Waters BioAccord LC-MS System
Waters BioAccord LC-MS System — Mass spectrometers.
The BioAccord LC-MS System is an integrated liquid chromatography–mass spectrometry platform combining a binary solvent manager, sample manager, column manager, and a quadrupole time-of-flight mass spectrometer. It delivers intact mass accuracy within 20 ppm and peptide mapping sequence coverage over 87%, with deconvoluted intensity reproducibility below 5% RSD. Designed for biopharmaceutical characterization, it supports intact mass analysis and peptide mapping across a 25–2,500 ng concentration range.
Direct drop-in replacements
Full specifications
| Deconvoluted intensity reproducibility mfr | <5% RSD |
| Concentration range mfr | 25 ng to 2,500 ng |
| Sequence coverage (peptide mapping) mfr | over 87% |
| Mass accuracy (intact mass) mfr | within 20 ppm |
| Mass precision mfr | <5 ppm |
| Precursor mass accuracy (peptide mapping) mfr | <10 ppm |
Description
System Architecture and Positioning
The BioAccord LC-MS System is a fully integrated LC-MS platform that bundles a binary solvent manager, sample manager, column manager, and a QToF mass spectrometer into a single controlled system. Unlike modular LC-MS configurations that require user assembly and tuning, this system is factory-integrated and calibrated for biopharmaceutical workflows. ### Performance Under Analytical Conditions
- Intact mass analysis achieves mass accuracy within 20 ppm and mass precision below 5 ppm, enabling confident identification of protein variants. - Deconvoluted intensity reproducibility is under 5% RSD, supporting comparative intact mass analysis. - Peptide mapping delivers sequence coverage over 87% with precursor mass accuracy below 10 ppm, suitable for primary structure confirmation. - The system operates over a concentration range of 25 ng to 2,500 ng, accommodating both low-abundance and concentrated samples. The system is intended for benchtop laboratory use and requires standard laboratory utilities (electrical, gas, and solvent supply), but exact requirements must be confirmed with the manufacturer’s site preparation guide.
Integration & Operating Notes
Operating outside this range may compromise mass accuracy and reproducibility; samples outside the range should be diluted or concentrated and re-analyzed to ensure valid results.
To maintain mass accuracy within 20 ppm and reproducibility below 5% RSD, schedule routine calibration and system suitability checks as per the manufacturer’s recommendations; failure to do so may invalidate results.
The system requires stable electrical power and high-purity nitrogen for the mass spectrometer; consult the site preparation guide for exact voltage, current, and gas specifications to avoid installation delays.
Selection & Integration Q&A
Choose BioAccord for an integrated, factory-calibrated system that simplifies biopharmaceutical intact mass and peptide mapping workflows. Modular systems offer flexibility but require user assembly and tuning, which can introduce variability.
The BioAccord is a fully integrated LC-MS system that includes its own LC components; it is not designed to connect to an external LC. Ensure your laboratory has appropriate electrical, gas, and solvent supplies as specified in the site preparation guide.
The base system includes the instrument and software, but consumables such as columns, solvents, and calibration standards are not included. Regular maintenance includes cleaning the ion source and replacing filters; refer to the maintenance schedule in the manual.