Shimadzu TOC 4200
Shimadzu ·Made in Japan · In Active Production

Shimadzu TOC 4200

Shimadzu TOC 4200 — Gas analyzers.

The Shimadzu TOC 4200 is a wall-mounted online total organic carbon analyzer using 680°C combustion catalytic oxidation with NDIR detection. It measures TC and NPOC (optional IC, POC, TOC, TN) over a range of 0–5 to 0–1,000 mgC/L full scale, extendable to 20,000 mgC/L with internal dilution. Designed for continuous monitoring in industrial and environmental water systems, it provides analog and contact outputs for integration with plant control.

Full specifications

Core Performance & Functional Specifications
Measurement range 0 - 5 to 0 - 1,000 mgC/L f.s. (0 to 20,000 mgC/L f.s. with dilution function) From
High-sensitivity measurement range (TOC-4200, optional) mfr 0 to 1 mgC/L (TOC-4200, optional)
Number of flow lines (multi-stream sample switching unit) mfr up to six flow lines (multi-stream sample switching unit)
Measuring cycle (short measuring cycle) mfr 4 minutes (short measuring cycle)
Maintenance space (external dimensions) mfr over 500 mm (external dimensions)
Data storage function mfr 20,000 past
Dimensions mfr 550 x
Construction mfr Indoor wall mounting (optional stand available)
Carrier gas mfr 4
Communication function mfr -485 RS
Contact input mfr 1 to 6 halt
Analog output mfr 4
Printer mfr 40 characters
Recorder mfr 100 mm
Data storage device mfr 3
EPA TOC removal rate calculation function mfr 40 CFR
Measurement principle mfr 680
Load calculation function mfr 100 ohms
Conversion function mfr Conversion with a linear expression using requir
Stream switching function mfr 1 to 6 can
Automatic calibration function mfr 5
Sample dilution function mfr 2 to 50 Dilution
IC removal method mfr Acidify/sparge within syringe
Sample injection method mfr Syringe pump/sliding injection port
Measurement cycle mfr 4 minutes
Zero stability mfr 2 %
Span stability mfr 2 %
Repeatability mfr 2 %
Dimensions, Weight & Mechanical Design
Width (external dimensions) mfr 550 mm (external dimensions)
Depth (external dimensions) mfr 388 mm (external dimensions)
Height (external dimensions) mfr 214 mm (external dimensions)
Weight mfr 70 kg
Electrical, Power & Drive Specifications
Power supply mfr 100 to 240 V
Interfaces, Connections & Control
Contact output signal mfr 2 A
Display, operation mfr Color LCD with touch screen
Standards, Safety & General Data
Dilution factor (TOC-4200, standard dilution function) mfr up to 50x (TOC-4200, standard dilution function)

Description

Construction and positioning

Integration & Operating Notes

Electrical
Power supply must handle 10 A at 100–240 V AC

The analyzer draws up to 10 A at 100–240 V AC ±10%, 50/60 Hz. Ensure the circuit and wiring are rated for this current and that a suitable disconnect device is provided. Voltage fluctuations beyond ±10% may affect performance.

Factory Specification Sheet
Process Limits
Carrier gas supply pressure must be maintained at 250–300 kPa

Use pressurized air, high-purity air, or oxygen (or optional high-purity nitrogen) with a supply pressure of 250–300 kPa. Pressure outside this range can cause incomplete combustion or detector noise, invalidating measurements.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the TOC 4200 instead of a sibling model with more measurement capabilities?

Choose the TOC 4200 if you need standard TC and NPOC monitoring with the option to add IC, POC, TOC, or TN later. If you require simultaneous TN or IC measurement out of the box, consider a higher-tier model in the series that includes those as standard.

What are the requirements for connecting the TOC 4200 to a plant control system?

The analyzer offers RS-485, RS-232C (option), and Modbus communication. For analog signals, select 4–20 mA or 0–16 mA DC isolated outputs (load ≤500 Ω). Contact inputs need dry contacts rated ≥1.4 V DC, 10 mA. Ensure proper grounding and cable shielding.

What maintenance items and accessories are not included with the base unit?

The base delivery includes the analyzer but not the optional stand, printer, recorder, or USB memory. Calibration standards, carrier gas regulators, and consumables like combustion tubes and catalysts are not included. Regular maintenance kits are available separately.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
c391-e083
Datasheet ·2,5 МБ ·16 pp.
View PDF
PDF
c10g-e093
Datasheet ·5,7 МБ ·24 pp.
View PDF