Induztr
Engineering Digest Document Viewer Related Models

HiPace 800 with TC 400 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum HiPace 800 turbomolecular vacuum pump datasheet (3-page brochure, dated 15.09.2025). Covers the single HiPace 800 model, its performance data, interface/flange configuration, and available accessories/options.

Section-by-Section Technical Breakdown

pp. 1
Product Features

Highlights the HiPace 800's positioning as a high-performance pump with optimized rotor geometry and high gas throughput. Emphasizes reliability through hybrid bearing technology and superior bearing lubrication for long life.

  • High performance: optimized rotor geometry, enhanced gas load handling
  • High gas throughput, high pumping speed, compatible with a variety of backing pumps, high compression for light gases
  • Reliable: best-in-class hybrid bearing technology, superior bearing lubrication for long life cycle
pp. 2
Technical / Performance Data

Key performance figures: pumping speeds for N2, H2, He and Ar, compression ratios, gas throughput at final rotational speed, forevacuum limit, run-up time, noise and weight.

  • Pumping speed: N2 790 l/s, H2 580 l/s, He 700 l/s, Ar 780 l/s
  • Compression ratio: N2 1·10¹¹, H2 4·10⁵, He 3·10⁷, Ar 1·10¹¹
  • Gas throughput at final rotational speed: N2 6.5 hPa·l/s, H2 14 hPa·l/s, He 20 hPa·l/s, Ar 3.5 hPa·l/s
  • Forevacuum max. (N2): 11 hPa
  • Run-up time: 2 min
  • Sound pressure level (EN ISO 2151): 50 dBA
  • Weight approx.: 12.8 kg
pp. 3
Interfaces and Mounting

Standard communication interfaces and mounting/flange configuration. Mounting orientation is arbitrary, simplifying integration into different system layouts.

  • Communication interfaces (standard): RS-485, remote
  • Mounting orientation: arbitrary
  • Gas inlet: DN 200 ISO-K / ISO-F / CF-F
  • Gas outlet: DN 25 ISO-KF / G 1/4"
pp. 1
Accessories, Spare Parts and Options

List of available accessories and options for the HiPace 800, covering electrical, communication, venting and mounting hardware.

  • Electrical adapter, mains cable, connecting cable
  • Various fieldbus systems
  • Power supply kit and display unit
  • Mounting kit
  • Safety valve
  • Venting accessories and power failure venting unit
  • Vibration damper

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed for N2 is 790 l/s (H2 580 l/s, He 700 l/s, Ar 780 l/s) p.2 ↗ Size backing pump and process conductance based on the gas-specific speeds; N2 value is the reference for general sizing. HiPace 800
Compression ratio for N2 and Ar is 1·10¹¹, but only 4·10⁵ for H2 and 3·10⁷ for He p.2 ↗ Ultimate pressure for light gases (especially H2) is strongly dependent on forevacuum pressure; select an efficient backing pump when low H2 base pressure is required. HiPace 800
Maximum forevacuum pressure for N2 is 11 hPa p.2 ↗ The backing pump must maintain foreline pressure below 11 hPa at maximum gas throughput to avoid loss of pumping action. HiPace 800
Gas throughput at final rotational speed is 6.5 hPa·l/s (N2), 14 hPa·l/s (H2), 20 hPa·l/s (He), 3.5 hPa·l/s (Ar) p.2 ↗ Defines the maximum continuous process gas load per gas species; relevant for sputtering, etching or load-lock applications. HiPace 800
Run-up time to final rotational speed is 2 minutes p.2 ↗ Process interlocks should allow ~2 min after start before opening the high-vacuum valve; short run-up enables fast cycling. HiPace 800
Sound pressure level is 50 dBA per EN ISO 2151 p.2 ↗ Low noise allows installation in lab environments without special acoustic enclosure. HiPace 800
Weight is approx. 12.8 kg p.2 ↗ Support structures and mounting flanges must be rated accordingly; relatively light for DN 200 inlet pumps, easing handling. HiPace 800
Gas inlet flange is DN 200 ISO-K / ISO-F / CF-F; outlet is DN 25 ISO-KF / G 1/4" p.3 ↗ High-vacuum side must use DN 200 flange hardware; foreline sizing should match DN 25 ISO-KF or G 1/4" connections. HiPace 800
Mounting orientation is arbitrary p.3 ↗ The pump can be installed in any orientation, giving flexibility in chamber and system layout without derating. HiPace 800
Standard communication interfaces are RS-485 and remote p.3 ↗ Integration with controllers/PC monitoring via RS-485; fieldbus options are available as accessories if a higher-level bus (e.g., Profibus/EtherCAT-type) is required. HiPace 800
Hybrid bearing technology with superior bearing lubrication is used p.1 ↗ Long bearing life cycle; relevant for maintenance interval planning and for applications sensitive to lubricant. HiPace 800
A power failure venting unit and venting accessories are offered as options p.1 ↗ Specify the venting unit to protect the pump from contamination/backstreaming during power failures; safety valve is also available for foreline protection. HiPace 800 (as options)
A vibration damper and mounting kit are available as accessories p.1 ↗ Use the vibration damper to mechanically decouple the pump from the chamber to reduce vibration transfer to sensitive processes/instruments. HiPace 800 (as options)
Compatible with a variety of backing pumps (optimized rotor geometry, enhanced gas load handling) p.1 ↗ Backing pump choice can be made from existing inventory as long as the 11 hPa forevacuum limit is maintained. HiPace 800