Nabertherm RHTH 120/600/..
Nabertherm ·Made in Germany · In Active Production

Nabertherm RHTH 120/600/..

Nabertherm RHTH 120/600/.. — Tube furnaces.

The RHTH 120/600/.. is a horizontal high-temperature tube furnace accepting tubes up to 120 mm outer diameter, with a 600 mm heated length and 1800 °C maximum temperature. Its 14.8 kW three-phase connection and 830 mm tube length distinguish it from the smaller RHTH 80/300/.. sibling. It serves as a high-temperature process stage for tube-contained samples requiring controlled atmosphere or vacuum.

Nabertherm RHTH Series — Model Comparison & Selection

Model Max temperature, °CWeight, kgElectrical connection
RHTH 120/600/.. Current 18001103-phase4
RHTH 80/300/.. 1700903-phase4

Full specifications

Core Performance & Functional Specifications
Electrical connection 3-phase4
Nominal power 14.8 kW
Max. outer tube Ø mfr 120
Outer dimensions (W × D × H) mfr 550 × 640 mm
Dimensions, Weight & Mechanical Design
Weight 110 kg
Heated length mfr 600
Tube length mfr 830
Operating Conditions, Environment & Protection
Max temperature 1800 °C

Description

Construction and series positioning

Thermal behavior

Electrical and control

Documentation scope

Integration & Operating Notes

Electrical
Confirm supply voltage against nameplate before connection

The verified facts state a 3-phase, 4-wire connection and 14.8 kW nominal power but give no voltage. The supply must be matched to the nameplate rating; connecting to an assumed voltage risks overcurrent or underpowered operation, and the 14.8 kW load requires a dedicated three-phase circuit sized for continuous furnace duty.

Factory Specification Sheet
Process Limits
Tube outer diameter must not exceed 120 mm

The 120 mm figure is the maximum outer tube diameter the furnace accepts. An oversized tube will not seat correctly in the furnace bore and can cause mechanical damage or unacceptable temperature distribution; tube selection must also account for the 830 mm tube length and the 600 mm heated zone.

Factory Specification Sheet
Process Limits
Constant-temperature length depends on the stated condition

The constant-temperature zone is listed as 200 mm under one condition and 300 mm under another. Workpieces requiring a defined uniform zone must be placed according to the condition actually used; treating the larger figure as universal can place samples outside the uniform region.

Factory Specification Sheet
Control & I/O
Controller functions are documented only at series level

The available controller document covers Nabertherm series 500 and the MyNabertherm app, including process data storage and AMS2750F instrumentation types, but does not confirm which controller is fitted to this model. Control configuration and any recorder option must be specified at order.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the RHTH 120/600/.. instead of the smaller RHTH 80/300/..?

Choose the 120/600/.. when the process needs tubes up to 120 mm outer diameter and a 600 mm heated length at up to 1800 °C. The RHTH 80/300/.. is the smaller sibling; select it only when its smaller bore and shorter heated length fit the workload, since the 120/600/.. provides the larger tube capacity.

What supply and tube hardware must be prepared around this furnace?

A 3-phase, 4-wire circuit rated for 14.8 kW is required, with voltage confirmed from the nameplate since no voltage is stated. The process tube must not exceed 120 mm outer diameter and should be about 830 mm long to span the 600 mm heated zone with cold ends for connections.

What is included in base delivery and what must be ordered separately?

The verified facts list only the furnace itself: no tube, controller configuration, recorder, thermocouple or process-gas fittings are confirmed as included. The controller document describes series 500 and MyNabertherm functions as options, so controller, recorder and tube accessories should be specified explicitly at order.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF