Shimadzu Altrace
Shimadzu ·Made in Japan · In Active Production

Shimadzu Altrace

Shimadzu Altrace — Elemental analyzers.

The Shimadzu ALTRACE is an energy-dispersive X-ray fluorescence (EDX) elemental analyzer configured with a 48-sample autosampler, contamination-proof cup, and six automatically exchanged filters. It delivers detection limits of 1 ppm for Pb and Cd in aqueous solution (600 s), a five-fold improvement over the EDX-7200, and covers sub-ppm to percent levels in batch analysis. It is intended for automated multi-element screening in production and environmental laboratories.

Full specifications

Core Performance & Functional Specifications
Detection limit (Pb in aqueous solution, 600 seconds measurement time) mfr 1 ppm (Pb in aqueous solution, 600 seconds measurement time)
Detection limit (Pb, EDX-7200 comparison, 600 seconds measurement time) mfr 5 ppm (Pb, EDX-7200 comparison, 600 seconds measurement time)
Detection limit (Cd in aqueous solution, 600 seconds measurement time) mfr 1 ppm (Cd in aqueous solution, 600 seconds measurement time)
Detection limit (Cd, EDX-7200 comparison, 600 seconds measurement time) mfr 5 ppm (Cd, EDX-7200 comparison, 600 seconds measurement time)
Measurement range (batch element analysis) mfr sub-ppm to % (batch element analysis)
Measurement time (detection limit measurements) mfr 600 seconds (detection limit measurements)
Sample replacement mfr 48-sample autosampler
Protective function mfr Contamination-proof cup
Data processor SSD mfr 500 GB min.
Filter #1 energy range (elements Mo,Rh,Pd,Ag,Cd,Sn,Sb) mfr 14 to 38 keV (elements Mo,Rh,Pd,Ag,Cd,Sn,Sb)
Filter #2 energy range (elements S,Cl) mfr 2 to 4 keV (elements S,Cl)
Filter #3 energy range (elements Cr,Mn,Fe,Co,Ni) mfr 5 to 10 keV (elements Cr,Mn,Fe,Co,Ni)
Filter #4 energy range (element Hg) mfr 9 to 10 keV (element Hg)
Filter #5 energy range (elements As,Br,Zr,Hg,Pb,Bi) mfr 9 to 14 keV (elements As,Br,Zr,Hg,Pb,Bi)
Filter #6 energy range (elements Ti,V) mfr 4 to 5 keV (elements Ti,V)
Operating Conditions, Environment & Protection
X-ray generator cooling method mfr Air-cooled (with fan)

Description

Construction and positioning

Behavior under load and in different media

Installation, connection, and control

Integration & Operating Notes

Process Limits
Detection limits are tied to 600 s measurement time

The 1 ppm Pb/Cd detection limits are specified for 600-second acquisitions in aqueous solution. Shorter measurement times will raise the achievable detection limit; methods must budget sufficient count time per element group to meet trace-level requirements.

Factory Specification Sheet
Process Limits
Filter selection must match the element group

Each of the six filters is optimized for a specific energy range (e.g., Filter #2 for S and Cl at 2–4 keV; Filter #5 for As, Br, Zr, Hg, Pb, Bi at 9–14 keV). Using the wrong filter for an element will degrade sensitivity; method setup must assign the correct filter per analyte.

Factory Specification Sheet
Maintenance
Contamination-proof cup protects the sample chamber

Samples are presented in a contamination-proof cup. Inspect and replace cups as needed to prevent spills from reaching the X-ray chamber; the cup is the primary barrier against contamination that could invalidate results or require service.

Document Digest C142-E050
Mounting
Air-cooled generator simplifies siting

The X-ray generator is air-cooled with a fan, so no water chiller or facility cooling loop is required. Ensure adequate clearance around the instrument for airflow and service access; ambient temperature and humidity limits are not specified in the available digest.

Factory Specification Sheet
Control & I/O
Local 500 GB SSD stores methods and data

The data processor includes a 500 GB SSD for methods, spectra, and results. Network or LIMS connectivity is not described in the supplied documentation; plan data transfer via the available ports or manual export.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the ALTRACE instead of the EDX-7200 for trace Pb and Cd screening?

Choose the ALTRACE when 1 ppm detection limits for Pb and Cd (600 s, aqueous) are required; the EDX-7200 specifies 5 ppm under the same conditions. The ALTRACE also adds a 48-sample autosampler for unattended batch runs.

What sample presentation and accessories are needed to run aqueous samples on the ALTRACE?

Aqueous samples are measured in the contamination-proof cup, which is part of the standard configuration. The cup contains the liquid and protects the chamber; no additional consumables are specified in the available documentation.

What are the duty-cycle and environmental limits for continuous batch operation?

The generator is air-cooled, so continuous operation depends on adequate airflow and ambient conditions; specific duty-cycle and temperature limits are not stated in the supplied digest. The 48-sample autosampler supports extended unattended runs.

What maintenance is required for the autosampler and sample cups, and what is not included in base delivery?

Inspect and replace contamination-proof cups as needed to prevent chamber contamination. The base delivery includes the 48-sample autosampler and six filters; spare cups, calibration standards, and any external data storage are not listed and should be ordered separately.

Dimensional Drawings & Technical Documentation

Dimensional drawings

performance curve

Click drawing to inspect vector dimensions

Technical documentation

PDF
C142-E050
Datasheet ·2,2 МБ ·12 pp.
View PDF