Waters Xevo TQ-XS Triple Quadrupole Mass Spectrometer
Waters Xevo TQ-XS Triple Quadrupole Mass Spectrometer — Mass spectrometers.
The Xevo TQ-XS is a triple quadrupole mass spectrometer with two high-resolution quadrupole analyzers (MS1/MS2), a T-Wave collision cell, and a StepWave XS ion transfer optic. It covers a mass range of 2 to 2048 m/z and achieves MRM speeds of 500 transitions per second, distinguishing it within the series by its standard tool-free ESI/APCI/ESCi multi-mode source. It is used for targeted quantitation in pharmaceutical, clinical, and environmental laboratories.
Direct drop-in replacements
Full specifications
| Detector types | Low-noise, off-axis, long-life photomultiplier XDR detector |
| Ion source | Multi-mode source – tool free ESI/APCI/ESCi (standard); UniSpray ion source (optional); Tool-free APCI probe (optional); nanoFlow ESI source (optional); ASAP (optional); APGC ion source (optional); ionKey source (optional) |
| Collision cell mfr | T-Wave enabled; Software programmable gas contro |
| Vacuum system mfr | Three air-cooled turbomolecular vacuum pumps; On |
| Regulatory approvals/marks mfr | CE, CB, NRTL (CAN/US), RCM |
| MRM speed mfr | 500 MRM/sec |
| Ion source transfer optics mfr | StepWave XS |
| Mass range | 2 to 2048 m/z |
| Height | 70.7 cm |
| Width | 61.0 cm |
| Depth mfr | 99.5 cm (39.0 in.) |
| Mass analyzer mfr | Two high-resolution, high-stability quadrupole a |
Description
Construction and architecture
- Dual quadrupole analyzers with pre-filters for high resolution and stability; T-Wave collision cell with software-programmable gas control. - StepWave XS ion transfer optics for efficient ion transmission; low-noise, off-axis photomultiplier XDR detector. - Vacuum system: three air-cooled turbomolecular pumps backed by one vacuum backing pump. - Standard multi-mode source supports tool-free ESI, APCI, and ESCI; optional sources include UniSpray, APCI probe, nanoFlow ESI, ASAP, APGC, and ionKey. ### Behavior under load
- Mass range of 2 to 2048 m/z allows analysis of small molecules and peptides. - MRM speed of 500 MRM/sec supports high-throughput targeted quantitation. ### Installation and operation
- Bench-top unit with dimensions 70.7 cm (H) x 61.0 cm (W) x 99.5 cm (D); requires adequate bench space and ventilation. - Regulatory approvals: CE, CB, NRTL (CAN/US), RCM.
Integration & Operating Notes
The instrument measures 70.7 cm high, 61.0 cm wide, and 99.5 cm deep, and uses air-cooled turbomolecular pumps; ensure the bench can support the weight and that clearance allows adequate airflow for cooling.
The Xevo TQ-XS carries CE, CB, NRTL (CAN/US), and RCM marks, indicating compliance with regional electrical safety standards; confirm that the available supply matches the instrument's voltage and current requirements before installation.
Ions outside this range are not transmitted or detected; method development must ensure all target analytes and their fragments fall within 2 to 2048 m/z to avoid invalid results.
Selection & Integration Q&A
Choose the Xevo TQ-XS when you need high MRM speed (500 MRM/sec) and a mass range up to 2048 m/z with the standard tool-free ESI/APCI/ESCi source. For specialized ionization like nanoFlow or APGC, consider models with those options pre-configured.
The standard multi-mode source accepts tool-free ESI/APCI/ESCi probes, so the LC outlet connects directly to the source. Ensure the LC flow rate and mobile phase are compatible with the chosen ionization mode; for other sources like UniSpray or APGC, additional hardware is required.
The base delivery includes the standard multi-mode source (ESI/APCI/ESCi). Optional sources (UniSpray, nanoFlow ESI, ASAP, APGC, ionKey) and the tool-free APCI probe are not included. Consumables such as LC columns, solvents, and calibration standards are also not part of the base package.