Nabertherm NR(A) 40/..
Nabertherm ·Made in Germany · In Active Production

Nabertherm NR(A) 40/..

Nabertherm NR(A) 40/.. — Hot Wall Retort Furnaces.

The NR(A) 40/.. is a hot-wall retort furnace with a 40-litre useful volume and a work space of 325 × 400 × 325 mm, positioned as the smallest chamber in the NR(A) series alongside the 100-, 160- and 1000-litre siblings. Its hot-wall retort construction is intended for processes requiring a defined, indirectly heated retort atmosphere up to the series limit of 1100 °C. The model code denotes chamber volume, not an electrical rating.

Nabertherm NR(A) Series — Model Comparison & Selection

Model
NR(A) 40/.. Current
NR(A) 160/..

Full specifications

Core Performance & Functional Specifications
Work space dimensions in mm mfr 325
Useful volume mfr 40
Connected1 mfr 34
Outer dimensions (W × D × H) mfr 12002 × 1600 × 1900 mm

Description

Construction and series positioning

Thermal behaviour and media

Control, installation and operation

Integration & Operating Notes

Process Limits
Do not exceed the 1100 °C series ceiling in the retort

The 1100 °C figure is the series maximum; operating the retort above it risks heater, insulation and retort damage. Because no model-specific over-temperature limit is published for the 40-litre chamber, the controller's limit function should be set from the model operating manual, not from the series headline value alone.

Series designation 'Hot-Wall Retort Furnaces up to 1100 °C'
Control & I/O
Controller platform is documented separately from the furnace

The controller digest describes 500-series controllers and the MyNabertherm app, including process-data recording and AMS2750F instrumentation types, but prints no furnace model codes. The actual controller fitted to an NR(A) 40/.. and its interface set must be confirmed on the order configuration.

Prozesssteuerung englisch, scope and variants
Electrical
Electrical data must come from the model rating plate

No voltage, phase or connected-load value for the NR(A) 40/.. appears in the verified facts; the factory 'Connected1' entry of 34 has no unit and cannot be interpreted. Size the supply and protection from the nameplate of the delivered unit.

Factory Specification Sheet
Mounting
Footprint cannot be taken from the listed outer dimensions

The stated outer dimensions of 12002 × 1600 × 1900 mm are inconsistent with a 40-litre work space and are treated as a data error. Obtain the general arrangement drawing for the NR(A) 40/.. before fixing floor space, door swing and service access.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the NR(A) 40/.. rather than the NR(A) 100/.. or NR(A) 160/..?

Pick the 40/.. when the batch fits the 325 × 400 × 325 mm work space and 40-litre useful volume, keeping the heated volume and connected load as small as possible. Move to the 100/.. or 160/.. when larger parts or higher throughput per cycle are required; all share the 1100 °C series ceiling.

What do I need to confirm about the controller and power supply before ordering an NR(A) 40/..?

Confirm the fitted controller from the 500-series/MyNabertherm options and whether AMS2750F instrumentation is required, since the controller document defines no model-specific fit. Electrical supply data is absent from the verified facts, so the nameplate of the delivered unit governs cable and protection sizing.

What installation and duty limits apply to this furnace?

The supplied documents give no clearance, floor-loading or duty-cycle figures for the NR(A) 40/.., and the listed outer dimensions are inconsistent with the 40-litre chamber. Installation clearances and permissible continuous operation must be taken from the model operating manual and arrangement drawing.

What maintenance and accessories are not covered by the base delivery?

No maintenance schedule, spare-parts list or scope-of-delivery breakdown for the NR(A) 40/.. is included in the verified facts. Retort, thermocouples, controller options, recording software and exhaust accessories should be clarified against the order documents rather than assumed as standard.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF