Induztr
Engineering Digest Document Viewer Related Models

HiPace 10 Neo — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum HiPace 10 Neo turbomolecular vacuum pump datasheet. Single compact model; document lists available accessories/options: electrical adapter, mains cable, connecting cable, CIP adapter, power supply kit and display unit, pressure sensor, mounting kit, safety valve, venting accessories, power failure venting unit. No ordering codes given.

Section-by-Section Technical Breakdown

pp. 1
Product Features and Accessories

Highlights the HiPace 10 Neo as the smallest turbomolecular pump on the market, robust thanks to mechanical (ball) bearings, and designed for flexible, portable/mobile use. Automatic accessory detection is supported. A list of available accessories and options is provided.

  • Smallest turbomolecular vacuum pump on the market (compact)
  • Most robust turbomolecular pump on the market thanks to mechanical bearings
  • Automatic accessory detection; specially designed for mobile/portable use
  • Accessories/options: electrical adapter, mains cable, connecting cable, CIP adapter, power supply kit and display unit, pressure sensor, mounting kit, safety valve, venting accessories, power failure venting unit
pp. 2
Technical Data and Performance

Key performance data: pumping speeds, compression ratios, ultimate pressure, run-up time, interfaces, noise, and protection class. Ball bearing construction and a maximum N₂ forevacuum pressure of 25 hPa are specified.

  • Pumping speed: Ar 13 l/s, N₂ 12 l/s, He 6.5 l/s, H₂ 4 l/s
  • Compression ratio: Ar 2.5·10⁷, N₂ 3·10⁶, He 3·10³, H₂ 3·10²
  • Ultimate pressure: 5·10⁻⁵ hPa (mbar)
  • Run-up time: 45 s
  • I/O interfaces: RS485, remote
  • Sound pressure level (EN ISO 2151): <50 dB(A)
  • Protection class: IP20 type 1
  • Input voltage: 24 V DC (±10%)
  • Forevacuum max. for N₂: 25 hPa (mbar)
  • Bearing: ball bearing (mechanical)
pp. 3
Mechanical Data and Mounting

Physical dimensions, weight, rotational speed and mounting orientation information for installation planning.

  • Dimensions (L x W x H): 83.4 x 55 x 186 mm
  • Weight: 1.3 kg
  • Rotational speed: 90,000 min⁻¹ (±2%), variable 50–100%
  • Mounting orientation: arbitrary

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Input voltage is 24 V DC with ±10% tolerance. p.2 ↗ Power supply design must deliver 21.6–26.4 V DC; optional power supply kit is available for mains operation. HiPace 10 Neo
Pumping speeds: 12 l/s (N₂), 13 l/s (Ar), 6.5 l/s (He), 4 l/s (H₂). p.2 ↗ Suitable only for small-chamber or analytical applications; size backing pump and conductance accordingly. HiPace 10 Neo
Ultimate pressure is 5·10⁻⁵ hPa. p.2 ↗ Defines the achievable base pressure limit for system design. HiPace 10 Neo
Compression ratios: N₂ 3·10⁶, Ar 2.5·10⁷, He 3·10³, H₂ 3·10². p.2 ↗ Light gases (H₂, He) have low compression; for hydrogen-bearing processes a good backing pressure is essential. HiPace 10 Neo
Maximum permissible forevacuum pressure for N₂ is 25 hPa. p.2 ↗ Backing pump must maintain foreline pressure below 25 hPa at full gas throughput to avoid pump overload. HiPace 10 Neo
Run-up time is 45 s. p.2 ↗ Process start sequences should account for ~45 s before full pumping speed is available. HiPace 10 Neo
Rotational speed is 90,000 min⁻¹ ±2%, and can be varied between 50% and 100%. p.3 ↗ Speed can be throttled (e.g. to reduce light-gas heating or vibration) via control interface; speed accuracy ±2%. HiPace 10 Neo
Bearing type is a mechanical ball bearing. p.1 ↗ No magnetic levitation or lubricant circulating system; robust and portable but bearing wear must be considered in maintenance planning (spare parts available). HiPace 10 Neo
Dimensions are 83.4 x 55 x 186 mm (L x W x H) and weight is 1.3 kg. p.3 ↗ Very small footprint allows integration into compact or portable systems; mounting brackets via mounting kit option. HiPace 10 Neo
Mounting orientation is arbitrary. p.3 ↗ Pump can be installed in any orientation, simplifying mechanical integration. HiPace 10 Neo
Sound pressure level is <50 dB(A) per EN ISO 2151. p.2 ↗ Suitable for desktop/laboratory environments without additional noise enclosure. HiPace 10 Neo
Protection class is IP20 type 1. p.2 ↗ No protection against water/dust ingress; must be installed in a dry, clean environment. HiPace 10 Neo
I/O interfaces are RS485 and remote. p.2 ↗ Control/monitoring integration via RS485 (e.g. with display unit or pressure sensor) or hardwired remote signals. HiPace 10 Neo
A power failure venting unit and venting accessories are offered as options, plus a safety valve. p.1 ↗ For unattended operation, specify automatic venting on power failure to protect the process chamber; safety valve protects against overpressure. HiPace 10 Neo