HiPace 300 P with TC 400 — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Pfeiffer Vacuum HiPace 300 P turbomolecular vacuum pump, a single high-performance variant designed for coating processes with optimized rotor/stator concept. Covers available accessories, spare parts and options (power supply kit, display unit, venting, safety valve, vibration damper, fieldbus interfaces).
Section-by-Section Technical Breakdown
Introduces the HiPace 300 P as a high-performance turbomolecular pump specially designed for coating processes with an optimized rotor/stator concept. Emphasizes reliability via hybrid bearing technology and ease of maintenance including on-site bearing change and dust insensitivity.
- High performance: designed for coating processes, optimized rotor/stator concept
- Reliable: best-in-class hybrid bearing technology, long life cycle, maximum uptime
- Easy maintenance: on-site bearing change possible, insensitive to process dust
Lists available accessories and options that can be ordered with the HiPace 300 P, covering electrical connections, fieldbus communication, venting, mounting, and vibration isolation.
- Electrical adapter
- Mains cable
- Connecting cable
- Various fieldbus systems
- Power supply kit and display unit
- Mounting kit
- Safety valve
- Venting accessories
- Power failure venting unit
- Vibration damper
Key performance and physical data for the HiPace 300 P, including pumping speeds, compression ratios, gas throughput, run-up time, interfaces, flange connections and weight.
- Pumping speed: N₂ 245 l/s, H₂ 125 l/s, He 220 l/s, Ar 250 l/s
- Compression ratio: N₂ 1·10⁶, H₂ 3·10², He 2.2·10³, Ar 1·10⁷
- Gas throughput at final rotational speed: N₂ 17 hPa·l/s, H₂ 50 hPa·l/s, He 20 hPa·l/s, Ar 4.4 hPa·l/s
- Max. forevacuum pressure for N₂: 1 hPa
- Run-up time: 1.2 min
- Communication interfaces standard: RS-485, remote
- Mounting orientation: arbitrary
- Gas inlet / outlet: DN 100 ISO-K/ISO-F/CF-F / DN 16 ISO-KF / G 1/4"
- Sound pressure level (EN ISO 2151): 50 dBA
- Weight approx.: 6.4 kg
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Applies To |
|---|---|---|
| Pumping speed is 245 l/s for N₂, 250 l/s for Ar, 220 l/s for He and 125 l/s for H₂. p.2 ↗ | Size backing pumps and process timelines using the gas-specific values rather than a single nominal figure; heavy gases (Ar) achieve the highest speed. | HiPace 300 P |
| Compression ratio is 1·10⁶ for N₂, 1·10⁷ for Ar, 2.2·10³ for He and only 3·10² for H₂. p.2 ↗ | Ultimate pressure for light gases (H₂) is strongly limited by backing pressure; a low backing pressure is essential for hydrogen-sensitive vacuum processes. | HiPace 300 P |
| Maximum permissible forevacuum pressure is 1 hPa (for N₂). p.2 ↗ | The backing pump must maintain ≤1 hPa at the foreline to operate safely; select a backing pump with adequate capacity at this level. | HiPace 300 P |
| Gas throughput at final rotational speed: 17 hPa·l/s (N₂), 50 hPa·l/s (H₂), 20 hPa·l/s (He), 4.4 hPa·l/s (Ar). p.2 ↗ | Defines the maximum permissible process gas load before the pump stalls out of its operating range; size gas flow in coating processes accordingly. | HiPace 300 P |
| Run-up time to final rotational speed is 1.2 min. p.2 ↗ | Process start can begin shortly after power-on; suitable for cyclic/short coating runs. | HiPace 300 P |
| Gas inlet flange is DN 100 ISO-K/ISO-F/CF-F; outlet is DN 16 ISO-KF or G 1/4". p.3 ↗ | Select mating flange components and foreline hardware matching these connections; CF-F option supports high-vacuum metal-sealed applications. | HiPace 300 P |
| Mounting orientation is arbitrary. p.3 ↗ | The pump can be installed in any orientation, simplifying integration into coating chambers with constrained layouts. | HiPace 300 P |
| Standard communication interfaces are RS-485 and remote. p.3 ↗ | Integrates into pump control/monitoring via RS-485; additional fieldbus systems are available as options. | HiPace 300 P |
| Sound pressure level is 50 dBA per EN ISO 2151. p.2 ↗ | Low noise allows installation close to operators without special acoustic enclosure in most labs. | HiPace 300 P |
| Approximate weight is 6.4 kg. p.2 ↗ | Light enough for single-person handling and for mounting on chamber flanges without extra structural support; verify with vibration damper accessory. | HiPace 300 P |
| Hybrid bearing technology with on-site bearing change capability and insensitivity to process dust. p.1 ↗ | Bearing maintenance can be performed in situ without removing the pump from the system, reducing downtime in dusty coating processes. | HiPace 300 P |
| A power failure venting unit and venting accessories are available as options, along with a safety valve. p.1 ↗ | For process safety, specify the power failure venting unit to automatically vent the chamber on power loss; safety valve protects against overpressure events. | HiPace 300 P |
| A vibration damper is offered as an accessory. p.1 ↗ | Use between pump and chamber to decouple vibration when precision coating or sensitive instrumentation is involved. | HiPace 300 P |
| The optimized rotor/stator concept is specifically designed for coating processes. p.1 ↗ | Preferred selection for PVD/sputtering-style applications compared to general-purpose turbopumps of similar size. | HiPace 300 P |