Nabertherm LE 6/11
Nabertherm LE 6/11 — Dental burnout furnaces.
The LE 6/11 is a 6-litre, single-phase dental burnout furnace with a 1100 °C maximum working temperature and 2 kW nominal power. Its 170 × 200 × 170 mm chamber and 27-minute heating time distinguish it from the smaller LE 1/11 in the LE ../11 series. It is used to eliminate wax patterns from investment molds prior to casting.
Nabertherm LE Series — Model Comparison & Selection
| Model | Chamber volume, L | Temperature uniformity, K | Weight, kg | Electrical connection | Max temperature, °C |
|---|---|---|---|---|---|
| LE 6/11 Current | 6 | 393.1 | 27 | 1-phase | 1100 |
| LE 1/11 | 1 | 313.1 | 15 | 1-phase | 1100 |
Full specifications
| Chamber volume | 6 l |
| Chamber volume | 6 l |
| Electrical connection | 1-phase |
| Electrical connection | 1-phase |
| Nominal power | 2 kW |
| Temperature uniformity | 120 °C |
| Temperature uniformity | 120 °C |
| Heating time mfr | 27 min |
| Inner dimensions (W × D × H) mfr | 170 × 200 × 170 mm |
| Outer dimensions (W × D × H) mfr | 390 × 385 × 470 mm |
| Muffle type mfr | 2 |
| Weight | 27 kg |
| Weight | 27 kg |
| Max temperature | 1100 °C |
| Max temperature | 1100 °C |
Description
Construction and series positioning
- The LE 6/11 is the 6-litre member of the LE ../11 burnout furnace series; the only listed sibling is the LE 1/11, which has a smaller chamber.
- Chamber dimensions are 170 × 200 × 170 mm (W × D × H); outer dimensions are 390 × 385 × 470 mm, and the unit weighs 27 kg.
- Electrical connection is single-phase with 2 kW nominal power; maximum temperature is 1100 °C.
- Temperature uniformity is stated as 120 °C (tier-2 value; no measurement conditions are supplied).
Thermal behavior
- Heating time to working temperature is 27 minutes (factory extra spec; no test condition given).
- No digitized curve points are available for this model, so no load-dependent or media-dependent behavior can be quantified beyond the listed heating time and uniformity figure.
Control and operation
- The attached document digests do not contain actionable engineering facts specific to the LE 6/11; controller details from the general 'Prozesssteuerung englisch' digest are not model-specific and are therefore not asserted here.
- No installation, connection, or control specifics for this model can be extracted from the supplied PDF digests.
Integration & Operating Notes
The maximum working temperature is 1100 °C. Exceeding it risks damage to the heating elements and chamber insulation. The 120 °C temperature uniformity figure means the working zone should be planned around that spread when placing investment molds.
Selection & Integration Q&A
Choose the LE 6/11 when the 6-litre chamber (170 × 200 × 170 mm) is needed for larger or multiple investment molds. The LE 1/11 has a smaller chamber; select it only when batch size fits its reduced volume. Both share the 1100 °C class.
The verified facts and attached document digests contain no maintenance schedule, service intervals, or accessory list for this model. Controller options mentioned in the general controller digest are not confirmed as supplied with the LE 6/11; confirm the delivery scope with the order documentation.