Shimadzu MCE 301
Shimadzu ·Made in Japan · In Active Production

Shimadzu MCE 301

Shimadzu MCE 301 — Life science instruments.

The Shimadzu MCE 301 is a microchip electrophoresis system for DNA and RNA fragment analysis, using a single-channel microchip format. It delivers size resolution from 5 bp (25–100 bp) to 20% (1,000–12,000 bp) and quantitative ranges of 0.5–50 ng/µL for DNA, with a high-sensitivity mode extending to 10–1,000 pg/µL. It is intended for laboratories requiring rapid, automated electrophoretic separation and quantitation of nucleic acids.

Full specifications

Core Performance & Functional Specifications
Model (MultiNA II) mfr MCE-301 (MultiNA II)
Sample rack capacity (removable sample rack) mfr 96 plate (removable sample rack)
Maximum samples added during analysis mfr 120 samples
Automatic dilution levels (up to 48 samples) mfr 5, 10, 20 fold (up to 48 samples)
Analysis start time after preparation mfr 10 minutes
Purified water consumption for rinsing (vs previous model) mfr 75 % of previous model (vs previous model)
Microchip mfr 292-36010-41 P/N
Microchip Cleaning Kit mfr 292-35925-91 P/N
Product name mfr DNA-12000 Marker solution
Supplier mfr Shimadzu Corporation
GHS classification mfr Reproductive toxicity Category 1B
Signal word mfr DANGER
Hazard statement mfr H360: May damage fertility or the unborn child
tris(hydroxymethyl)aminomethane content (CAS No. 77-86-1) mfr < 1.0 % (CAS No. 77-86-1)
boric acid content (CAS No. 10043-35-3) mfr < 1.0 % (CAS No. 10043-35-3)
Water content (CAS No. 7732-18-5) mfr Balance to 100 % (CAS No. 7732-18-5)
Other non-hazardous components mfr < 0.1 %
Eye contact first aid mfr Flush eyes with plenty of water for at least 15
Transport classification (US DOT, IMDG (sea), ADR/RID (land), ICAO/IATA (air)) mfr No classification (US DOT, IMDG (sea), ADR/RID (land), ICAO/IATA (air))
Use of the product mfr For analytical research use only. Not applicable
Other non-hazardous components content mfr < 0.1 %
Substance/mixture mfr Mixture
tris(hydroxymethyl)aminomethane (CAS No. 77-86-1) mfr < 1.0 %
boric acid (CAS No. 10043-35-3) mfr < 1.0 %
Water (CAS No. 7732-18-5) mfr Balance to 100 %
Dimensions, Weight & Mechanical Design
Footprint (vs previous model) mfr 15 % smaller (vs previous model)
Height (vs previous model, with front door open) mfr 27 % shorter (vs previous model, with front door open)
Electrical, Power & Drive Specifications
Power consumption (vs previous model) mfr 70 % of previous model (vs previous model)
Materials, Media & Process Compatibility
Suitable extinguishing media mfr water mist, foam, powder, carbon dioxide, dry sa

Description

Construction and positioning

The MCE 301 is a benchtop microchip electrophoresis instrument measuring 375 mm (W) × 452 mm (H) × 520 mm (D) and weighing 39.0 kg. It operates from a single-phase 100–240 V AC, 50/60 Hz supply drawing up to 300 VA. As a microchip-based system, it replaces conventional slab-gel or capillary electrophoresis for size-based nucleic acid analysis, offering a compact footprint and automated operation. ### Performance characteristics

No PDF digests or manual excerpts were supplied. Therefore, specific installation, connection, control, and operational details (e.g., interface types, chip handling, reagent kits, maintenance procedures) cannot be described. The instrument requires a standard single-phase AC supply and bench space adequate for its dimensions and weight.

Integration & Operating Notes

Electrical
Verify supply can deliver 300 VA continuously

The MCE 301 draws up to 300 VA at 100–240 V AC, 50/60 Hz. Ensure the branch circuit and any UPS or power conditioner are rated for this apparent power plus margin, especially if other instruments share the circuit. Undersized supply may cause voltage drops or breaker trips during operation.

Factory Specification Sheet
Process Limits
Select kit matching fragment size and sensitivity

Sizing accuracy and quantitative range depend on the kit: DNA-500 for 25–500 bp with ±5 bp/±5% accuracy; DNA-1000, DNA-12000, or DNA-HS12000 for longer fragments with ±15% accuracy. High-sensitivity DNA analysis requires the HS kit and covers 10–1,000 pg/µL. Using the wrong kit may yield out-of-spec results.

Factory Specification Sheet

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
c297-e157
Datasheet ·2,8 МБ ·12 pp.
View PDF
PDF
Safety Data Sheet (DNA-1000 Marker solution)
Datasheet ·199,1 КБ ·3 pp.
View PDF
PDF
Safety Data Sheet (DNA-500 Marker solution)
Manual ·171,8 КБ ·3 pp.
View PDF
PDF
Safety Data Sheet (DNA-2500 Marker solution)
Datasheet ·199,1 КБ ·3 pp.
View PDF
PDF
Safety Data Sheet (DNA-12000 Marker solution)
Datasheet ·198,9 КБ ·3 pp.
View PDF