Nabertherm GF 240
Nabertherm GF 240 — Fusing furnaces.
The GF 240 is a fixed-table fusing furnace with a 1010 × 810 × 400 mm chamber and 950 °C maximum temperature, positioned as the largest sibling alongside the GF 75. Its 11 kW three-phase connection and 275 kg mass suit stationary integration into glass fusing or heat-treatment cells where the work is loaded onto a fixed hearth.
Nabertherm GF Series — Model Comparison & Selection
| Model | Electrical connection | Max temperature, °C | Weight, kg |
|---|---|---|---|
| GF 240 Current | 3-phase | 950 | 275 |
| GF 75 | 1-phase | 900 | 180 |
Full specifications
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Nominal power | 11 kW |
| Floor space mfr | 0.81 |
| Inner dimensions (W × D × H) mfr | 1010 × 810 × 400 mm |
| Outer dimensions (W × D × H) mfr | 1460 × 1140 mm |
| Weight | 275 kg |
| Weight | 275 kg |
| Max temperature | 950 °C |
| Max temperature | 950 °C |
Description
Construction and series positioning
- Fixed-table architecture: the hearth is integral to the furnace body, so work is loaded onto a stationary table rather than a movable bogie or lift table.
- Chamber envelope of 1010 × 810 × 400 mm (W × D × H) and 0.81 floor space distinguish this as the large-frame unit of the series; the GF 75 is the smaller sibling.
- Outer dimensions 1460 × 1140 mm (W × D) and 275 kg mass define the footprint and handling requirement at installation.
- Maximum working temperature 950 °C with an 11 kW nominal rating on a 3-phase supply.
Behavior and duty
- No digitized curve points or cool-down data are available for this model; thermal behavior should be taken from the controller documentation and commissioning measurements rather than assumed.
- The 950 °C ceiling places the unit in the fusing/softening range for glass work; process recipes must be validated against the actual controller configuration.
Control and operation
- The attached process-control digest covers the Nabertherm 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types; the furnace is operated through this controller family.
- No furnace-specific wiring, thermocouple type, or connection diagram is printed in the supplied digests, so electrical integration details must come from the model-specific manual.
Integration & Operating Notes
The 275 kg unit weight is the empty furnace; the structural floor and any plinth must be assessed for the furnace mass plus the workload placed on the fixed table, and the 1460 × 1140 mm outer envelope must be kept clear for access and service.
Because the table is fixed, the charge is placed and removed through the chamber opening; loading fixtures and glass charges must be sized to the 1010 × 810 × 400 mm envelope and the process recipe must not command setpoints above the 950 °C maximum.
Selection & Integration Q&A
Choose the GF 240 when the work requires the 1010 × 810 × 400 mm chamber and the 950 °C / 11 kW large-frame capability; the GF 75 is the smaller sibling for reduced charge sizes. Confirm the 275 kg mass and 0.81 floor space fit the intended site before ordering.
A 3-phase supply sized for the 11 kW nominal load, plus the Nabertherm 500-series controller environment described in the process-control documentation. The model-specific wiring diagram and thermocouple type are not in the supplied digests and must be obtained before connecting to plant control.
The supplied digests contain no GF 240-specific maintenance schedule, spare-parts list or included-accessory list. Controller and recorder options are described only at the 500-series family level; consumables, cables and fixtures must be specified separately from the model manual.