No photo available yet
Agilent Technologies Handheld FTIR, Mobile Nondestructive Testing
Agilent Technologies Handheld FTIR, Mobile Nondestructive Testing — Molecular spectroscopy.
The Agilent 4300 is a handheld mid-IR FTIR spectrometer for nondestructive testing, using optically matched sample interfaces and a germanium ATR crystal with 0.5–2 µm sampling depth at an 82° angle of incidence. It weighs 5 lbs and runs Agilent MicroLab software. Within the FTIR Compact Portable Systems series, it is the handheld, field-deployable modification for direct surface analysis without sample preparation.
Agilent Technologies FTIR Compact Portable Systems Series — Model Comparison & Selection
| Model | Wavelength range | Weight, kg | Analysis time, min | Dimensions, mm | Power supply | Protection rating |
|---|---|---|---|---|---|---|
| Handheld FTIR, Mobile Nondestructive Testing Current | — | 2.27 | — | — | — | — |
| 4200 FlexScan | 4000...650 | — | — | — | — | — |
| 4500 Portable FTIR Spectrometer, Rugged Non-Lab Analyzer | — | 3.6 | less than two minutes | 203 | battery or mains | 54 |
| Compact FTIR Spectrometer, At-side FTIR Analyzer | — | 3.6 | less than two minutes | 203 | battery or mains | 54 |
Full specifications
| Software | Agilent MicroLab |
| Measurement mode mfr | handheld, nondestructive, mid-IR IR |
| Angle of incidence mfr | 82 ° |
| Weight | 5 lbs |
| Germanium ATR sampling depth mfr | 0.5...2 micrometers |
| Sample interface mfr | optically matched sample interfaces interfaces |
Description
Construction and positioning
- Handheld, nondestructive mid-IR spectrometer; no sample preparation required.
- Uses optically matched sample interfaces; germanium ATR crystal provides 0.5–2 µm sampling depth at 82° incidence.
- Weighs 5 lbs (2.27 kg), enabling one-handed field use.
- Series siblings include the 4200 FlexScan, 4500 Portable FTIR, and Compact FTIR Spectrometer; the 4300 is the handheld variant for direct surface measurement.
Behavior and measurement
- Mid-IR ATR sampling: the 82° angle and 0.5–2 µm depth target surface layers, not bulk transmission.
- Nondestructive mode means the sample is measured as-is; no curve points or dynamic ranges are provided in the verified facts.
- Software: Agilent MicroLab for method-driven analysis.
Installation and operation
- No electrical, environmental, or control specifications are included in the verified facts; the attached document digest (5991 4067EN LR) contains no actionable engineering facts.
- Operation is handheld; sample interface is optically matched to the spectrometer.
- No certificates or applications are listed.
Integration & Operating Notes
The germanium ATR crystal samples only 0.5–2 µm deep at 82° incidence. Bulk composition or subsurface layers are not probed; results represent the immediate surface. Ensure the sample surface is representative and in full contact with the crystal.
Agilent MicroLab is the specified software. No interface details (USB, wireless, etc.) are provided in the verified facts; confirm host connectivity and power requirements with Agilent before deployment.
Selection & Integration Q&A
Choose the 4300 for true handheld, nondestructive surface analysis with an 82° Ge ATR interface (0.5–2 µm depth) and 5 lb weight. The 4200 FlexScan and 4500 Portable are separate series siblings; their specs are not in the verified facts, so compare their portability and sampling modes directly with Agilent.
The 4300 uses optically matched sample interfaces and Agilent MicroLab software. No drive, power supply, controller, or mating flange specifications are given in the verified facts. Confirm host computer requirements, power, and any interface accessories with Agilent before integration.
No maintenance schedule, service intervals, or included accessories are specified in the verified facts. The ATR crystal requires routine cleaning; confirm cleaning kits, calibration standards, and carrying cases as separate items with Agilent. The base delivery contents are not listed.