Induztr
Engineering Digest Document Viewer Related Models

Agilent Atomic Absorption Spectrometers

Contents

  1. Overview pp. 1-2
    Introduction to Agilent AA spectrometer product line and benefits
  2. Config p. 3
    Comparison table to choose instrument for application
  3. Overview pp. 4-5
    High-speed flame AA capabilities and performance
  4. Overview pp. 6-8
    Sensitive furnace AA, automation, and sensitivity enhancement
  5. Overview p. 9
    Software features to simplify analysis
  6. Config p. 10
    Accessories for various analysis challenges
  7. Services p. 11
    Service and consumables offerings
  8. Services p. 12
    Agilent CrossLab support and insights
  9. p. 3 table, 3 rows

Which instrument will suit your application?

EnvironmentalFood and AgricultureChemical and PetrochemicalMaterials and MiningPharmaceutical
FS Flame AA 240FS + SIPS, 280FS + SIPSDetermination of Mg, Ca, and K in brines (SIPS accessory provides automated calibration and online sample dilution)Analysis of Cr in soils and solid wastes Major elements Ca, Cu, Fe, Mg, Na and Zn in food, beverage, and agricultural samples Cations and nutrients in soilsNa and K in FAME (fatty acid methyl esters) Pb and Mn in unleaded gasoline Ca, Cr, Cu, Fe, K, Mg, and Na in plating solutionsAu, Ag, and Pt group elements in ore grade materialCu in traditional Chinese medicines
Vapor Generation AA 240FS/280FS AA + VGA 77As, Hg, and Sb in coal fly ash As, Sb, and Se in sediments Hg in waters, effluent, etc. (US EPA method 245.1)Hg and As in fish and sea foods Trace As and Sb levels in plant materialsHg in electronics and plastics (WEEE/RoHs) As and Sb in zinc plating solutionsHg and As in raw materials used in the production of pharma components
Zeeman GFAA 240Z AA, 280Z AAToxic elements in waters (GB/T5750, US EPA method 200.9,) Toxic and Heavy metals Be, Pb and Cd in soils and sediments (HJ and GB/T Methods) Cd, Cu, Pb, Co, and Ni in marine invertebratesPb in soy sauce following GB 2762 Pb and Cd in fish, sea foods, and plant Determination of Cd, Cr, Ni and Pb in Grains Cu, Fe, and Ni in edible oilsNi, V, Fe, and Na in crude oils Trace elements in heavy, industrial fuel oils Trace elements in high purity sulfuric acid or Na, Ca, and Si in pure process water Al and Fe in paperPb and Cd in consumer goods, toys, jewelry Pb, Cd, and Cr in electronics and plastics (WEEE/RoHs) Trace metals in high purity copperAnalysis of Cd, and Pb impurities in pharmaceutical substances

Engineering Facts

14 facts · every claim linked to a page
Selection

The 240 FS is a four-lamp flame/vapor system with Fast Sequential mode, suited to budget-sensitive routine labs.

Determines whether this model covers the lab's routine multi-element flame workload within budget.

Source
“The Agilent 240 FS is designed for routine flame/vapor analyses for budget-sensitive labs.”
Selection

The 240Z uses transverse Zeeman GFAA correction and four lamps, targeting routine trace-level analyses.

Confirms suitability for trace-level furnace work where background correction quality is decisive.

Source
“The Agilent 240Z Zeeman Graphite Furnace AA (GFAA) with Transverse Zeeman background correction provides the most uniform and accurate correction for even your toughest samples.”
Selection

The Duo configuration pairs one flame and one furnace AA under a single computer to avoid changeover downtime.

Guides choice when the lab must handle both flame and furnace samples without swapping atomizers.

Source
“The Agilent Duo system features two instruments: one flame AA and one graphite furnace AA, controlled by one computer.”
Selection

The 280FS combines eight lamps with Fast Sequential mode for high-throughput flame labs.

Justifies the higher model when throughput and lamp capacity are the deciding criteria.

Source
“The Agilent 280FS is a high performance flame atomic absorption spectrometer. It combines eight lamps with Agilent’s patented Fast Sequential mode, doubling sample throughout and dramatically reducing running costs.”
Selection

The 280Z is specified for labs needing the lowest detection limits with eight lamps and transverse Zeeman correction.

Directs selection toward the 280Z when ppb-level detection limits are mandatory.

Source
“The Agilent 280Z GFAA features Transverse Zeeman background correction, a high specification optical system, and eight lamps. The instrument is designed for laboratories needing the lowest detection limits.”
Performance

Fast Sequential mode measures all elements from a single aspiration, cutting sample consumption and analysis time.

Explains the productivity and sample-consumption benefit that justifies FS over conventional AA.

Source
“Determine the concentration of all elements from a single aspiration of each sample”
Performance

PROMT combined with Fast Sequential mode reduces gas consumption and analysis time by over 60%.

Quantifies operating-cost savings relevant to running-cost calculations during selection.

Source
“When combined with Fast Sequential mode, gas consumption and analysis time reduced by over 60%”
Performance

Transverse Zeeman correction with three-point polynomial interpolation gives an 11-fold improvement in correction accuracy.

Supports method validation and selection for matrices with structured or high background absorbance.

Source
“Agilent Zeeman systems use three point polynomial interpolations to accurately track the background signal, resulting in an 11-fold improvement in correction accuracy.”
Compliance

Zeeman background correction is accepted by environmental agencies such as the US EPA for regulated analyses.

Confirms regulatory acceptability of the correction technique for environmental compliance work.

Source
“Environmental agencies (such as the US EPA) accept Zeeman background correction as the most effective background correction technique for regulated environmental analyses.”
Operation

The PSD120 autosampler holds up to 130 solutions and prepares calibration standards from a single bulk standard.

Informs bench space planning and calibration workflow design for furnace operation.

Source
“The PSD120 furnace autosampler (with capacity for up to 130 solutions), automatically prepares and delivers calibration standards from a single bulk standard.”
Operation

Tube-CAM video monitoring lets the operator inspect the graphite tube in real time to set drying, ashing, and dispensing height.

Affects method setup and troubleshooting practice during furnace installation and commissioning.

Source
“The Tube-CAM video monitoring lets you see inside the graphite tube, in real time.”
Performance

UltrAA lamps raise sensitivity by up to 40% and typically exceed 8000 mA hours of operation.

Influences lamp selection and consumable lifetime planning for demanding applications.

Source
“The sharper emission profile of the UltrAA lamp reduces self-absorption and line broadening, enhancing sensitivity by up to 40%”
Operation

SIPS performs over-range dilutions up to 200x with less than 2% error automatically.

Determines whether manual dilution steps can be eliminated and how much sample prep automation is needed.

Source
“performing over-range dilutions up to 200x with less than 2% error”
Performance

The Mark 7 atomization system, standard on 280 FS, achieves typically > 0.9 Abs from 5 mg/L Cu and < 0.5% RSD.

Provides acceptance criteria for flame performance verification at installation.

Source
“Achieve high sensitivity—typically > 0.9 Abs. from 5 mg/L Cu”