No photo available yet

Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Helium Leak Detector, Benchtop, HLD BR30, Rapid Test Cycle

Agilent Technologies Helium Leak Detector, Benchtop, HLD BR30, Rapid Test Cycle — Vacuum technologies.

The HLD BR30 is a benchtop helium mass spectrometer leak detector built around a 50 L/s diffusion pump, positioned in the HLD bench series as the rapid-test-cycle rotary-vane variant. It is distinguished from the dry BD30 by its oil-based diffusion high-vacuum stage and from the BR15 by its larger backing pump. It serves production and lab leak testing where fast cycle time matters more than oil-free operation.

Agilent Technologies Helium Mass Spectrometer Leak Detectors Hld Series — Model Comparison & Selection

Model Diffusion pump pumping speed, L/s
Helium Leak Detector, Benchtop, HLD BR30, Rapid Test Cycle Current 50
HLD BR15 50

Full specifications

Core Performance & Functional Specifications
Diffusion Pump Pumping Speed 50 L/s
Vacuum gauge measurement range mfr 6 pressure
Dry scroll pump typical size mfr 3...30 h
Turbomolecular pump pumping speed mfr 70...3 L/s
Interfaces, Connections & Control
Turbomolecular pump controller protection class mfr 54
Touchscreen languages mfr 8 languages
Standards, Safety & General Data
Warranty mfr 2 years

Description

Construction and series positioning

Behavior and operating envelope

Control and operation

Integration & Operating Notes

Maintenance
Rotary-vane and diffusion-pump oil service is part of ownership

Because this is the R (rotary-vane) variant with a diffusion high-vacuum stage, oil condition and oil changes for both stages are recurring service items that the dry BD-series avoids. Budget consumables and service intervals accordingly; the verified facts do not state specific oil-change intervals.

Factory Specification Sheet; HLD Brochure 5991-9065DEE

Selection & Integration Q&A

When should I choose the HLD BR30 over the BR15 or the dry BD30?

Pick BR30 when rapid test cycles are the priority and a rotary-vane backing stage is acceptable. Choose BR15 if the smaller backing stage matches your chamber volume and you want the same rotary-vane architecture. Choose BD30 when oil-free operation is mandatory and you can accept the dry backing stage instead of the diffusion-pumped rapid-cycle configuration.

What adjacent equipment must be planned around the BR30's diffusion-pumped architecture?

The rotary-vane backing pump is part of the R configuration and must be installed with the instrument; the diffusion stage depends on that backing stage holding foreline pressure. Test-chamber connections and helium supply are application-side. No turbomolecular controller is used on this diffusion-pumped model, so IP54 turbomolecular controller data from the factory sheet does not apply here.

What mounting and duty-cycle limits apply to the BR30 in a production cell?

It is a benchtop instrument, so it needs a stable bench with ventilation for the instrument and the separate rotary-vane backing pump. Rapid test cycling is the intended mode, but sustained cycling depends on the backing stage keeping foreline pressure within the diffusion pump's tolerance. The verified facts give no specific ambient temperature, clearance or duty-cycle percentage, so confirm these in the model manual.

What maintenance and consumables should be budgeted beyond the base instrument?

The base delivery does not include the rotary-vane backing pump oil and diffusion-pump oil, which are recurring consumables for this R-variant. Oil changes and pump servicing are the main scheduled maintenance; the dry BD-series avoids these. The 2-year warranty is stated, but specific service intervals and accessory cable lists are not in the verified facts and must come from the model manual.

Dimensional Drawings & Technical Documentation

Technical documentation