Nabertherm LHT 08/17
Nabertherm ·Made in Germany · In Active Production

Nabertherm LHT 08/17

Nabertherm LHT 08/17 — High-temperature furnaces.

The LHT 08/17 is a high-temperature chamber furnace with an 8-litre, 200 × 200 × 200 mm chamber and MoSi₂ heating elements reaching 1750 °C, connected via a 3-phase supply drawing 6.70 kW. Within the LHT ../17 series it is the largest non-D variant, positioned above the 2- and 4-litre models and the D-equipped 1- and 3-litre siblings. It serves laboratory sintering, annealing and melting duties requiring clean, fast high-temperature cycles.

Nabertherm LHT Series — Model Comparison & Selection

Model Chamber volume, LElectrical connectionMax temperature, °CWeight, kg
LHT 08/17 Current 83-phase4175047
LHT 02/17 21-phase175033
LHT 04/17 41-phase175039
LHT 08/18 83-phase4180047

Full specifications

Core Performance & Functional Specifications
Chamber volume 8 l
Electrical connection 3-phase4
Connected mfr 6.70
Heating time mfr 50 min
Inner dimensions (W × D × H) mfr 200 × 200 × 200 mm
Outer dimensions (W × D × H) mfr 500 × 500 mm
Dimensions, Weight & Mechanical Design
Weight 47 kg
Operating Conditions, Environment & Protection
Max temperature 1750 °C

Description

Construction and series positioning

Thermal behaviour

Electrical and control

Integration & Operating Notes

Process Limits
Do not exceed the 1750 °C maximum working temperature

The MoSi₂ element set and chamber insulation are rated to a 1750 °C maximum. Process recipes, over-temperature protection setpoints and controller limits must be configured so that the chamber never runs above this value, since exceeding it degrades the heating elements and invalidates results.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the LHT 08/17 rather than one of the smaller LHT ../17 siblings?

Pick the 08/17 when the 8-litre, 200 × 200 × 200 mm chamber is needed for larger or multiple charges at up to 1750 °C. The 01/17 D, 02/17, 03/17 D and 04/17 offer smaller chambers; the D-suffixed models differ in configuration, so compare their stated features before deciding.

What supply and protective equipment does the LHT 08/17 require from the building services?

A 3-phase 4-wire connection sized for the 6.70 kW connected load. The distribution board, protective device and cable cross-section must be engineered for this three-phase load; confirm the nameplate data on delivery before connecting.

What is supplied with the base unit and what must be ordered separately?

The verified facts list only the furnace itself: 8-litre chamber, MoSi₂ elements, 3-phase connection, 47 kg. Controller type, process-data recording, over-temperature protection hardware and any connecting cable are not confirmed as part of base delivery and must be specified at order.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF