Nabertherm NR(A) 160/..
Nabertherm NR(A) 160/.. — Hot Wall Retort Furnaces.
Hot-wall retort furnace NR(A) 160/.. with a 450 × 800 × 450 mm work space (160 L useful volume) and a connected load of 74 (unit not stated). It sits between the NR(A) 100/.. and NR(A) 1000/.. in the series, serving processes that need a defined 160-litre retort chamber. The outer dimensions are listed as 14002 × 2300 × 2100 mm, which is inconsistent with the work-space figures and should be verified before layout.
Nabertherm NR(A) Series — Model Comparison & Selection
| Model |
|---|
| NR(A) 160/.. Current |
| NR(A) 40/.. |
Full specifications
| Work space dimensions in mm mfr | 450 |
| Useful volume mfr | 160 |
| Connected1 mfr | 74 |
| Outer dimensions (W × D × H) mfr | 14002 × 2300 × 2100 mm |
Description
Construction and series position
- The NR(A) 160/.. is a hot-wall retort furnace in the Nabertherm series rated up to 1100 °C. Its work space measures 450 × 800 × 450 mm and gives a useful volume of 160 (litres).
- Within the series it sits between the NR(A) 100/.. and the NR(A) 1000/..; the model number is a volume code, not an electrical rating.
- The listed outer dimensions (14002 × 2300 × 2100 mm) conflict with the work-space dimensions and are not used here; confirm the real footprint with the factory before planning floor space.
Load and media behaviour
- No curve points, matched performance specs, applications or certificates were supplied for this model, so heat-up rate, temperature uniformity and atmosphere capability cannot be stated.
- The connected load is listed as 74 with no unit; treat it as unverified and obtain the electrical data sheet before sizing the supply.
Control and operation
- The attached controller digest covers the Nabertherm 500 series and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but it prints no furnace model sizes or ordering codes.
- The other attached digests (fiber-optics glass, foundry, dental) cover different product lines and contain no NR(A) 160/.. facts; no installation, connection or operating details for this model can be drawn from them.
Integration & Operating Notes
The controller digest describes the 500 series and MyNabertherm app functions, including process-data storage and AMS2750F instrumentation types, but does not tie them to the NR(A) 160/.. or list ordering codes. Specify the controller and recorder as separate line items.
Selection & Integration Q&A
Pick the 160/.. when the workload fits a 450 × 800 × 450 mm work space (160 L useful volume). The 100/.. is smaller and the 1000/.. larger; no performance data for any of the three was supplied, so compare heat-up and uniformity from factory data before deciding.
The data sheet lists only 'Connected1 = 74' with no unit, voltage or phase count, so the supply cannot be determined from the available facts. Request the model-specific electrical data sheet and confirm voltage, phases and breaker rating before ordering cables or switchgear.
The listed outer dimensions (14002 × 2300 × 2100 mm) contradict the 450 × 800 × 450 mm work space and cannot be used. Obtain verified overall dimensions and clearance requirements from the factory before finalizing the floor layout.
No maintenance schedule, service intervals or accessory list for the NR(A) 160/.. appears in the supplied documents. The controller digest covers 500-series controllers and the MyNabertherm app as separate items; confirm consumables and spares with the factory.