No photo available yet
Agilent Technologies 7500 ICP MS
Agilent Technologies 7500 ICP MS — Atomic spectroscopy.
The Agilent 7500 ICP MS is an indoor-only atomic spectroscopy instrument rated for 100 V/50 Hz/11 A supply, installation category II and pollution degree 2. It must operate at 20–30 °C and 20–80 % non-condensing humidity with at least 10 cm clearance on all sides. Its USB ports tolerate ESD up to 8000 V (STM5.1-1998 Class 3B).
Full specifications
| Temperature | 20...30 °C |
| Staining protocols | Opens the file directory to browse stored PCR programs. Use this button to edit or run programs. |
| Installation category mfr | II II |
| Minimum clearance around instrument mfr | 10 cm |
| Use mfr | Indoor Use Only Only |
| SureCycler 8800 instrument base mfr | 1 |
| Thermal block unit (96-well or 384-well)* mfr | 1 |
| Power cord mfr | 1 |
| Functional test certificate mfr | 1 |
| Quick Start installation poster mfr | 1 |
| CD with Setup and User’s Guide PDF mfr | 1 |
| Email mfr | All other countries countries |
| Telephone mfr | UK/Ireland UK/Ireland |
| New Program mfr | Use this button to create a new PCR program. pro |
| PCR Wizard mfr | Use this button to create a new PCR program usin |
| Network Control mfr | Use this button to connect to multiple instrumen |
| Incubate mfr | Starts a single temperature incubation for a pre |
| Reports mfr | Opens the report directory allowing you to brows |
| Login mfr | Opens the Login screen. screen. |
| Settings mfr | Use this button to adjust cycler settings, upgra |
| Guest mfr | • Access rights to the Guest folder • Creating, |
| Electrical supply mfr | 100 V |
| Electrical supply frequency mfr | 50 Hz |
| Electrical supply current mfr | 11 A |
| Electrical supply voltage mfr | 100 V |
| ESD immunity threshold for USB ports mfr | 8000 V |
| USB external drive** mfr | 1 |
| ESD threshold affecting USB ports mfr | 8000 volts |
| Ambient temperature limit | 20...30 °C |
| Pollution degree mfr | 2 |
| Altitude mfr | 2000 m |
| Humidity mfr | 20...80 |
| Use environment mfr | Indoor Use Only Only |
| Operating humidity mfr | 20...80 |
Description
Construction and positioning
- Single indoor-use atomic spectroscopy unit; no sibling models are defined in the verified data, so no series positioning can be asserted.
- Electrical architecture: 100 V, 50 Hz, 11 A supply; installation category II; pollution degree 2; altitude up to 2000 m.
- Minimum 10 cm clearance around the instrument is required; rear air slots must remain unobstructed.
Environmental and thermal behavior
- Operating ambient: 20–30 °C; humidity 20–80 % (non-condensing).
- Maximum gradient temperature difference: 30 °C.
- Maximum temperature-stable material rating: 120 °C; thermal block maximum temperature: 100 °C; heated lid / thermal block surface temperature: 50 °C.
- ESD immunity threshold for USB ports: 8000 V (ESD STM5.1-1998 Class 3B).
Installation and operation
- The attached manual digest describes a thermal cycler base with interchangeable 96-well (G8810A) and 384-well (G8820A) blocks; these block and consumable details belong to that document and are not asserted as 7500 ICP MS specifications.
- No curve points, certificates, applications or sibling models were supplied; performance curves and application claims are therefore omitted.
Integration & Operating Notes
The instrument is rated 100 V, 50 Hz, 11 A with installation category II and pollution degree 2. Verify the branch circuit, breaker and grounding can carry the full 11 A continuously; an undersized or shared circuit risks nuisance trips and invalid runs.
A minimum of 10 cm around the instrument is required, and rear air slots must stay unobstructed. Placing the unit against a wall or stacking equipment closely restricts airflow and can push the ambient above the 20–30 °C operating window.
Operation outside the 20–30 °C ambient or 20–80 % non-condensing humidity range is outside the rated envelope. Locate the instrument away from HVAC drafts and humidity extremes; the allowed maximum gradient temperature difference is 30 °C.
ESD above 8000 V (ESD STM5.1-1998 Class 3B) may interfere with normal USB port operation. In high-static environments, use grounded wrist straps and antistatic measures when connecting USB devices or handling cables near the ports.
Selection & Integration Q&A
The verified data define only this model: 100 V/50 Hz/11 A, installation category II, pollution degree 2, 20–30 °C ambient. No sibling models are listed, so selection against neighbors cannot be justified from the supplied facts; confirm voltage and frequency compatibility with the site supply first.
A 100 V, 50 Hz branch capable of 11 A with category II installation and pollution degree 2, plus an indoor location at 20–30 °C and 20–80 % non-condensing humidity, altitude ≤2000 m, and at least 10 cm clearance on all sides with rear air slots unobstructed.
The verified data list no included accessories, cables or consumables and no service interval. Only the material rating (temperature-stable to 120 °C) and the 100 °C block / 50 °C surface limits are stated; confirm the consumable and cable list with the supplier before commissioning.