No photo available yet

Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Handheld FTIR, Mobile Nondestructive Testing

Agilent Technologies Handheld FTIR, Mobile Nondestructive Testing — Molecular spectroscopy.

The Agilent 4300 is a handheld mid-IR FTIR spectrometer for nondestructive testing, using optically matched sample interfaces and a germanium ATR crystal with 0.5–2 µm sampling depth at an 82° angle of incidence. It weighs 5 lbs and runs Agilent MicroLab software. Within the FTIR Compact Portable Systems series, it is the handheld, field-deployable modification for direct surface analysis without sample preparation.

Agilent Technologies FTIR Compact Portable Systems Series — Model Comparison & Selection

Model Wavelength rangeWeight, kgAnalysis time, minDimensions, mmPower supplyProtection rating
Handheld FTIR, Mobile Nondestructive Testing Current —2.27————
4200 FlexScan 4000...650—————
4500 Portable FTIR Spectrometer, Rugged Non-Lab Analyzer —3.6less than two minutes203battery or mains54
Compact FTIR Spectrometer, At-side FTIR Analyzer —3.6less than two minutes203battery or mains54

Full specifications

Core Performance & Functional Specifications
Software Agilent MicroLab
Measurement mode mfr handheld, nondestructive, mid-IR IR
Angle of incidence mfr 82 °
Dimensions, Weight & Mechanical Design
Weight 5 lbs
Germanium ATR sampling depth mfr 0.5...2 micrometers
Interfaces, Connections & Control
Sample interface mfr optically matched sample interfaces interfaces

Description

Construction and positioning

Behavior and measurement

Installation and operation

Integration & Operating Notes

Process Limits
ATR sampling depth limits analysis to surface layers

The germanium ATR crystal samples only 0.5–2 µm deep at 82° incidence. Bulk composition or subsurface layers are not probed; results represent the immediate surface. Ensure the sample surface is representative and in full contact with the crystal.

Factory Specification Sheet
Control & I/O
MicroLab software drives measurement and analysis

Agilent MicroLab is the specified software. No interface details (USB, wireless, etc.) are provided in the verified facts; confirm host connectivity and power requirements with Agilent before deployment.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the 4300 handheld FTIR instead of the 4200 FlexScan or 4500 Portable FTIR?

Choose the 4300 for true handheld, nondestructive surface analysis with an 82° Ge ATR interface (0.5–2 µm depth) and 5 lb weight. The 4200 FlexScan and 4500 Portable are separate series siblings; their specs are not in the verified facts, so compare their portability and sampling modes directly with Agilent.

What adjacent system parts or interfaces are required to operate the 4300?

The 4300 uses optically matched sample interfaces and Agilent MicroLab software. No drive, power supply, controller, or mating flange specifications are given in the verified facts. Confirm host computer requirements, power, and any interface accessories with Agilent before integration.

What maintenance and accessories are needed, and what is not included?

No maintenance schedule, service intervals, or included accessories are specified in the verified facts. The ATR crystal requires routine cleaning; confirm cleaning kits, calibration standards, and carrying cases as separate items with Agilent. The base delivery contents are not listed.

Dimensional Drawings & Technical Documentation

Technical documentation