Induztr
Engineering Digest Document Viewer Related Models

HiPace 700 M with TM 700 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum HiPace 700 M magnetically levitated turbomolecular vacuum pump. Single-model datasheet (3 pages) covering technical data; no ordering codes or variant matrix given. Accessories/options listed: electrical adapter, mains cable, connecting cable, fieldbus systems, power supply kit and display unit, pressure sensor, mounting kit, safety valve, venting accessories, power failure venting unit.

Section-by-Section Technical Breakdown

pp. 1
Product Features

Highlights the HiPace 700 M's magnetic suspension, quiet operation, and reliability. The electromagnetic bearing system makes the pump maintenance-free and protects the rotor from wear, with continuous rotor imbalance compensation. Operation is hydrocarbon-free with automatic sensor calibration during running operation.

  • Maintenance-free: electromagnetic suspension protects rotor from premature wear
  • Continuous rotor imbalance compensation
  • Low noise and vibration levels
  • Hydrocarbon-free operation
  • Automatic sensor calibration during operation
pp. 3
Technical Data

Key mechanical and performance data for the HiPace 700 M. Pumping speeds up to 685 l/s (N₂), high compression ratios, and a max forevacuum pressure of 8 hPa for N₂. Arbitrary mounting orientation and a run-up time of 4 minutes.

  • Weight approx. 15.7 kg
  • Communication interfaces standard: RS-485, remote
  • Mounting orientation: arbitrary
  • Gas inlet: DN 160 ISO-K/ISO-F/CF-F; outlet: DN 25 ISO-KF / G 1/4"
pp. 2
Pumping Speed and Performance Data

Gas-dependent pumping speeds, compression ratios, and gas throughputs. N₂ pumping speed is 685 l/s; the max forevacuum pressure for N₂ is 8 hPa. Sound pressure level 45 dBA per EN ISO 2151.

  • Pumping speed: N₂ 685 l/s, H₂ 480 l/s, He 600 l/s, Ar 660 l/s
  • Compression ratio: N₂ 1·10¹¹, H₂ 2·10⁵, He 1·10⁷, Ar 1·10¹¹
  • Gas throughput at final rotational speed: N₂ 13 hPa·l/s, Ar 8 hPa·l/s
  • Gas throughput at 0.1 hPa HV-pressure: He 16 hPa·l/s, H₂ 16 hPa·l/s, N₂ 16 hPa·l/s
  • Forevacuum max. for N₂: 8 hPa
  • Run-up time: 4 min
  • Sound pressure level (EN ISO 2151): 45 dBA
pp. 1
Accessories, Spare Parts and Options

List of available accessories, spare parts, and optional equipment for integration. Includes electrical and connectivity components as well as process-related options like venting and safety accessories.

  • Electrical adapter, mains cable, connecting cable
  • Various fieldbus systems
  • Power supply kit and display unit
  • Pressure sensor
  • Mounting kit, safety valve
  • Venting accessories and power failure venting unit

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Pumping speed for N₂ is 685 l/s (H₂ 480 l/s, He 600 l/s, Ar 660 l/s). p.2 ↗ Size the pump for process gas; use Ar/N₂ values for sputtering-like loads, note the reduced H₂ speed for hydrogen-containing processes. HiPace 700 M
Compression ratio: N₂ 1·10¹¹, H₂ 2·10⁵, He 1·10⁷, Ar 1·10¹¹. p.2 ↗ Ultimate pressure is dominated by the low H₂ compression ratio (2·10⁵); hydrogen backstreaming limits achievable base pressure unless foreline pressure is kept low. HiPace 700 M
Maximum forevacuum pressure for N₂ is 8 hPa. p.2 ↗ Backing pump must maintain ≤8 hPa foreline pressure at the rated N₂ throughput (13 hPa·l/s at final speed), i.e. backing speed of roughly 1.6 l/s minimum. HiPace 700 M
Gas throughput at final rotational speed is 13 hPa·l/s for N₂ and 8 hPa·l/s for Ar; 16 hPa·l/s at 0.1 hPa for N₂, H₂, He. p.2 ↗ Defines the usable throughput envelope for process gas sizing and critical backing-pump sizing. HiPace 700 M
Run-up time is 4 minutes. p.2 ↗ Wait ≥4 min after start before opening the high-vacuum valve or expecting full pumping performance; relevant for duty-cycle planning. HiPace 700 M
Gas inlet is DN 160 ISO-K/ISO-F/CF-F; outlet is DN 25 ISO-KF / G 1/4". p.3 ↗ Flange selection for chamber interface and fore-vacuum line must match these connections; G 1/4" allows a venting or purge port via the outlet flange options. HiPace 700 M
Mounting orientation is arbitrary. p.3 ↗ The pump can be installed in any orientation, simplifying integration into space-constrained systems without performance penalty. HiPace 700 M
Weight is approx. 15.7 kg. p.3 ↗ Mounting brackets and chamber flange loads can be dimensioned for a light pump; magnetic levitation avoids a heavy oil-lubricated bearing housing. HiPace 700 M
Standard communication interfaces are RS-485 and remote. p.3 ↗ Direct integration with Pfeiffer controllers/PC control via RS-485; fieldbus options available as accessories if a specific industrial bus is required. HiPace 700 M
Sound pressure level is 45 dBA (EN ISO 2151). p.2 ↗ Suitable for laboratory environments without additional acoustic enclosures in most cases. HiPace 700 M
The pump uses electromagnetic (magnetic) suspension with continuous rotor imbalance compensation and is maintenance-free. p.1 ↗ No bearing lubrication or periodic bearing service intervals; no oil/contamination risk in the vacuum system (hydrocarbon-free). HiPace 700 M
Sensor calibration is automatic and occurs during operation. p.1 ↗ No manual recalibration downtime required; speed/frequency monitoring remains valid throughout operation. HiPace 700 M
Optional accessories include a power failure venting unit and safety valve. p.1 ↗ For safety-critical installations, specify the power-failure venting unit so the pump vents automatically on power loss, protecting the chamber from oil-free contamination events. HiPace 700 M (options)