HiPace 400
Mounting orientation is arbitrary. p.3 ↗ The pump can be installed horizontally or vertically, simplifying integration in tight spaces; support its ~11.6 kg weight accordingly. HiPace 400
Gas inlet is DN 100 ISO-K/ISO-F/CF-F; outlet is DN 25 ISO-KF / G 1/4". p.3 ↗ Select matching DN 100 high-vacuum fittings (including CF for UHV/ bake-out-flange designs) and DN 25 ISO-KF foreline plumbing. HiPace 400
Standard communication interfaces are RS-485 and remote. p.3 ↗ Basic control/monitoring over RS-485; for fieldbus integration (e.g. Profibus, EtherCAT), order one of the fieldbus option boards. HiPace 400
Hybrid bearing technology with superior bearing lubrication is used. p.1 ↗ Expect long maintenance intervals and reduced lubricant-related contamination versus oil-lubricated turbos; confirm lubrication_type for cleanroom/oil-free requirements. HiPace 400
Sound pressure level is 50 dBA per EN ISO 2151. p.2 ↗ Low noise enables installation in laboratory environments without additional acoustic enclosure. HiPace 400
Weight is approximately 11.6 kg. p.2 ↗ One-person handling feasible; ensure mounting brackets/clamps rated for this mass, optionally with the vibration damper accessory to decouple from chamber. HiPace 400
Accessories include a power failure venting unit and venting accessories. p.1 ↗ For fail-safe venting of the high-speed rotor during power loss, specify the power failure venting unit at ordering time to protect bearings. HiPace 400 (option)