BINDER KBF PRO 1060
BINDER ·Made in Germany · In Active Production

BINDER KBF PRO 1060

BINDER KBF PRO 1060 — Climate chambers with Temperature -20…100 °C.

The KBF PRO 1060 is a 1,070 L constant climate chamber with a temperature range of -20 to 100 °C and humidity control from 10 to 98 % RH, extending the standard KBF series into a wider humidity envelope. It is distinguished within the KBF PRO series by its large interior volume and 40 kg per-rack load capacity, making it suited for high-throughput stability and climatic testing of bulky or densely packed samples.

Temperature
-20…100 °C

BINDER KBF PRO Series — Model Comparison & Selection

Model Temperature, °CInterior volume, LLoad per rack, kgMax heat compensation, WNominal power, kWTemperature uniformity, K
KBF PRO 1060 Current -20–10010704010001.90.3
KBF PRO 130 -20–100127304501.90.2
KBF PRO 1600 -20–10016104010001.90.3
KBF PRO 260 -20–100262408001.60.2
KBF PRO 470 -20–100472408001.60.3
KBF PRO 720 -20–1007274010001.80.3

Full specifications

Core Performance & Functional Specifications
Temperature -20...100 °C
Interior volume 1070 L
Load per rack 40 kg
Maximum heat compensation 1000 W
Nominal power 1.9 kW
Temperature fluctuation 0.1 K
Temperature uniformity 0.3 K
Article Number mfr 9020
Recovery time after door was opened for 30 s at 25°C and 60% RH mfr 2 min
Recovery time after door was opened for 30 s at 40°C and 75% RH mfr 6 min
Dimensions, Weight & Mechanical Design
Net weight of the unit (empty) mfr 360 kg
Electrical, Power & Drive Specifications
Power frequency 50 Hz
Rated voltage 208...240 V
Unit fuse 16.0 A
Phase (Nominal voltage) mfr 1
Operating Conditions, Environment & Protection
Humidity fluctuation 1 % RH
Humidity range 10...98 % RH

Description

Construction and Series Positioning

Behavior Under Load and in Different Media

Installation, Connection and Control

Integration & Operating Notes

Mounting
Maintain wall distance with spacer from size 260

The KBF PRO 1060 requires a wall spacer to maintain the specified distance from adjacent surfaces. Insufficient clearance can impair heat dissipation and humidity control, leading to reduced performance or chamber faults.

Operating Manual, Section 4.1 Installation
Electrical
Verify site supply matches 208–240 V, 1~, 50 Hz rating

The chamber is rated for 208…240 V, single-phase, 50 Hz with a 16 A unit fuse and 1.9 kW nominal power. Connecting to a different voltage or frequency may damage the unit and void warranty; ensure overcurrent protection is correctly sized.

Data Sheet Model KBF PRO 1060; Operating Manual, Section 1.6 Type Plate
Process Limits
Humidity control limited to 10–90 °C and 10–98 % RH

Although the chamber operates from -20 to 100 °C, humidity control is only active between 10 and 90 °C and within 10…98 % RH. Operating humidity outside these limits may not be possible or may compromise accuracy.

Factory Specification Sheet; Operating Manual, Section 18 Humidification/Dehumidification System
Process Limits
Do not exceed 1,000 W heat compensation load

The chamber can compensate a maximum heat load of 1,000 W from samples or equipment. Exceeding this value may prevent the chamber from maintaining set temperature, especially at low setpoints, and can lead to extended recovery times or alarms.

Factory Specification Sheet
Process Limits
Observe humidity sensor chemical tolerance limits

The humidity sensor must not be exposed to substances above the listed tolerated concentrations, such as ammonia (20 ppm TLV, 5500 ppm permanent load), acetone (500 ppm TLV, 3300 ppm permanent load), or formaldehyde (0.3 ppm TLV, 2400 ppm permanent load). Exceeding these limits can damage the sensor and invalidate humidity readings.

Operating Manual, Section 1.14 Humidity Sensor Resistance Table
Maintenance
Schedule annual maintenance and condenser cleaning twice yearly

Regular maintenance must be performed at least once a year, including steam humidifier maintenance. Condensers should be cleaned at least twice a year by a qualified technician; in dusty environments, clean more frequently by suction. Warranty may be void if maintenance is not conducted by authorized personnel.

Operating Manual, Section 23.2 Maintenance and Service
Maintenance
Plan service reset at 8760 operating hours or two years

After 8760 operating hours or two years, a maintenance message appears and repeats every two weeks until reset by BINDER Service. Schedule the service reset before this interval to avoid recurring reminders and to maintain warranty compliance.

Operating Manual, Section 23.2 Maintenance and Service
Maintenance
Refrigeration work requires EN 13313:2010 certified personnel

The refrigeration system contains flammable R600A refrigerant. Any maintenance on the refrigeration system must only be conducted by qualified personnel trained according to EN 13313:2010 (e.g., refrigeration technician with certified expert knowledge per Regulation (EC) No. 303/2008).

Operating Manual, Section 23.2 Maintenance and Service
Electrical
Perform electrical safety test before first start and annually

An annual repeat inspection and a test prior to initial startup and prior to resuming operation after maintenance or repair are required, recommended under EN 50678/VDE 0701 and EN 50699/VDE 0702. Include these tests in commissioning and maintenance schedules.

Operating Manual, Section 23.1 Testing
Process Media
Identify serial number for correct humidification plumbing

The humidifying system and wastewater/condensate handling differ up to serial number 20250000010225 and from serial number 20250000010226. Before connecting freshwater and wastewater, confirm the chamber serial number to select the correct connection method and spare parts.

Operating Manual, Sections 18.1.1–18.1.5 Humidification/Dehumidification System

Selection & Integration Q&A

When should I choose the KBF PRO 1060 over the smaller KBF PRO 260 or the larger KBF PRO 1600?

Choose the 1060 for high-throughput testing of bulky or densely packed samples requiring up to 1,070 L and 40 kg per rack. The 260 suits smaller batches; the 1600 offers more volume but may exceed space or utility capacity.

What are the requirements for the freshwater and wastewater connections to the KBF PRO 1060?

The chamber requires freshwater and wastewater connections for humidity control. The connection method depends on serial number (up to or from 20250000010225/20250000010226). Ensure supply pressure does not exceed 11 bar and use appropriate tubing.

What maintenance items and accessories are not included in the base delivery of the KBF PRO 1060?

Base delivery excludes APT-COM 4 software, analog outputs, zero-voltage alarm contacts, internal LED light, door lock, flexible Pt 100 sensor, external freshwater/wastewater cans, and BINDER Pure Aqua Service. Annual maintenance and condenser cleaning are also not included.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Data Sheet Model KBF PRO 1060 en
Datasheet ·783,0 КБ ·9 pp.
View PDF
PDF
KBF+KBF PRO (E7) 09 2025 en
Manual ·16,5 МБ ·171 pp.
View PDF