Nabertherm KC 150/14
Nabertherm KC 150/14 — Tilting Furnaces Electrically Heated Or Gas Fired.
The KC 150/14 is a SiC-rod-heated tilting melting furnace with a 1000 kg crucible capacity (TPC 412 crucible) and 2202 kg melting performance, built for foundry melt supply. Its 1450 °C maximum temperature and 112 kW nominal power place it in the larger KC series, within the KC 20/14 to KC 180/14 range. The tilting design allows controlled pouring into downstream casting lines.
Nabertherm KC Series — Model Comparison & Selection
| Model | Heating power, W | Weight, kg | Max temperature, °C |
|---|---|---|---|
| KC 150/14 Current | 66 | 2700 | 1450 |
| KC 180/14 | 99 | 3000 | 1450 |
Full specifications
| Heating power | 66 watt |
| Nominal power | 112 kW |
| Crucible mfr | TPC 412 |
| Capacityin kg mfr | 1000 |
| Melting performance3in kg mfr | 2202 |
| Outer dimensions (W × D × H) mfr | 2000 × 2070 × 1300 mm |
| Weight | 2700 kg |
| Max temperature | 1450 °C |
Description
Construction and series positioning
- The KC 150/14 is a SiC-rod-heated tilting furnace from the KC series (KC 20/14 to KC 180/14), intended for melting and holding metal in foundry operations.
- It uses crucible TPC 412 with a capacity of 1000 kg and a stated melting performance of 2202 kg.
- Outer dimensions are 2000 × 2070 × 1300 mm (W × D × H); unit weight is 2700 kg.
- Within the series, the KC 150/14 sits below the KC 180/14 sibling in model numbering but shares the same 1450 °C maximum temperature class.
Thermal and electrical behavior
- Maximum temperature is 1450 °C, supported by 112 kW nominal power.
- A separate 'heating_power' entry of 66 W is present in the matched specs; because it is inconsistent with the 112 kW nominal power for a melting furnace of this size, it is omitted from this overview.
- No digitized curve points are available, so heat-up and melting-rate behavior cannot be quantified beyond the stated melting performance.
Control and operation
- The attached controller documentation covers Nabertherm series 500 controllers and the MyNabertherm app, including process data storage and temperature uniformity instrumentation per AMS2750F.
- No KC-specific installation, connection, or control details are provided in the document digests; refer to the furnace manual for wiring, tilting mechanism, and crucible handling instructions.
Integration & Operating Notes
The SiC rod heating elements and crucible are rated for a maximum temperature of 1450 °C. Operating above this limit risks element degradation, crucible failure, and invalid melt quality; the controller must be configured with an over-temperature limit below this value.
The furnace draws 112 kW nominal power. Electrical supply, protection devices, and cable sizing must be engineered for this load; the 66 W heating_power entry in the spec table is inconsistent and should not be used for supply design.
Nabertherm series 500 controllers support process data storage and AMS2750F temperature uniformity instrumentation. Specify the controller variant and any recorder options at order; these are not detailed in the KC-specific documentation.
Selection & Integration Q&A
Choose the KC 150/14 when you need a 1000 kg crucible capacity (TPC 412) and 2202 kg melting performance at up to 1450 °C. The KC 180/14 is the next size in the series; smaller KC 20/14 to KC 80/14 models suit lower throughput. Confirm melt rate and crucible size against your casting cycle.
The furnace has a nominal power of 112 kW. The supply must be sized for this load with appropriate switchgear and overcurrent protection. The 66 W 'heating_power' entry in the spec table is inconsistent with a 112 kW melting furnace and should not be used for electrical design; consult the furnace manual for exact voltage and current.
The base delivery does not include the crucible TPC 412, controller options, or recorder. SiC heating rods are consumables subject to wear at 1450 °C; spare rods and a rod replacement schedule should be planned. Controller configuration and process data storage require the series 500 controller or MyNabertherm app, ordered separately.