Nabertherm R 170/1000/13
Nabertherm ·Made in Germany · In Active Production

Nabertherm R 170/1000/13

Nabertherm R 170/1000/13 — Tube furnaces.

The R 170/1000/13 is a compact tube furnace with a 170 mm outer tube diameter and a 1000 mm heated length, rated to 1300 °C and connected via a 3-phase supply. Its 1400 mm tube length and constant-temperature lengths of 330 mm and 500 mm distinguish it within the R series from smaller-bore siblings such as the R 50/250/13 and R 50/500/12.

Nabertherm Compact Tube Furnaces up to 1300 °C | Nabertherm Series — Model Comparison & Selection

Model Electrical connectionMax temperature, °CWeight, kg
R 170/1000/13 Current 3-phase130089
R 50/250/13 1-phase130022
R 50/500/12 1-phase120034

Full specifications

Core Performance & Functional Specifications
Electrical connection 3-phase
Outer tube Ø mfr 170
Heated mfr 1000
Connected mfr 13.7
Outer dimensions (W × D × H) mfr 460 × 628 mm
Dimensions, Weight & Mechanical Design
Weight 89 kg
Length constant1 mfr 330
Length constant1 mfr 500
Tube length mfr 1400
Operating Conditions, Environment & Protection
Max temperature 1300 °C

Description

Construction and series positioning

Thermal behavior

Electrical and control

Integration & Operating Notes

Electrical
Three-phase supply required; confirm site phase configuration

The furnace is specified for 3-phase connection. Before installation, verify that the available supply matches the phase configuration and protective device rating of the unit as delivered; the verified facts do not state voltage or frequency, so these must be taken from the nameplate.

Factory Specification Sheet
Process Limits
Do not exceed 1300 °C at the tube or workload

The maximum temperature of 1300 °C is the upper limit for the furnace and the work tube. Operation above this value risks tube failure and invalidates the thermal specification; the controller setpoint and any over-temperature protection should be configured so the limit cannot be exceeded.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the R 170/1000/13 rather than the R 50/250/13 or R 50/500/12?

Pick the R 170/1000/13 when the workload needs a 170 mm tube bore and a 1000 mm heated length, e.g. larger parts or longer residence in the hot zone. The R 50 siblings have 50 mm bores and 250 or 500 mm heated lengths, suited to small samples.

What supply and adjacent equipment does the R 170/1000/13 require?

It needs a 3-phase supply; voltage and frequency are not stated in the verified facts and must be read from the nameplate. No controller or thermocouple is specified for this model in the supplied documents, so control hardware must be selected separately.

What is included in base delivery and what must be ordered separately?

The verified facts list only the furnace itself; no work tube, controller, thermocouple, gas fittings, or cables are confirmed as included. These must be specified separately, and no maintenance interval is stated in the supplied documents.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF