Nabertherm N 81/13
Nabertherm N 81/13 — Prozesse Unter Luft.
The N 81/13 is a 3-phase electrically heated chamber furnace with an 80 l working volume (500 × 750 × 250 mm) and a maximum temperature of 1300 °C. Within the N-series it is the 80-litre, 1300 °C modification, distinguished from the N 81 and the higher-temperature N 41/H and N 87/H siblings. It serves as a batch heat-treatment unit for processes under air.
Nabertherm Chamber Furnaces electrically heated | Nabertherm Series — Model Comparison & Selection
Full specifications
| Chamber volume | 80 l |
| Chamber volume | 80 l |
| Chamber volume | 80 l |
| Chamber volume | 80 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Heating mfr | 22.0 |
| Inner dimensions (W × D × H) mfr | 500 × 750 × 250 mm |
| Outer dimensions (W × D × H) mfr | 1300 × 2000 × 2000 mm |
| Weight | 970 kg |
| Weight | 970 kg |
| Weight | 970 kg |
| Weight | 970 kg |
| Max temperature | 1300 °C |
| Max temperature | 1300 °C |
| Max temperature | 1300 °C |
| Max temperature | 1300 °C |
Description
Construction and series positioning
- The N 81/13 is a floor-standing chamber furnace: outer dimensions 1300 × 2000 × 2000 mm, weight 970 kg, 3-phase electrical connection.
- Its 80 l chamber (500 × 750 × 250 mm) is a flat, wide format — 750 mm depth against only 250 mm height — suited to low, spread-out loads rather than tall stacks.
- Within the series, the N 81 is the same 80-litre size without the /13 temperature suffix; the N 41/H and N 87/H are the neighbouring variants. The /13 code denotes the 1300 °C class of this modification, not a rating.
Thermal behaviour
- Maximum working temperature is 1300 °C. No heating-curve or uniformity data is available for this model, so no ramp rates or uniformity figures are stated here.
- The category path places the unit in processes under air; no controlled-atmosphere or vacuum capability is documented for this model.
Control and documentation
- The attached controller document covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but it prints no furnace model sizes or ordering codes; controller fitment for the N 81/13 must therefore be confirmed against the order specification.
- The remaining attached digests (fiber-optics glass, foundry, dental) cover other product lines and contain no actionable facts for this furnace.
Integration & Operating Notes
The controller documentation describes 500-series controllers, MyNabertherm app connectivity, process-data storage and AMS2750F instrumentation types, but does not tie any of these to the N 81/13. Confirm the actual controller, interface and recorder configuration against the order before designing data acquisition around it.
Selection & Integration Q&A
Pick the N 81/13 when you need the 80 l chamber at up to 1300 °C. The N 81 is the same 80-litre size without the /13 temperature class; the N 41/H and N 87/H are the other series variants. Compare their chamber volumes and temperature classes against your charge size and process temperature before deciding.
The furnace is a 3-phase unit, but the verified data give no voltage, current or connected load. Size the supply, breaker and cable from the nameplate and order-specific connection diagram, and provide a 3-phase circuit rather than adapting a single-phase feed.
Allow for a 970 kg floor load on a 1300 × 2000 mm footprint and 2000 mm height, on a level load-bearing floor with clearance for loading and control access. Keep setpoints at or below 1300 °C and arrange loads within the 500 × 750 × 250 mm chamber; no other duty-cycle limits are documented.
The verified facts list only the furnace itself: no controller model, recorder, thermocouples, cables or data interface are confirmed as included. The controller documentation covers 500-series units and the MyNabertherm app as options, so specify controller, instrumentation and any recorder explicitly on the order.