HiPace 10 Neo — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Pfeiffer Vacuum HiPace 10 Neo turbomolecular vacuum pump datasheet. Single compact model; document lists available accessories/options: electrical adapter, mains cable, connecting cable, CIP adapter, power supply kit and display unit, pressure sensor, mounting kit, safety valve, venting accessories, power failure venting unit. No ordering codes given.
Section-by-Section Technical Breakdown
Highlights the HiPace 10 Neo as the smallest turbomolecular pump on the market, robust thanks to mechanical (ball) bearings, and designed for flexible, portable/mobile use. Automatic accessory detection is supported. A list of available accessories and options is provided.
- Smallest turbomolecular vacuum pump on the market (compact)
- Most robust turbomolecular pump on the market thanks to mechanical bearings
- Automatic accessory detection; specially designed for mobile/portable use
- Accessories/options: electrical adapter, mains cable, connecting cable, CIP adapter, power supply kit and display unit, pressure sensor, mounting kit, safety valve, venting accessories, power failure venting unit
Key performance data: pumping speeds, compression ratios, ultimate pressure, run-up time, interfaces, noise, and protection class. Ball bearing construction and a maximum N₂ forevacuum pressure of 25 hPa are specified.
- Pumping speed: Ar 13 l/s, N₂ 12 l/s, He 6.5 l/s, H₂ 4 l/s
- Compression ratio: Ar 2.5·10⁷, N₂ 3·10⁶, He 3·10³, H₂ 3·10²
- Ultimate pressure: 5·10⁻⁵ hPa (mbar)
- Run-up time: 45 s
- I/O interfaces: RS485, remote
- Sound pressure level (EN ISO 2151): <50 dB(A)
- Protection class: IP20 type 1
- Input voltage: 24 V DC (±10%)
- Forevacuum max. for N₂: 25 hPa (mbar)
- Bearing: ball bearing (mechanical)
Physical dimensions, weight, rotational speed and mounting orientation information for installation planning.
- Dimensions (L x W x H): 83.4 x 55 x 186 mm
- Weight: 1.3 kg
- Rotational speed: 90,000 min⁻¹ (±2%), variable 50–100%
- Mounting orientation: arbitrary
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Applies To |
|---|---|---|
| Input voltage is 24 V DC with ±10% tolerance. p.2 ↗ | Power supply design must deliver 21.6–26.4 V DC; optional power supply kit is available for mains operation. | HiPace 10 Neo |
| Pumping speeds: 12 l/s (N₂), 13 l/s (Ar), 6.5 l/s (He), 4 l/s (H₂). p.2 ↗ | Suitable only for small-chamber or analytical applications; size backing pump and conductance accordingly. | HiPace 10 Neo |
| Ultimate pressure is 5·10⁻⁵ hPa. p.2 ↗ | Defines the achievable base pressure limit for system design. | HiPace 10 Neo |
| Compression ratios: N₂ 3·10⁶, Ar 2.5·10⁷, He 3·10³, H₂ 3·10². p.2 ↗ | Light gases (H₂, He) have low compression; for hydrogen-bearing processes a good backing pressure is essential. | HiPace 10 Neo |
| Maximum permissible forevacuum pressure for N₂ is 25 hPa. p.2 ↗ | Backing pump must maintain foreline pressure below 25 hPa at full gas throughput to avoid pump overload. | HiPace 10 Neo |
| Run-up time is 45 s. p.2 ↗ | Process start sequences should account for ~45 s before full pumping speed is available. | HiPace 10 Neo |
| Rotational speed is 90,000 min⁻¹ ±2%, and can be varied between 50% and 100%. p.3 ↗ | Speed can be throttled (e.g. to reduce light-gas heating or vibration) via control interface; speed accuracy ±2%. | HiPace 10 Neo |
| Bearing type is a mechanical ball bearing. p.1 ↗ | No magnetic levitation or lubricant circulating system; robust and portable but bearing wear must be considered in maintenance planning (spare parts available). | HiPace 10 Neo |
| Dimensions are 83.4 x 55 x 186 mm (L x W x H) and weight is 1.3 kg. p.3 ↗ | Very small footprint allows integration into compact or portable systems; mounting brackets via mounting kit option. | HiPace 10 Neo |
| Mounting orientation is arbitrary. p.3 ↗ | Pump can be installed in any orientation, simplifying mechanical integration. | HiPace 10 Neo |
| Sound pressure level is <50 dB(A) per EN ISO 2151. p.2 ↗ | Suitable for desktop/laboratory environments without additional noise enclosure. | HiPace 10 Neo |
| Protection class is IP20 type 1. p.2 ↗ | No protection against water/dust ingress; must be installed in a dry, clean environment. | HiPace 10 Neo |
| I/O interfaces are RS485 and remote. p.2 ↗ | Control/monitoring integration via RS485 (e.g. with display unit or pressure sensor) or hardwired remote signals. | HiPace 10 Neo |
| A power failure venting unit and venting accessories are offered as options, plus a safety valve. p.1 ↗ | For unattended operation, specify automatic venting on power failure to protect the process chamber; safety valve protects against overpressure. | HiPace 10 Neo |