Peter Huber Kältemaschinenbau CC-315B Wärme-Badumwälzthermostat
Peter Huber Kältemaschinenbau ·Made in Germany · In Active Production

Peter Huber Kältemaschinenbau CC-315B Wärme-Badumwälzthermostat

Peter Huber Kältemaschinenbau CC-315B Wärme-Badumwälzthermostat — Thermostatic baths.

The CC-315B is a 15.6-litre stainless-steel bath circulator with a variable-speed pressure/suction pump and Pilot ONE controller, rated for up to 300 °C. Its base range is 28–300 °C, extended to 20–300 °C with water cooling or −20–300 °C with a refrigerator. It serves as a precise (±0.02 K) thermal source for external circuits and bath immersion.

Direct drop-in replacements

Eppendorf
MixMate ®
58%
match
⚖️ Compare

Peter Huber Kältemaschinenbau Mit Edelstahlbaedern Bis 300C Series — Model Comparison & Selection

Model Current consumption, ADimensions w d hFuse rating, AWeight, kgAmbient temperature limit, °CController
CC-315B Wärme-Badumwälzthermostat Current 16335 x 382 x 43320225–40Pilot ONE
CC-304B Wärme-Badumwälzthermostat 14210 x 335 x 39216145–40Pilot ONE
CC-308B Wärme-Badumwälzthermostat 14242 x 404 x 39216185–40Pilot ONE

Full specifications

Core Performance & Functional Specifications
Dimensions (w × D × H) 335 x 382 x 433 mm
Maximum delivery flow rate 25 l/min (pressure pump; 0, 7 bar)
Pump connection M16x1 AG male
Pump speed adjustable Yes
Pump type Pressure and suction pump, variable speed
External sensor connection Pt100
Temperature range 28...300 °C
with cooling unit: -20...300 °C · with water cooling: 20...300 °C
Temperature stability mfr ±0, 02 K
Heating capacity mfr 3 - 3, 5 kW
Delivery capacity suction pump max. mfr 18, 5 l/min (suction pump; 0, 4 bar)
Bath opening WxD/BD mfr 270 x 145 / 200 (WxD/depth)
Bath volume mfr 15, 6 l
Filling volume min. mfr 11, 5 l (minimum)
Dimensions, Weight & Mechanical Design
Weight 22 kg
Electrical, Power & Drive Specifications
Current consumption 16 A (max.)
Fuse rating 20 A
Power supply 200-240V 1~/2~ 50/60Hz
Interfaces, Connections & Control
Controller Pilot ONE
Digital interface Ethernet, USB (Host u. Device), RS232
Materials, Media & Process Compatibility
Maximum viscosity 50 mm²/s
Operating Conditions, Environment & Protection
Ambient temperature limit 5...40 °C
Protection rating IP20
Standards, Safety & General Data
Safety class III / FL

Description

Construction and series positioning

The CC-315B is the 15.6-litre member of the CC-B series of stainless-steel bath circulators rated to 300 °C. It uses a pressure-and-suction pump with variable speed, a Pilot ONE controller, and a bath opening of 270 × 145 mm (200 mm deep). Compared with the smaller CC-304B and CC-308B siblings, it offers the largest bath volume and the highest heating capacity (3–3.5 kW), making it suited to larger sample loads or higher heat-demand external loops. The wetted circuit is stainless steel; the unit is IP20 and weighs 22 kg.

Thermal behaviour and media

Temperature stability is ±0.02 K. The achievable range is configuration-dependent: 28–300 °C as standard, 20–300 °C with water cooling, and −20–300 °C with an integrated refrigerator. The bath fluid must have a kinematic viscosity no higher than 50 mm²/s. Minimum filling is 11.5 l; with a displacement rack the usable bath capacity drops to 8.5 l. The pressure pump delivers up to 25 l/min at 0.7 bar; the suction pump up to 18.5 l/min at 0.4 bar. Adjustable overtemperature protection per DIN 12876 is provided.

Installation, control and operation

The unit accepts 200–240 V single- or two-phase 50/60 Hz supply, drawing up to 16 A with a 20 A fuse; external branch protection to UL 489 is required. Voltage and frequency tolerances are ±10% and must not oppose each other. Pump ports are M16×1 male. Control and data interfaces include Ethernet, USB host and device, RS232, and a Pt100 external sensor input. Ambient temperature must remain 5–40 °C in a dry indoor location.

Integration & Operating Notes

Electrical
Supply must be sized for 16 A with 20 A branch protection

The 200–240 V 1~/2~ supply draws up to 16 A and requires a 20 A fuse plus external UL 489 branch protection. Undersized wiring or breakers will trip under full heating load, and the ±10% voltage/frequency tolerance must not run in opposite directions.

CC-315B Immersion Circulator Technical Data, page 1–2
Process Limits
Temperature range depends on the cooling method selected

Without auxiliary cooling the unit operates 28–300 °C; water cooling extends the low end to 20 °C and a refrigerator to −20 °C. The cooling option must be chosen at selection because the base unit cannot reach sub-28 °C temperatures on its own.

CC-315B Immersion Circulator Technical Data, page 1
Cooling & Media
Bath fluid viscosity must not exceed 50 mm²/s

Higher-viscosity fluids overload the pressure/suction pump and reduce circulation. Select a thermofluid rated for the full 300 °C top temperature and verify its kinematic viscosity at the lowest operating temperature stays within 50 mm²/s.

CC-315B Immersion Circulator Technical Data, page 1
Process Limits
Plan fluid charge between 11.5 l minimum and 15.6 l bath volume

Minimum filling is 11.5 l; the bath holds 15.6 l. A displacement rack reduces usable capacity to 8.5 l, so sample volume and expansion space must be accounted for to avoid starving the pump or overflowing at 300 °C.

CC-315B Immersion Circulator Technical Data, page 1
Control & I/O
Configure adjustable overtemperature cut-out before running

The DIN 12876 overtemperature protection setpoint must be set above the process temperature but below the fluid's limit. It acts as an independent safety cut-out if the Pilot ONE control or sensor fails, protecting the bath and external circuit.

CC-315B Immersion Circulator Technical Data, page 1

Selection & Integration Q&A

When should I choose the CC-315B rather than the CC-304B or CC-308B?

Pick the CC-315B when you need the largest bath volume (15.6 l) and highest heating capacity (3–3.5 kW) of the series, e.g. for larger sample racks or high-heat external loops. The smaller CC-304B/CC-308B suit lower-volume or lower-heat-demand work.

What external circuit pressure drop can the pump overcome, and what fittings mate with it?

The pressure pump delivers up to 25 l/min at 0.7 bar and the suction pump 18.5 l/min at 0.4 bar. Ports are M16×1 male, so hoses and adapters must match that thread; check the external loop's pressure drop against these heads.

What is not included in base delivery that I must plan for?

A country-specific plug is supplied only if specified at ordering; three-phase units under 63 A ship with cable but no plug. External UL 489 branch protection, bath fluid, hoses/adapters for M16×1 ports, and any cooling-water supply or refrigerator option are not part of the base unit.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
CC-315B Immersion Circulator Technical Data
Datasheet ·68,6 КБ ·2 pp.
View PDF