Nabertherm KB 360/12
Nabertherm KB 360/12 — Tilting Furnaces Electrically Heated Or Gas Fired.
The KB 360/12 is a gas-fired tilting furnace from Nabertherm's KB series, equipped with a TBN 800 crucible and rated for a maximum temperature of 1200 °C. It holds a melt capacity of 750 kg and delivers a melting performance of 420 kg/h, positioning it between the KB 150/12 and KB 400/12 siblings for medium-to-high throughput foundry melting and holding.
Nabertherm KB Series — Model Comparison & Selection
| Model | Weight, kg | Max temperature, °C |
|---|---|---|
| KB 360/12 Current | 3300 | 1200 |
| KB 400/12 | 3600 | 1200 |
Full specifications
| Crucible mfr | TBN 800 |
| Capacityin kg mfr | 750 |
| Burneroutput mfr | 450 |
| Melting performance3,6in kg mfr | 4201 |
| Consumptionmelting6kWh mfr | 1.0 - 1.31 |
| ConsumptionholdingLid closed mfr | 17 |
| Outer dimensions (W × D × H) mfr | 1890 × 2080 mm |
| Weight | 3300 kg |
| Max temperature | 1200 °C |
Description
Construction and series positioning
- The KB 360/12 is a tilting furnace with a gas burner (burner output 450) and a TBN 800 crucible, designed for melting and holding metals at up to 1200 °C.
- Within the KB gas-fired series, it sits between the smaller KB 150/12 and the larger KB 400/12, offering a 750 kg capacity that suits foundries requiring a balance between batch size and floor space.
- Outer dimensions of 1890 × 2080 mm (W × D) and a weight of 3300 kg indicate a heavy, stationary installation; the tilting mechanism allows controlled pouring.
Thermal performance and operation
- Melting performance is stated as 420 kg/h (likely at optimal conditions), with energy consumption for melting between 1.0 and 1.3 kWh per kg (the raw value '1.0 - 1.31' is interpreted as a range, with the trailing '1' likely a footnote marker).
- Holding consumption with the lid closed is 17 kWh (presumably per hour or per batch; the unit is not specified in the source).
- No digitized curve points are available, so behavior under part-load or with different materials cannot be quantified from the provided data.
Control and integration
- The attached controller document covers Nabertherm's standard 500 series and MyNabertherm app, but no specific controller is listed for this model. Integration with a furnace control system would typically involve temperature control and safety interlocks, but details are not provided in the verified facts.
- The foundry catalog digest lists the KB series but does not include model-specific installation or connection data. Therefore, electrical supply, gas supply, and flue requirements must be confirmed with the manufacturer.
Integration & Operating Notes
The maximum temperature of 1200 °C is a hard limit for the furnace lining and crucible. Exceeding it can lead to accelerated wear, crucible failure, or unsafe operation. The control system should be configured with an over-temperature cutout set below this value.
The furnace weight of 3300 kg is the empty weight; with a 750 kg melt, the total exceeds 4 tonnes. The tilting action introduces dynamic forces, so the foundation must be designed for the combined static and dynamic loads. Consult structural engineering and Nabertherm installation guidelines.
The stated melting performance of 420 kg/h is likely based on a specific charge material and operating regime. Actual throughput may vary with alloy, charge shape, and burner settings. Plan production schedules with margin and validate with trial melts.
The TBN 800 crucible is a consumable; inspect for cracks, erosion, and buildup. Burner components require periodic cleaning and adjustment to maintain efficiency and safe combustion. Follow Nabertherm's maintenance schedule, though specific intervals are not provided in the verified facts.
Selection & Integration Q&A
Choose the KB 360/12 for a 750 kg melt capacity and 420 kg/h melting performance, filling the gap between the KB 150/12 (smaller) and KB 400/12 (larger). Select the KB 150/12 for lower throughput or space constraints, and the KB 400/12 for higher capacity. All share the 1200 °C limit and gas firing.
The KB 360/12 is gas-fired with a burner output of 450 (unit not specified). The gas supply must match the burner's requirements for pressure and flow, and a suitable flue or exhaust system must be installed to safely remove combustion products. Specific gas type, pressure, and flue dimensions are not provided in the verified facts; consult Nabertherm.
The base delivery includes the furnace with TBN 800 crucible, but consumables such as crucible coatings, degassing tablets, and burner nozzles are not included. A temperature controller and thermocouples may be optional; the attached controller document describes Nabertherm's 500 series and MyNabertherm app, but these must be ordered separately. Confirm the scope of supply with Nabertherm.