HiPace 700 with TC 400 — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Pfeiffer Vacuum HiPace 700 turbomolecular vacuum pump (single model datasheet/brochure, dated 15.09.2025). Covers standard features (RS-485 and remote interfaces, DN 160 ISO-K/ISO-F/CF-F inlet), plus listed accessories/options: electrical adapter, mains cable, connecting cable, various fieldbus systems, power supply kit and display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper. No ordering codes given.
Section-by-Section Technical Breakdown
Positions the HiPace 700 as a high-performance turbomolecular pump with optimized rotor geometry for enhanced gas load handling, high gas throughput and pumping speed, high compression for light gases, and compatibility with various backing pumps. Reliability is attributed to best-in-class hybrid bearing technology with superior bearing lubrication for long life cycle. A list of available accessories, spare parts and options is provided.
- Optimized rotor geometry with enhanced gas load handling
- High gas throughput and high pumping speed
- High compression for light gases; compatible with a variety of backing pumps
- Hybrid bearing technology with superior bearing lubrication for long life cycle
- Accessories/options: electrical adapter, mains cable, connecting cable, various fieldbus systems, power supply kit and display unit, mounting kit, safety valve, venting accessories, power failure venting unit, vibration damper
Key performance figures: pumping speeds for N2, H2, He and Ar; compression ratios; gas throughput at final rotational speed; maximum forevacuum pressure for N2. Additional general data: run-up time, sound pressure level and weight.
- Pumping speed: N2 685 l/s, H2 555 l/s, He 655 l/s, Ar 665 l/s
- Compression ratio: N2 1·10^11, H2 4·10^5, He 3·10^7, Ar 1·10^11
- Gas throughput at final rotational speed: N2 6.5 hPa·l/s, H2 14 hPa·l/s, He 20 hPa·l/s, Ar 3.5 hPa·l/s
- Max. forevacuum pressure (N2): 11 hPa
- Run-up time: 4 min; sound pressure level 50 dBA (EN ISO 2151); weight approx. 11.5 kg
Standard communication interfaces are RS-485 and remote; the pump may be mounted in any orientation. Gas inlet and outlet connections are specified (DN 160 flange inlet, DN 25 ISO-KF or G 1/4" outlet).
- Communication interfaces (standard): RS-485, remote
- Mounting orientation: arbitrary
- Gas inlet: DN 160 ISO-K / ISO-F / CF-F
- Gas outlet: DN 25 ISO-KF / G 1/4"
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Applies To |
|---|---|---|
| Pumping speed for N2 is 685 l/s (H2 555 l/s, He 655 l/s, Ar 665 l/s). p.2 ↗ | Use the N2 value for general sizing; note the ~19% drop for H2 when sizing hydrogen processes. | HiPace 700 |
| Compression ratio for H2 is only 4·10^5, vs. 1·10^11 for N2 and Ar. p.2 ↗ | Ultimate pressure in hydrogen-containing systems is strongly limited by backing pressure; select an effective backing pump to reach low H2 partial pressures. | HiPace 700 |
| Maximum forevacuum pressure for N2 is 11 hPa. p.2 ↗ | Backing pump and its pipe sizing must keep foreline pressure below 11 hPa at full gas load to avoid loss of pumping performance. | HiPace 700 |
| Gas throughput at final rotational speed reaches 20 hPa·l/s for He and 14 hPa·l/s for H2, but only 6.5 hPa·l/s for N2 and 3.5 hPa·l/s for Ar. p.2 ↗ | The pump handles light-gas loads (He/H2) better than heavy gases; match backing pump capacity to the actual process gas throughput. | HiPace 700 |
| Run-up time to final rotational speed is 4 minutes. p.2 ↗ | Process start sequences and interlocks (e.g., open inlet only near full speed) should account for the 4-min spin-up period. | HiPace 700 |
| Gas inlet flange is DN 160 ISO-K/ISO-F/CF-F; outlet is DN 25 ISO-KF or G 1/4". p.3 ↗ | Choose matching inlet flange hardware (KF/CF clamps and seals) and ensure the small DN 25 foreline does not throttle backing flow at high gas throughput. | HiPace 700 |
| Mounting orientation is arbitrary. p.3 ↗ | The pump can be installed horizontally or vertically, simplifying integration into tight layouts; no dedicated orientation constraints need to be designed in. | HiPace 700 |
| Standard communication interfaces are RS-485 and remote. p.3 ↗ | Fieldbus options must be added as accessories if PLC fieldbus connectivity (e.g. Profibus/Ethernet variants) is required; RS-485 is the default serial interface. | HiPace 700 |
| Sound pressure level is 50 dBA per EN ISO 2151. p.2 ↗ | Low noise level permits installation near workstations without special acoustic enclosures. | HiPace 700 |
| Weight is approximately 11.5 kg. p.2 ↗ | Support brackets and mounting kits must be rated for ~11.5 kg plus attached flange hardware; handling does not require lifting equipment. | HiPace 700 |
| Hybrid bearing technology with superior bearing lubrication is used for long life cycle. p.1 ↗ | Hybrid (magnetic/grease-lubricated) bearings reduce oil-related contamination risk versus full oil-lubricated turbos; maintenance planning should follow Pfeiffer's hybrid-bearing service intervals. | HiPace 700 |
| A power failure venting unit and venting accessories are available as options, plus a safety valve. p.1 ↗ | For fail-safe venting on power loss (protecting process/chamber), order the venting unit option; a safety valve should be included where foreline overpressure protection is needed. | HiPace 700 |
| A vibration damper is offered as an accessory. p.1 ↗ | Install the vibration damper when the pump is rigidly flanged to sensitive vacuum chambers or precision instrumentation to decouple rotor vibrations. | HiPace 700 |