Nabertherm R 50/250/13
Nabertherm ·Made in Germany · In Active Production

Nabertherm R 50/250/13

Nabertherm R 50/250/13 — Tube furnaces.

The R 50/250/13 is a single-phase compact tube furnace rated to 1300 °C, built around a 50 mm outer-diameter tube with a 250 mm heated length and 450 mm overall tube length. Its 80 mm constant-temperature zone and 1.9 kW connected load distinguish this short-zone modification from longer siblings such as the R 50/500/12 and larger-bore R 170/1000/13. It is intended for small-sample thermal processing where a defined uniform hot zone matters more than chamber volume.

Nabertherm Compact Tube Furnaces up to 1300 °C | Nabertherm Series — Model Comparison & Selection

Model Electrical connectionMax temperature, °CWeight, kg
R 50/250/13 Current 1-phase130022
R 170/1000/13 3-phase130089
R 50/500/12 1-phase120034

Full specifications

Core Performance & Functional Specifications
Electrical connection 1-phase
Outer tube Ø mfr 50
Heated mfr 250
Connected mfr 1.9
Outer dimensions (W × D × H) mfr 340 × 508 mm
Dimensions, Weight & Mechanical Design
Weight 22 kg
Length constant1 mfr 80
Tube length mfr 450
Operating Conditions, Environment & Protection
Max temperature 1300 °C

Description

Construction and series positioning

Thermal behavior

Control and operation

Integration & Operating Notes

Electrical
Single-phase 1.9 kW load must be assigned to a dedicated circuit

The furnace connects to a 1-phase supply with a 1.9 kW connected load. Confirm the site circuit rating and protective device against this load before installation, and keep the supply dedicated so that controller electronics are not shared with high-inrush equipment.

Factory Specification Sheet
Process Limits
Do not exceed 1300 °C at the tube or workload

The 1300 °C maximum temperature is the upper limit for the furnace and its tube assembly. Operation above this value risks tube failure and invalidates the specified thermal behavior; set the controller limit accordingly and verify with an independent thermocouple during first runs.

Factory Specification Sheet
Process Limits
Keep the workload within the 80 mm constant-temperature length

The uniform zone is only 80 mm long inside a 250 mm heated length. Samples or crucibles longer than this zone will see a temperature gradient; center the workload on the constant zone and account for the gradient when designing multi-step thermal profiles.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the R 50/250/13 rather than the R 50/500/12 or the R 170/1000/13?

Pick the R 50/250/13 for small samples needing a defined 80 mm uniform zone at up to 1300 °C in a 50 mm tube. The R 50/500/12 gives a longer heated length but a 1200 °C class; the R 170/1000/13 is for larger-diameter, longer workloads.

What supply and controller arrangement does the 1-phase 1.9 kW furnace need?

It runs on a single-phase supply at 1.9 kW connected load, so size the circuit and protective device to that load. The controller is documented separately (500-series/MyNabertherm); confirm its type and any recorder option at commissioning since no model-specific wiring is printed.

What is not included in base delivery and what must be planned for service?

The supplied documents do not list a tube, controller, thermocouple, or recorder as included, so treat the 50 mm tube and control hardware as items to specify separately. No maintenance interval is printed for this model; service planning must come from the controller and furnace documentation at handover.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF