Instruction Manual - Installation
Technical Reference Summary
Covered Models & Document Scope
This document (347-05511C, May 2021) covers the installation of CFT-EX PC software and USB driver for the SHIMADZU FLOWTESTER CFT-500EX/100EX. It applies to Windows 10 (64-bit) and Windows 7 (32-bit and 64-bit) host PCs.
Section-by-Section Technical Breakdown
Describes installing the CFT-EX PC software from the Setup CD-ROM. The PC must be started with administrator authority. The procedure covers launching setup.exe, selecting language, choosing an installation folder, and completing the Setup Wizard.
- Start the PC with administrator authority before installation.
- Insert the CFT-EX Setup CD-ROM and run [\DISK1\setup.exe] (may display as 'setup').
- Select the setup language in the Select Setup Language dialog and click [OK].
- The default installation destination is C:\CFT; sample test data are installed in C:\CFT\Sample.
- To uninstall, use Control Panel > Uninstall a program and select 'CFT-EX'.
Explains how to install the USB driver required for PC-to-instrument communication. The correct driver executable depends on the Windows version and system type (32-bit or 64-bit).
- For Windows 10, run \Driver\Windows10\DPInst64.exe.
- For Windows 7 32-bit, run \Driver\Windows7\32bit\DPInst.exe.
- For Windows 7 64-bit, run \Driver\Windows7\64bit\DPInst64.exe.
- Confirm the system type via Control Panel > System and Security > System.
- Follow the installation wizard instructions to complete driver installation.
The instrument has a USB connector on the rear panel. Connect the PC and the unit using the USB cable.
- USB connector is located on the back of the unit.
- Connect the PC and the unit with the USB cable.
Describes enabling and using the Windows touch keyboard and On-Screen keyboard for touch panel operation without a mouse or physical keyboard. Notes feature differences and the need to install the touch panel display driver first.
- Touch keyboard: large keys for finger touch; numeric keypad and system keys cannot be used.
- On-Screen keyboard: supports numeric keypad and system keys like a physical keyboard.
- Enable touch keyboard via right-click taskbar > 'Show touch keyboard button'.
- Enable On-Screen keyboard via Settings > Ease of Access > Keyboard > 'Use the On-Screen Keyboard'.
- The touch panel display driver must be installed before touch panel functions can be enabled.
Warns that PC sleep and hard disk turn-off settings can cause loss of communication between the PC and testing machine. Sets these power options to 'Never'.
- Set [Sleep] and [Turn off hard disks] to [Never] via Control Panel > System and Maintenance > Power Options.
- Failure to do so may cause connection loss during communication.
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Applies To |
|---|---|---|
| The PC must start by the administrator authority for CFT-EX software installation and uninstallation. p.5 ↗ | Ensure administrator rights are available before starting installation or removal. | CFT-500EX/100EX with CFT-EX software |
| Setup executable is located at [\DISK1\setup.exe] on the CFT-EX Setup CD-ROM. p.5 ↗ | Launch this file to begin installation; it may be displayed as 'setup'. | CFT-EX software |
| Default installation destination is C:\CFT; sample test data are installed in C:\CFT\Sample. p.7 ↗ | Sample data are for explanation only; plan disk space and folder permissions accordingly. | CFT-EX software |
| For Windows 10, the USB driver executable is \Driver\Windows10\DPInst64.exe. p.9 ↗ | Use this driver on Windows 10 systems. | CFT-500EX/100EX USB driver |
| For Windows 7 32-bit, the USB driver executable is \Driver\Windows7\32bit\DPInst.exe. p.9 ↗ | Confirm 32-bit system type before running this driver. | CFT-500EX/100EX USB driver |
| For Windows 7 64-bit, the USB driver executable is \Driver\Windows7\64bit\DPInst64.exe. p.9 ↗ | Confirm 64-bit system type before running this driver. | CFT-500EX/100EX USB driver |
| System type (32-bit or 64-bit) is checked via Control Panel > System and Security > System. p.9 ↗ | Verify OS architecture before selecting the USB driver folder. | CFT-500EX/100EX USB driver |
| USB connector is located on the back of the unit. p.11 ↗ | Route the USB cable to the rear panel for PC connection. | CFT-500EX/100EX |
| Set [Sleep] and [Turn off hard disks] to [Never] in Power Options. p.7 ↗ | Prevents loss of communication between PC and testing machine during idle periods. | CFT-500EX/100EX with PC |
| Touch keyboard cannot use the numeric keypad and system keys (non-character keys). p.13 ↗ | Use On-Screen keyboard when numeric keypad or system keys are required. | Touch panel display operation |
| On-Screen keyboard supports keys with the same function as a physical keyboard, including numeric keypad and system keys. p.13 ↗ | Select On-Screen keyboard for full key functionality on touch panel displays. | Touch panel display operation |
| The touch panel display driver must be installed before touch panel functions can be enabled. p.16 ↗ | Install the display driver per the display's manual prior to configuring touch keyboard. | Touch panel display operation |
| Once On-Screen Keyboard is closed, it must be re-enabled from the Settings window. p.16 ↗ | Minimize rather than close the On-Screen keyboard to avoid repeated setup. | Touch panel display operation |
Faults & Troubleshooting
| Code / Symptom | Possible Cause | Remedy | Note |
|---|---|---|---|
| connection may be lost during communication between the PC and testing machine p.7 ↗ | Depending on the [Sleep] and [Turn off hard disks] settings on the PC | Select [Start] - [Control Panel] - [System and Maintenance] - [Power Options]. Set the [Sleep] and [Turn off hard disks] settings to [Never]. | CAUTION on p.7 |