Induztr
Engineering Digest Document Viewer Related Models

HiPace 300 P with TC 400 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum HiPace 300 P turbomolecular vacuum pump, a single high-performance variant designed for coating processes with optimized rotor/stator concept. Covers available accessories, spare parts and options (power supply kit, display unit, venting, safety valve, vibration damper, fieldbus interfaces).

Section-by-Section Technical Breakdown

pp. 1
Product Highlights & Features

Introduces the HiPace 300 P as a high-performance turbomolecular pump specially designed for coating processes with an optimized rotor/stator concept. Emphasizes reliability via hybrid bearing technology and ease of maintenance including on-site bearing change and dust insensitivity.

  • High performance: designed for coating processes, optimized rotor/stator concept
  • Reliable: best-in-class hybrid bearing technology, long life cycle, maximum uptime
  • Easy maintenance: on-site bearing change possible, insensitive to process dust
pp. 1
Accessories, Spare Parts and Options

Lists available accessories and options that can be ordered with the HiPace 300 P, covering electrical connections, fieldbus communication, venting, mounting, and vibration isolation.

  • Electrical adapter
  • Mains cable
  • Connecting cable
  • Various fieldbus systems
  • Power supply kit and display unit
  • Mounting kit
  • Safety valve
  • Venting accessories
  • Power failure venting unit
  • Vibration damper
pp. 2-3
Technical Data

Key performance and physical data for the HiPace 300 P, including pumping speeds, compression ratios, gas throughput, run-up time, interfaces, flange connections and weight.

  • Pumping speed: N₂ 245 l/s, H₂ 125 l/s, He 220 l/s, Ar 250 l/s
  • Compression ratio: N₂ 1·10⁶, H₂ 3·10², He 2.2·10³, Ar 1·10⁷
  • Gas throughput at final rotational speed: N₂ 17 hPa·l/s, H₂ 50 hPa·l/s, He 20 hPa·l/s, Ar 4.4 hPa·l/s
  • Max. forevacuum pressure for N₂: 1 hPa
  • Run-up time: 1.2 min
  • Communication interfaces standard: RS-485, remote
  • Mounting orientation: arbitrary
  • Gas inlet / outlet: DN 100 ISO-K/ISO-F/CF-F / DN 16 ISO-KF / G 1/4"
  • Sound pressure level (EN ISO 2151): 50 dBA
  • Weight approx.: 6.4 kg

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed is 245 l/s for N₂, 250 l/s for Ar, 220 l/s for He and 125 l/s for H₂. p.2 ↗ Size backing pumps and process timelines using the gas-specific values rather than a single nominal figure; heavy gases (Ar) achieve the highest speed. HiPace 300 P
Compression ratio is 1·10⁶ for N₂, 1·10⁷ for Ar, 2.2·10³ for He and only 3·10² for H₂. p.2 ↗ Ultimate pressure for light gases (H₂) is strongly limited by backing pressure; a low backing pressure is essential for hydrogen-sensitive vacuum processes. HiPace 300 P
Maximum permissible forevacuum pressure is 1 hPa (for N₂). p.2 ↗ The backing pump must maintain ≤1 hPa at the foreline to operate safely; select a backing pump with adequate capacity at this level. HiPace 300 P
Gas throughput at final rotational speed: 17 hPa·l/s (N₂), 50 hPa·l/s (H₂), 20 hPa·l/s (He), 4.4 hPa·l/s (Ar). p.2 ↗ Defines the maximum permissible process gas load before the pump stalls out of its operating range; size gas flow in coating processes accordingly. HiPace 300 P
Run-up time to final rotational speed is 1.2 min. p.2 ↗ Process start can begin shortly after power-on; suitable for cyclic/short coating runs. HiPace 300 P
Gas inlet flange is DN 100 ISO-K/ISO-F/CF-F; outlet is DN 16 ISO-KF or G 1/4". p.3 ↗ Select mating flange components and foreline hardware matching these connections; CF-F option supports high-vacuum metal-sealed applications. HiPace 300 P
Mounting orientation is arbitrary. p.3 ↗ The pump can be installed in any orientation, simplifying integration into coating chambers with constrained layouts. HiPace 300 P
Standard communication interfaces are RS-485 and remote. p.3 ↗ Integrates into pump control/monitoring via RS-485; additional fieldbus systems are available as options. HiPace 300 P
Sound pressure level is 50 dBA per EN ISO 2151. p.2 ↗ Low noise allows installation close to operators without special acoustic enclosure in most labs. HiPace 300 P
Approximate weight is 6.4 kg. p.2 ↗ Light enough for single-person handling and for mounting on chamber flanges without extra structural support; verify with vibration damper accessory. HiPace 300 P
Hybrid bearing technology with on-site bearing change capability and insensitivity to process dust. p.1 ↗ Bearing maintenance can be performed in situ without removing the pump from the system, reducing downtime in dusty coating processes. HiPace 300 P
A power failure venting unit and venting accessories are available as options, along with a safety valve. p.1 ↗ For process safety, specify the power failure venting unit to automatically vent the chamber on power loss; safety valve protects against overpressure events. HiPace 300 P
A vibration damper is offered as an accessory. p.1 ↗ Use between pump and chamber to decouple vibration when precision coating or sensitive instrumentation is involved. HiPace 300 P
The optimized rotor/stator concept is specifically designed for coating processes. p.1 ↗ Preferred selection for PVD/sputtering-style applications compared to general-purpose turbopumps of similar size. HiPace 300 P